Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Jet JSG-6DC belt and disc sander combines a 12 inch disc with a 6 x 48 inch belt to put both flat work and edge work on one machine, which keeps sanding setups concentrated in a single station. The powerful 1-1/2 HP motor delivers raw industrial sanding power, so heavy stock removal and wider parts stay moving without stalling. The open stand configuration positions the working height for comfortable control around the disc or belt. The 6 inch belt layout supports long edges, while the 12 inch disc handles end grain and tight control cuts in one footprint. This combination layout matters in a small or busy shop where machine floor space is limited but different sanding faces are needed through the day.
The open stand design carries the Jet Tools 708599K sander at a fixed working height, which sets both the 12 inch disc and 6 x 48 inch belt for straightforward access from the front and sides. The single 4 inch dust port at the back of the base ties the machine into an existing dust collection line, which keeps hose routing to one connection instead of two separate branches. The built-in handles make moving the machine into its spot in the shop more manageable, which helps when aligning the stand with surrounding benches or outfeed setups. The quick-release belt tension lever and quick-lock disc dust cover also play into setup, because abrasive changes can be handled during initial layout without disassembling guards.
The JSG-6DCK 6 x 48 belt and 12 inch disc layout puts a long belt surface beside a broad disc, which lets one machine handle edge straightening, end work, and face touch-ups in sequence. The 6 inch belt length supports longer edges or rails on the graphite covered steel platen, so parts can ride a stable surface with reduced heat transfer into the workpiece. At the same time, the 12 inch disc offers a wide, flat reference for squaring ends or cleaning smaller parts. The powerful 1-1/2HP motor inside the Jet JSG-6DC belt and disc sander keeps both sanding faces driven from one power source, which means switching from belt to disc work does not sacrifice torque.
The exclusive dual thumbscrew belt tracking adjustment on this industrial 1.5 HP belt disc sander lets you dial in belt alignment, then lock the setting, which keeps the belt running true across the platen and reduces edge fraying of the abrasive. That locked tracking matters when sanding multiple identical parts, because the belt contact area stays consistent from piece to piece. The graphite covered steel platen running cooler under the belt supports more uniform cutting over longer passes, which helps keep scratch patterns even from one end of a workpiece to the other. The quick release belt tension lever shortens downtime between grits, so you can move from aggressive stock removal to finer cleanup while the workholding and fence positions remain undisturbed. The quick lock disc dust cover keeps disc changes straightforward, which supports keeping fresh abrasive on the 12 inch disc for more predictable control cuts. The single 4 inch dust port pulling from both belt and disc reduces airborne dust at the contact points, which improves visibility of layout lines while you work. Built-in handles tie into shop flexibility, because the machine can be shifted to support different work cells without changing the sanding feel or setup features.
The Jet Tools 708599K provides a 6 x 48 inch belt and a 12 inch disc, which lets one machine handle longer edge sanding on the belt and more precise end or small-part sanding on the disc.
The dual thumbscrew belt tracking adjustment locks the belt position, which keeps the belt centered on the rollers during sanding and supports consistent contact across the platen.
The graphite covered steel platen runs cooler under the belt, which reduces heat at the sanding interface and supports longer belt life and more stable sanding pressure.
The quick release belt tension lever lets the belt slacken quickly, which speeds belt changes between grits and helps keep sanding sequences moving with less interruption.
The single 4 inch dust port at the back of the base serves both the belt and the disc, which channels dust collection through one hose connection during sanding.
The Jet JSG-6DC belt and disc sander has built-in handles, which aid in moving the machine around the workshop when rearranging workstations or clearing floor space.
The JT9-708599K Jet sander pairs a 6 x 48 inch belt with a 12 inch disc and a 1-1/2HP motor, which positions it as a single station for both heavy stock removal and controlled finish sanding. The dual thumbscrew belt tracking adjustment, graphite covered steel platen, and quick change elements are built around repeatable results, so sanding runs stay consistent from part to part. When a shop needs one industrial 1.5 HP belt disc sander that can shift between coarse and finer work without reconfiguring the floor, this configuration delivers that blend of power and flexibility.
