Dynabrade DynaCut Extreme sanding disc is a 5 inch, 1,000 grit hook and loop aluminum oxide disc on film designed for fine sanding tasks where control and surface quality matter. The premium P graded aluminum oxide abrasive is manufactured for fast cut and long life, so each disc removes material efficiently while staying in service longer, which supports steady production work. The extremely tough and tear resistant high performance 3 mil film backing generates the finest finishes, helping deliver smooth, consistent surfaces on demanding jobs. That same 3 mil film backing also provides up to 4X the life of paper discs, reducing disc changes and downtime over a run of parts. The proprietary clog free coating is pigment free and provides a buildup resistant abrasive surface, which keeps the disc cutting instead of loading, especially during extended sanding passes. This disc has no hole pattern and uses a hook and loop attachment system, so mounting and removal are quick and easy during tool changes.
This 5 inch 1,000 grit hook and loop sanding disc uses a hook and loop attachment system, so it mounts to compatible hook backing pads by pressing the disc into place, allowing rapid disc swaps during step-sanding sequences. The aluminum oxide abrasive is manufactured for fast cut and long life, so it responds predictably as pressure and passes are adjusted during fine finishing. The high performance 3 mil film backing is extremely tough and tear resistant, which supports edge use and curved surface contact without the backing breaking down prematurely. Because the backing generates the finest finishes and offers up to 4X the life of paper discs, it supports extended fine sanding runs before a disc change is needed. The proprietary clog free coating is pigment free and provides a buildup resistant surface, so abrasive performance remains closer to initial cut rate over more passes on the same area.
This Dynabrade DynaCut Extreme 5 inch 1,000 grit hook and loop no hole aluminum oxide on film sanding disc is part of the abrasive discs category, so it is suited to sanding and finishing roles in woodworking and related shop work. The premium P graded aluminum oxide abrasive is manufactured for fast cut and long life, making the disc effective where a fine 1,000 grit is needed to refine surfaces after coarser sanding steps. Because the high performance 3 mil film backing is extremely tough and tear resistant, it handles contact across flat areas and transitions without easily tearing, which supports consistent finishing on multiple parts in sequence. The film backing generates the finest finishes, which aligns this disc with tasks where a smooth, even finish is important before subsequent operations. The no hole design provides a continuous abrasive face across the 5 inch disc, which supports full contact sanding patterns on appropriate backing pads.
The high performance 3 mil film backing provides up to 4X the life of paper discs, so the disc remains in service longer under normal sanding conditions and reduces the number of disc changes required during a job. That extended life helps keep sanding progress more continuous when moving across multiple panels or components. The backing also generates the finest finishes, supporting a smoother surface profile that can improve the appearance and uniformity of the final sanded area. The proprietary clog free coating is pigment free and provides a buildup resistant abrasive surface, which limits debris accumulation between abrasive grains and keeps the disc cutting cleanly during repeated passes. Because the coating is pigment free, it avoids adding color from the disc surface itself, which supports clean, predictable sanding where surface appearance matters. The hook and loop attachment system makes disc changes quick and easy, and discs can be saved for future use when not completely worn, so partially used discs can be reused on later tasks to match specific 1,000 grit steps without wasting remaining abrasive life.
This disc uses coated abrasives manufactured with premium P graded aluminum oxide, which delivers fast cut and long life during sanding, supporting efficient fine finishing work.
The extremely tough, tear resistant 3 mil film backing generates the finest finishes and provides up to 4X the life of paper discs, extending service life and supporting smoother surfaces.
This is a hook and loop sanding disc, so the attachment system allows quick and easy disc changes during sanding sequences while maintaining secure contact on the backing pad.
The proprietary clog free coating is pigment free and provides a buildup resistant abrasive surface, which limits loading so the disc keeps cutting effectively over more passes.
The disc is 5 inches in diameter and 1,000 grit, pairing a fine abrasive grade with a common disc size for detailed finishing steps.
The manufacturer part number is 91617, which identifies this specific Dynabrade DynaCut Extreme 5 inch 1,000 grit hook and loop no hole aluminum oxide on film sanding disc.
This Dynabrade DynaCut Extreme 5 inch 1,000 grit hook and loop no hole aluminum oxide on film sanding disc combines premium P graded aluminum oxide with a high performance 3 mil film backing, delivering fast cut, the finest finishes, and up to 4X the life of paper discs. The proprietary pigment free clog free coating provides a buildup resistant surface, so the abrasive stays effective across extended passes. The hook and loop attachment system makes disc changes quick and easy and supports saving discs for future use when not completely worn. For fine sanding steps that demand consistent results and reduced changeover time, this disc offers a film-backed, 1,000 grit option ready for ongoing shop work.
Sold In: 1 Package