Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Jet JSG-6CS belt and disc sander combines a 12 inch disc with a 6 x 48 inch belt to deliver sanding on both broad faces and edges in one machine, which helps consolidate footprint and setup time in a woodworking shop. The sander provides raw industrial 1.5 HP sanding power, so it drives abrasive cuts through tough materials without stalling and stays productive on demanding operations. A one-piece formed steel heavy-duty closed stand supports the machine, giving it a solid base during sanding while also organizing the unit as a single freestanding tool. Built-in handles tie directly into this design, letting the operator shift the machine around the workshop as layouts change without separate lifting gear. The combination of belt and disc with this power level makes the tool suited to shops that want consistent sanding performance from one dedicated station.
The JET Tools belt disc sander 708598K uses a closed stand design, so once positioned, the stand supports the sanding head at a stable working height that suits repeated material handling. Built-in casters and integrated locking wheels allow the machine to roll into place and then stay anchored for sanding, simplifying layout changes in a busy shop. Exclusive dual thumbscrew belt tracking adjustment lets the operator dial in belt alignment, then lock it, keeping the belt running true across the platen during long sanding sessions. A quick-release belt tension lever speeds belt changes by relaxing tension for removal and then reapplying it for use, which supports fast grit swaps between rough and finish sanding. The quick-lock dust cover for the disc opens and closes rapidly, allowing disc access when needed while returning the guard to position around the disc for ongoing work.
The 6 x 48 inch belt gives a long, straight sanding path, so it suits flattening longer stock faces and edges where continuous contact with the belt helps drive consistent removal along the length. The graphite covered steel platen sits behind this belt, and because the graphite layer runs cooler, it supports extended sanding sessions while promoting longer belt life in operations that keep parts on the platen. The 12 inch disc gives a broad circular surface for squaring ends, shaping smaller components, or refining miters, and its size offers ample arc contact for controlled material removal. Raw industrial 1.5 HP sanding power drives both belt and disc, so the machine responds well when operators load the abrasive hard during dimensioning or cleanup work. The built-in handle and built-in handles mentioned in the description give users defined grab points, which simplifies repositioning the closed stand near other machines or benches as workflow changes.
The exclusive dual thumbscrew belt tracking adjustment provides two-point control of belt alignment; once set and locked, this keeps the belt running on track, so the sanding line stays predictable and parts see the same abrasive position pass after pass. The quick-release belt tension lever reduces the time between grits; this encourages appropriate belt changes instead of pushing a worn grit longer, which supports repeatable surface quality across batches. The quick-lock dust cover on the disc allows fast disc changes, shortening the window between disc grits or replacements and helping maintain consistent cutting speed on disc-based operations. The one-piece formed steel heavy-duty closed stand adds rigidity to the system, limiting movement during sanding that could affect accuracy along edges or on end grain. Integrated locking wheels allow the sander to be moved for cleaning or layout changes and then locked down again, keeping its position and stance consistent relative to other workstations. The graphite covered steel platen interacts with the belt to reduce heat, so belt wear is more uniform, which contributes to steady performance from the first part in a run to the last.
The 6 x 48 inch belt provides a long, straight sanding run, which supports flattening faces, dressing edges, and refining longer stock where continuous contact with the abrasive helps keep surfaces even.
The dual thumbscrew belt tracking adjustment locks the belt on track, so the sanding line stays consistent during operation and parts are presented to a stable abrasive path.
The graphite covered steel platen runs cooler, meaning friction and heat at the backing surface are reduced, which increases machine and belt life during repeated sanding cycles.
The one-piece closed stand with built-in casters and integrated locking wheels lets the sander roll between work areas, then lock down, supporting flexible but stable workstation placement.
The 1-1/2HP motor provides the power to easily handle tough sanding operations, so abrasive speed stays productive when operators apply firm pressure or work dense materials.
The quick-release belt tension lever and quick-lock dust cover speed belt and disc changes, reducing downtime between grits and helping keep surface quality consistent across different sanding stages.
The industrial belt and disc sander Jet JT9-708598K pairs a 6 x 48 inch belt with a 12 inch disc, giving one station the reach for long edges and the control for end work. The one-piece formed steel heavy-duty closed stand with built-in casters and integrated locking wheels brings stability while still allowing movement between cells. With raw industrial 1.5 HP sanding power, exclusive dual thumbscrew belt tracking adjustment, a graphite covered steel platen, and quick-change features on both belt and disc, the JSG-6CS is built to support steady sanding output. Put this machine into your sanding line when you want combined belt and disc capability in a single, stand-mounted unit.
