Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade DynaCut Extreme sanding disc uses premium P graded aluminum oxide abrasives, which deliver fast cut rates so stock removal stays efficient on repetitive sanding tasks. The disc is built on an extremely tough 3 mil high performance film backing, which resists tearing in use so operators can sand aggressively without disc failure. This film construction generates the finest finishes, which helps reduce follow-up polishing steps on finished parts. The abrasive surface uses a proprietary clog free coating that is pigment free, which provides a buildup resistant surface so the disc continues to cut instead of loading. The 6 inch diameter no hole layout keeps the sanding face solid, which supports consistent contact with the work surface. A pressure sensitive adhesive on the back adheres firmly to vinyl face back-up pads, which keeps the disc stable during operation. The adhesive also removes cleanly when worn, which simplifies disc changeover.
The pressure sensitive adhesive backing on this 6 inch no hole sanding disc adheres directly to vinyl face back-up pads, which creates a stable interface between the abrasive and the sander. This firm bond helps transmit tool motion evenly across the disc surface during operation. When the abrasive surface is worn, the PSA backing removes cleanly from the vinyl pad, which keeps residue from interfering with the next disc. The no hole configuration suits back-up pads designed for solid-face contact, which simplifies disc alignment on the pad. With its 220 grit rating, the disc serves as a fine step in a sanding sequence on appropriate surfaces where smoothness is the goal.
This 6 inch 220 grit PSA sanding disc fits workflows that call for a fine abrasive step using a no hole pattern on vinyl face back-up pads. The premium P graded aluminum oxide abrasive is manufactured for fast cut and long life, which supports sanding stages where material must be refined without constant disc changes. Because the high performance 3 mil film backing is extremely tough and tear resistant, the disc keeps its shape under tool pressure, which helps maintain consistent contact on broad surfaces. That same film backing generates the finest finishes, which positions this disc well in sequences where a smooth, uniform surface finish is important before further finishing work. The proprietary clog free coating is pigment free and provides a buildup resistant abrasive surface, which keeps the cutting action open in applications where dust tends to collect on standard abrasives.
The aluminum oxide abrasive in this Dynabrade DynaCut Extreme sanding disc is premium P graded, which means the grit size is tightly controlled so the 220 grit surface cuts predictably across the full disc. This consistent grit distribution helps achieve uniform scratch patterns that sand out smoothly in later steps. The extremely tough 3 mil film backing resists tears far better than paper discs and delivers up to 4X the life of paper, which reduces the number of disc changes over a job and helps keep sanding results repeatable from part to part. The proprietary clog free coating creates a buildup resistant abrasive surface, which limits loading so the disc continues to cut at a steady rate instead of glazing. Because the coating is pigment free, it avoids adding color from the disc itself onto work surfaces, which supports clean, controlled finishing. The pressure sensitive adhesive that adheres firmly to vinyl face back-up pads keeps the disc flat and secure, which promotes even sanding pressure and helps minimize rework caused by uneven contact.
The Dynabrade DynaCut Extreme sanding disc uses premium P graded aluminum oxide abrasives, which provide fast cut and long life during sanding operations.
The extremely tough 3 mil high performance film backing resists tearing and generates the finest finishes, which extends disc life and supports consistent surface quality.
The proprietary clog free coating is pigment free and buildup resistant, which helps the disc resist loading so it maintains effective cutting over longer sanding runs.
The pressure sensitive adhesive adheres the disc firmly to vinyl face back-up pads and removes cleanly when worn, which keeps mounting secure while simplifying disc changes.
The 220 grit rating defines a fine sanding disc, which is suited to refining surfaces toward a smooth finish as part of a multi-step abrasive sequence.
This extremely tough 3 mil film backed disc delivers up to 4X the life of paper discs, which reduces disc usage and helps maintain consistent sanding performance.
The Dynabrade DynaCut Extreme sanding disc combines a premium P graded aluminum oxide abrasive with an extremely tough 3 mil film backing, which delivers fast cut, up to 4X the life of paper discs, and fine finishing from a 220 grit surface. The proprietary clog free, pigment free coating provides a buildup resistant abrasive surface, which sustains cutting performance across extended sanding runs. With its 6 inch no hole format and pressure sensitive adhesive that adheres securely to vinyl face back-up pads yet removes cleanly, this disc suits workflows that demand stable mounting and predictable finishing results.
Sold In: 1 Package