Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade DynaCut Extreme 5 inch sanding disc is a 320 grit hook and loop no hole aluminum oxide on film sanding disc that is built for fast cut and long life, which helps crews remove material efficiently while keeping discs in service longer. The disc uses premium P graded aluminum oxide abrasives, so the grain size is tightly controlled and delivers consistent cutting action, which supports predictable surface preparation from disc to disc. The abrasive is coated on a high performance 3 mil film backing that is extremely tough and tear resistant, so the disc stays intact under pressure, helping avoid downtime from torn paper. This film backing also generates the finest finishes in use, which is useful when stepping into pre-finish sanding stages. The no hole design pairs with the hook and loop attachment system for a full face sanding surface, so operators get even contact and straightforward mounting on compatible hook and loop pads.
This Dynabrade DynaCut Extreme 5 inch 320 grit disc uses a hook and loop attachment system, so it mounts directly to compatible hook and loop backing pads, which speeds up the changeover process between grit steps. The no hole design keeps the abrasive surface uninterrupted across the full 5 inch face, which provides even contact and predictable cutting when working flat panels or edges. The premium P graded aluminum oxide grain combined with the high performance 3 mil film backing gives the disc stability during use, so it holds its shape against the pad for consistent scratch patterns. The proprietary clog free coating is pigment free and provides a buildup resistant surface, so the disc keeps cutting cleanly over longer passes on dust-generating substrates, which supports longer working cycles between disc swaps. The ability to remove and later reuse discs that are not completely worn lets shops stage specific discs for matching touch-up or intermediate sanding steps.
This Dynabrade DynaCut Extreme 5 inch 320 grit hook and loop no hole aluminum oxide on film sanding disc is built around premium P graded aluminum oxide abrasives, so the fine 320 grit cut remains consistent across the disc and from disc to disc, which is especially helpful when dialing in uniform surface preparation. The extremely tough and tear resistant high performance 3 mil film backing supports this fine abrasive with a stable base, so the disc stays flat and resists edge tear-out when sanding near profiles or corners, maintaining a controlled scratch pattern. Because the 3 mil film backing generates the finest finishes, this disc serves well for final sanding passes prior to finishing, reducing the amount of additional smoothing needed. The no hole face presents continuous abrasive to the work, so every part of the 5 inch surface contributes to the finishing step, which supports even appearance across wide cabinet panels, trim parts, or similar flat stock.
The discâs proprietary clog free coating is pigment free and provides a buildup resistant abrasive surface, so dust and fines are less likely to embed in the grain, which keeps the 320 grit cutting rather than burnishing. That extended cutting action directly supports up to 4X the life of paper discs, so operators can stay on a single disc for more parts before changing, reducing interruptions in production runs. The high performance 3 mil film backing is extremely tough and tear resistant, so it withstands aggressive use that would quickly damage standard paper, which helps protect against sudden failure during critical finish passes. When combined with the hook and loop attachment system, this durability lets users remove a disc partway through its life and reinstall it later for matching follow-up work, aligning abrasive wear to specific tasks. The result is a sanding disc that supports longer, more predictable service intervals on compatible tools.
The Dynabrade DynaCut Extreme disc uses premium P graded aluminum oxide abrasives, which provides a consistent grain size for predictable cutting and fine surface preparation in sanding operations.
The high performance 3 mil film backing is extremely tough and tear resistant, so the disc stays intact under pressure and generates the finest finishes during sanding passes on flat or profiled work.
The proprietary clog free coating is pigment free and buildup resistant, so the abrasive surface loads less with dust, allowing the 320 grit to keep cutting effectively over longer use.
This DynaCut Extreme disc offers up to 4X the life of paper discs, so sanding operations can run longer between disc changes, improving workflow on repeated parts or larger surfaces.
The sanding disc uses a hook and loop attachment system, so it mounts quickly to compatible pads and can be removed just as easily when changing grits or rotating discs.
The hook and loop system allows discs that are not completely worn to be saved for future use, so specific discs can be reused for similar finishing stages when needed.
The Dynabrade DynaCut Extreme 5 inch 320 grit hook and loop no hole aluminum oxide on film sanding disc combines premium P graded aluminum oxide, a high performance 3 mil film backing, and a proprietary clog free coating that is pigment free and buildup resistant, so it supports fast cut, the finest finishes, and extended service life on compatible hook and loop tools. The hook and loop attachment system also allows quick disc changes and reuse of partially worn discs, which fits production sanding environments that depend on consistent finish and predictable abrasive life. For operations that value long running abrasive discs with fine finishing capability, this Dynabrade DynaCut Extreme film disc offers a focused solution using its verified construction and coating features.
Sold In: 1 Package