Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade DynaCut Extreme sanding disc uses P graded aluminum oxide abrasives, so each grain is tightly controlled, giving a fast, predictable cut that helps keep sanding cycles consistent across multiple parts. The disc uses aluminum oxide on a film backing, so it maintains a uniform scratch pattern that supports even finishing and reduces follow-up touch-up time. This 5 inch, 120 grit disc is a common choice for intermediate sanding, helping refine surfaces after heavier stock removal while still cutting efficiently. The no hole design presents a full abrasive surface, so more of the disc area is working at once where dust extraction through the disc is not required. The product is part of the Abrasive Discs category, so it fits typical workflows where technicians rely on hook-and-loop or PSA discs for orbital or random-orbital sanding tasks.
This 5 inch 120 grit PSA sanding disc uses a pressure sensitive adhesive layer, so it bonds directly to vinyl face back-up pads without separate clamping steps. The adhesive is designed to adhere firmly, so the disc stays flat on the pad as the sander moves across workpieces. The PSA also removes cleanly from the vinyl face when the disc is worn out, so the pad surface remains ready for the next disc without extra scraping time. The disc has a no hole construction, so it presents an uninterrupted abrasive face to the work, matching sanders and setups that do not rely on through-disc dust extraction. The film backing is extremely tough and tear resistant, so it stays intact on the pad during edge work and when sanding near profiles.
This aluminum oxide film sanding disc is built on a 3 mil film backing, so it stays dimensionally stable as it moves across flat panels or narrow edges, helping keep scratch patterns even from part to part. The premium P graded aluminum oxide abrasive on the disc delivers fast cut and long life, so it supports workflows where operators run multiple parts to the same finish level without frequent disc swaps. The no hole design suits sanding stations set up without through-disc extraction, where a solid abrasive face helps focus cutting directly at the contact area. As part of the Abrasive Discs class from Dynabrade, it aligns with random orbital and similar sanders that rely on PSA-backed discs for repeatable performance.
The high performance 3 mil film backing is extremely tough and tear resistant, so the disc keeps its edge when operators sand near corners or over sharp transitions, reducing premature failure. That same backing generates the finest finishes, so a 120 grit step can bridge efficiently between coarse leveling and finer finishing passes. The proprietary clog free coating on the disc is pigment free and creates a buildup resistant abrasive surface, so the cut stays open longer when working on materials that tend to load abrasives, which supports more consistent removal rates. Because the clog free coating further extends product life, sanding teams can move through more components before changing discs. The pressure sensitive adhesive bonding to vinyl face back-up pads holds the disc firmly, so the abrasive stays flat and responsive to sander motion. When discs are worn out, the PSA removes cleanly, so the next disc installs onto a smooth pad surface without residual lumps that could telegraph into the finish.
The Dynabrade DynaCut Extreme sanding disc uses premium P graded aluminum oxide abrasives, which provide fast cut and long life, supporting extended use on repeated sanding tasks.
The 3 mil film backing is extremely tough and tear resistant and generates the finest finishes, so it resists damage while delivering a smooth, consistent surface profile.
The proprietary clog free coating is pigment free and buildup resistant, so the abrasive surface stays open longer and further extends disc life in normal sanding use.
The pressure sensitive adhesive adheres the disc firmly to vinyl face back-up pads, providing secure tracking, and it removes cleanly when discs are worn out for quick changes.
This disc measures 5 inches in diameter and uses 120 grit, so it suits intermediate sanding steps where material removal and surface refinement must be balanced.
The no hole configuration provides a continuous abrasive surface, so it matches sanding setups that do not rely on through-disc dust extraction and favor full-face contact.
The Dynabrade 91529 aluminum oxide film disc combines premium P graded aluminum oxide with a 3 mil film backing, so it delivers fast cut, fine finishes, and strong tear resistance in day-to-day sanding. The proprietary clog free coating keeps the abrasive surface buildup resistant, so useful life extends over more parts. Its 5 inch, 120 grit, no hole format on a pressure sensitive adhesive backing works with vinyl face back-up pads, so installation and removal align smoothly with existing PSA-based sanding stations. For teams standardizing on Dynabrade abrasive discs, this DynaCut Extreme option supports consistent results across production or shop environments.
Sold In: 1 Package