Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade DynaCut Extreme 5 inch sanding disc is a 180 grit abrasive disc designed for fast cut and a fine finish on sanding jobs. The disc uses premium P graded aluminum oxide abrasives, so each stroke removes material efficiently while still leaving a controlled scratch pattern that supports refined surface preparation. A no hole design presents a continuous abrasive surface, keeping contact consistent across the full 5 inch face during use. The disc is built on a high performance 3 mil film backing, which stays extremely tough and tear resistant as it flexes, helping the disc stay intact around edges and contours. This film backing also supports generating the finest finishes, so sanding steps can progress smoothly toward coating or assembly. As part of Dynabrade DynaCut Extreme coated abrasives, the disc is configured for repeatable performance in demanding abrasive work.
The 180 grit hook and loop sanding disc uses a hook and loop attachment system, so mounting to a compatible backup pad is a press-on, peel-off step during setup. This connection style lets the disc seat flat quickly, helping the abrasive face track evenly over the work surface. When a different grit or a fresh disc is needed, the hook and loop backing releases without tools, keeping downtime between steps low. The no hole, 5 inch format presents a uniform disc edge for pad contact, so operators can work close to edges or profiles with predictable support from the backing pad. Because discs can be removed before they are completely worn and later returned to service, it becomes practical to keep specific grits available for follow-up passes on the same job.
This no hole aluminum oxide sanding disc is built as a 5 inch coated abrasive disc, so it fits sanding setups that use 5 inch hook and loop style backup pads. The 180 grit rating positions the disc in a medium-fine range, so it can be used after coarser stock removal steps to refine scratches while still leveling minor imperfections. The high performance 3 mil film backing provides a stable, smooth base under the abrasive layer, which supports close control when sanding surfaces that need a fine, even finish. Because the film backing is extremely tough and tear resistant, it performs well on edges and corners where paper-backed discs can be more prone to damage. The pigment free, clog free coating keeps the abrasive surface buildup resistant, which is valuable when sanding materials that tend to load a disc and reduce cut rate.
The P graded aluminum oxide abrasives are selected for fast cut and long life, so each disc can stay on the tool longer while still producing efficient material removal and controlled surface refinement. This helps reduce the number of discs used over a run of parts. The proprietary clog free coating keeps the abrasive face buildup resistant, so the disc stays open longer and maintains a more consistent cutting action across the job. The hook and loop attachment system allows quick, tool-free disc changes, which supports workflows that step through multiple grits without extended changeover time. Being able to remove a 180 grit disc that is not completely worn and save it for future use lets installers and shops match partially used discs to similar tasks later, stretching abrasive spend. Together, the film backing, clog resistant coating, and aluminum oxide grain construction support generating the finest finishes while delivering a service life that fits demanding sanding operations.
The Dynabrade DynaCut Extreme disc uses premium P graded aluminum oxide abrasives, which provide fast cut with controlled scratch patterns for surface preparation.
The high performance 3 mil film backing is extremely tough and tear resistant, so the disc holds up around edges and maintains backing support while generating fine finishes.
The proprietary clog free coating is pigment free and buildup resistant, so abrasive loading is reduced and cutting action stays more consistent over longer sanding runs.
The hook and loop attachment system allows quick, tool-free disc changes, so switching grits or replacing a disc fits smoothly into the sanding workflow.
The hook and loop backing lets discs be removed when not completely worn and saved for future use, so partially used discs can be matched to later sanding tasks.
The 180 grit rating positions this disc for medium-fine sanding, so it follows coarser grits to refine scratches while still leveling minor surface imperfections.
The Dynabrade abrasive disc 91549 combines premium P graded aluminum oxide, a high performance 3 mil film backing, and a pigment free, clog free coating, so sanding delivers both fast cut and refined finishes. The 180 grit, no hole, 5 inch format aligns with medium-fine work where consistent surface quality matters. With a hook and loop attachment system that supports quick disc changes and reuse of partially worn discs, this DynaCut Extreme option fits sanding setups focused on efficient workflows and extended disc life. Choose this no hole aluminum oxide sanding disc when a film backed, hook and loop 5 inch disc is the right match for controlled surface preparation.
Sold In: 1 Package