Dynabrade DynaCut Extreme 6 inch sanding disc is a PSA, no hole, aluminum oxide sanding disc on a film backing designed for fast cut and long life. The 800 grit abrasive delivers a very fine finish, which helps dial in final surface quality before coatings or between coats. Coated abrasives manufactured with premium P graded aluminum oxide abrasives cut quickly while maintaining a consistent scratch pattern, which supports predictable finishing results across multiple workpieces. The extremely tough and tear resistant high performance 3 mil film backing generates the finest finishes and up to 4X the life of paper discs, reducing disc changes during longer sanding sessions. The proprietary clog free coating is pigment free and provides a buildup resistant abrasive surface, which helps maintain cutting efficiency in dustier sanding conditions. Pressure sensitive adhesive adheres disc firmly to vinyl face back-up pads and removes cleanly when discs are worn out, supporting quick disc changes and clean pad surfaces.
This 6 inch no hole PSA sanding disc uses a pressure sensitive adhesive backing that bonds to vinyl face back-up pads, which provides a flat, secure interface for random orbital sanding. The 3 mil film backing is extremely tough and tear resistant, so it stays stable under pad pressure and along edges, which supports controlled sanding without edge fraying. The 800 grit, premium P graded aluminum oxide abrasive is suited to very fine sanding, which fits finishing passes where a refined surface is needed. The proprietary clog free coating provides a buildup resistant abrasive surface, which helps maintain cutting action as dust develops during sanding. The film backing generates the finest finishes and up to 4X the life of paper discs, which supports extended runs between disc changes in production-style workflows.
This abrasive disc is categorized as an abrasive disc and fits abrasive discs use on compatible 6 inch vinyl face back-up pads, which aligns with many random orbital sanding setups in woodworking and similar shops. The 6 inch diameter gives a broad sanding area, which helps cover panels and wider parts efficiently when leveled over a vinyl face pad. As a no hole PSA disc, it relies on its pressure sensitive adhesive to bond to the pad surface, which creates full-face contact for even sanding across the disc. The coated abrasives are manufactured with premium P graded aluminum oxide abrasives, which supports repeatable cutting behavior from disc to disc when running through a standard grit sequence. The extremely tough and tear resistant high performance 3 mil film backing helps the disc stay intact when working near edges, profiles, or seams, which is important when refining details without replacing discs prematurely.
The DynaCut Extreme construction uses a high performance 3 mil film backing that generates the finest finishes and up to 4X the life of paper discs, which helps control finish quality while trimming abrasive costs in higher volume work. The proprietary clog free coating is pigment free and provides a buildup resistant abrasive surface, which helps keep the scratch pattern consistent even as fine dust accumulates, an advantage during extended fine sanding passes. The 800 grit rating delivers a very fine cut, which supports tasks where surface smoothness directly affects coating appearance or touch. Pressure sensitive adhesive adheres disc firmly to vinyl face back-up pads and removes cleanly when discs are worn out, which keeps pads ready for the next disc without scraping adhesive or interrupting workflow. Manufactured with Dynabrade DynaCut Extreme design and P graded aluminum oxide, the disc balances fast cut and long life, which supports both stock removal and refined finishing stages with fewer disc swaps.
This disc uses premium P graded aluminum oxide abrasives, which provide fast cut and long life so sanding stays efficient across more parts per disc.
The high performance 3 mil film backing is extremely tough and tear resistant, which supports finer finishes and up to 4X the life of paper discs in typical use.
This sanding disc uses a pressure sensitive adhesive backing that adheres firmly to vinyl face back-up pads and removes cleanly when discs are worn out.
The disc is described as no hole because its 6 inch PSA design has no vacuum holes, which creates full-face contact on compatible vinyl face back-up pads.
The 800 grit aluminum oxide on film generates very fine finishes, which suits final smoothing and refinement where surface quality is a priority.
The proprietary clog free coating is pigment free and buildup resistant, which helps the abrasive surface stay clearer and maintain cutting performance longer.
The Dynabrade DynaCut Extreme 6 inch 800 Grit PSA No Hole Aluminum Oxide on Film Sanding Disc, part number 91585, offers premium P graded aluminum oxide with a high performance 3 mil film backing for fast cut, very fine finishes, and extended disc life. The proprietary clog free, pigment free coating supports a buildup resistant abrasive surface, while the PSA backing adheres securely to vinyl face back-up pads and removes cleanly when discs are worn out. For workflows that depend on consistent fine finishing and reduced changeover time, this 6 inch no hole PSA disc is well suited to abrasive discs applications on compatible sanding setups.
Sold In: 1 Package