Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Jet Tools 708597K JSG-96CS sander combines a 6 x 48 inch belt and 9 inch disc so one machine handles both flattening and edge work, reducing tool changes in the shop. The powerful 3/4HP motor in single phase 115V drives both sanding surfaces, so typical woodworking stock can be handled on one footprint. A one-piece formed steel heavy-duty closed stand supports the machine, so the sanding surfaces stay stable during material removal. The closed stand also provides additional storage for abrasives, keeping belts and discs at hand near the tool. Built-in handles contribute to easier portability of the unit, so the sander can be repositioned around the workspace without dismantling. Integrated locking wheels support easy mobility, so the machine can roll into position and then stay put while sanding.
The large cast iron table has preset stops at 90 degrees and 45 degrees, so the belt sander can be used vertically, horizontally, or positioned anywhere in between for different sanding angles. These preset stops support repeatable setups when switching between square work and angled work. The one-piece formed steel heavy-duty closed stand provides additional support under the sander, so the belt and disc stay aligned while material is fed. Integrated locking wheels and built-in handles allow the machine to be moved to a workstation, then locked, so the working height and stance remain consistent from job to job.
The JSG-96CS sander combines a 6 x 48 inch belt and 9 inch disc, so edge-jointing style sanding, end-grain cleanup, and small part shaping can all be handled on one machine. The large cast iron table supports stock at the disc or belt, while preset 90 degree and 45 degree stops give clear reference points for square and mitered work. Being able to run the belt vertically, horizontally, or between allows cabinet parts, trim, and jigs to be presented at practical working angles without separate dedicated machines. A powerful 3/4HP motor in single phase 115V drives both sanding stations, so normal shop power can run the tool in a range of woodworking environments.
Exclusive dual thumbscrew belt tracking adjustment locks to keep the sanding belt on track during use, so the belt remains centered on the rubber-coated drive drum for consistent edge quality. The rubber-coated drive drum improves grip on the sanding belt, so the belt resists slipping when pressure is applied to the workpiece. A quick-release belt tension lever makes belt changes fast and easy, so grit changes can match each sanding step without long changeovers. The quick-lock dust cover allows fast disc changes, supporting staged disc grits to move from stock removal to refinement. A graphite covered steel platen runs cooler, which increases machine and belt life and keeps the sanding surface more stable during extended passes. The one-piece formed steel heavy-duty closed stand, combined with integrated locking wheels and built-in handles, supports a solid working stance while still allowing repositioning as shop layouts and tasks change.
The JSG-96CS sander provides a 6 x 48 inch belt and a 9 inch disc, letting one machine handle edge sanding, face sanding, and small part work on the same footprint.
The quick-release belt tension lever on the JSG-96CS makes belt changes fast and easy, reducing downtime when switching grits or replacing worn belts between sanding stages.
The JSG-96CS uses a 3/4HP motor in single phase 115V, so the sander provides solid power for typical woodworking tasks using common shop electrical service.
The exclusive dual thumbscrew belt tracking adjustment on the JSG-96CS locks to keep the belt on track, so the belt stays aligned on the drum during edge and face sanding.
The graphite covered steel platen on the JSG-96CS runs cooler, which increases machine and belt life and keeps the contact area more stable during longer sanding sessions.
The one-piece formed steel heavy-duty closed stand provides additional support and storage for abrasives, so the machine stays stable and sanding media stays close to the work area.
This closed stand belt and disc sander combines a 6 x 48 inch belt, 9 inch disc, and a 3/4HP single phase 115V motor, so one Jet Tools 708597K JSG-96CS sander can cover many sanding stages in the same workstation. With dual thumbscrew belt tracking adjustment, a quick-release belt tension lever, and a quick-lock dust cover, the machine supports fast abrasive changes while keeping the belt and disc running where they should. For shops that want a single, heavy-duty JSG-96CS belt and disc sander with adjustable table stops and integrated mobility, this model offers a focused solution ready for regular woodworking use.
