Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade DynaCut Extreme sanding disc is a 5 inch, 100 grit, hook and loop, no hole aluminum oxide on film sanding disc designed for fast cut and long life. The premium P graded aluminum oxide abrasive delivers an aggressive, consistent cut, so stock removal stays predictable across the entire disc life. The extremely tough, tear resistant high performance 3 mil film backing supports the abrasive during demanding sanding, which helps reduce disc failure during extended use. This film backing also generates the finest finishes, allowing a single disc to move from leveling to finish-sanding on suitable surfaces. A proprietary clog free coating on the abrasive surface is pigment free and buildup resistant, so loading is reduced when sanding, extending useful life between disc changes. The hook and loop attachment system allows quick disc swaps and lets partially used discs be removed and reused later when they are not completely worn.
This 5 inch 100 grit sanding disc uses a hook and loop attachment system, so it mates directly to compatible hook faced backup pads for straightforward mounting. The no hole design provides a continuous abrasive surface, which keeps the entire face available for contact when dust extraction through the disc is not required. The 3 mil film backing supports uniform pressure transfer from the pad to the work, which helps maintain even scratch patterns across panels and edges. The premium P graded aluminum oxide abrasive maintains a controlled cut rate as pressure is applied, supporting predictable material removal on each pass. The proprietary clog free, pigment free coating resists buildup on the surface, so the disc stays cleaner under normal sanding conditions and requires fewer interruptions to restore cutting action.
This Dynabrade DynaCut Extreme sanding disc sits in the abrasives and abrasive discs category, aligning it directly with powered sanding workflows in woodworking and related trades. The 5 inch diameter matches common random orbit and similar sanders built around hook and loop backing pads, so the disc sits flat on the pad for consistent contact. The 100 grit rating positions it in a medium abrasive range, where it can handle leveling, shaping, and pre-finish sanding steps on suitable materials. The aluminum oxide on film construction is well suited to coated abrasives applications where a durable backing is needed to support extended cutting. In shops that use multiple grit steps, this disc can occupy an intermediate role, bridging coarse shaping and finer finishing sequences while keeping the same hook and loop interface.
The premium P graded aluminum oxide abrasive delivers fast cut and long life, which means each disc maintains a more uniform scratch pattern for longer before wearing down. This consistency reduces the chance of random deep scratches that can appear when an abrasive breaks down unevenly. The extremely tough, tear resistant high performance 3 mil film backing helps the disc resist edge damage and tearing under side loads, so operators can work closer to corners and profiles without frequent disc failures. Because the film backing also generates the finest finishes, it supports stepping down through grits more smoothly, limiting rework from visible swirl. The proprietary clog free coating is pigment free and provides a buildup resistant abrasive surface, so dust and debris are less likely to embed in the abrasive, allowing the disc to keep cutting cleanly. The hook and loop attachment system enables quick and easy disc changes, which supports frequent grit changes or rotation of partially worn discs across tools, helping maintain continuous productivity without lengthy changeover time.
This Dynabrade DynaCut Extreme sanding disc uses premium P graded aluminum oxide abrasive, which provides fast cut and long life during sanding operations.
The 3 mil film backing is extremely tough and tear resistant, so it supports heavy use while generating the finest finishes on suitable surfaces.
This sanding disc uses a hook and loop attachment system, allowing quick disc changes and letting discs be removed and saved when not completely worn.
The proprietary clog free coating is pigment free and buildup resistant, so the abrasive surface stays cleaner and cutting performance is extended.
This Dynabrade DynaCut Extreme disc is 5 inches in diameter and 100 grit, positioning it for medium sanding and pre-finish work.
The no hole design means the 5 inch sanding disc has a continuous abrasive face, keeping the full surface available for contact during sanding.
This aluminum oxide on film sanding disc combines a 5 inch, 100 grit, no hole design with hook and loop attachment to support standard sanding tools. The premium P graded aluminum oxide abrasive and 3 mil film backing provide fast cut, fine finishes, and long disc life in coated abrasive workflows. The proprietary clog free, pigment free coating keeps the abrasive surface buildup resistant, extending productive use between disc changes. The hook and loop system allows quick swaps and reuse of discs that are not fully worn, supporting efficient use of every abrasive. For demanding sanding tasks that need predictable cut and finish from an abrasive disc, this Dynabrade DynaCut Extreme sanding disc aligns with professional and serious DIY requirements.
Sold In: 1 Package