Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade DynaCut Extreme sanding disc is a 6 inch, 1,000 grit abrasive disc designed for very fine sanding where finish quality matters. The disc uses premium P graded aluminum oxide abrasive, which delivers fast cut while still refining the surface, so technicians can move efficiently through fine grit steps. The abrasive is bonded to an aluminum oxide on film construction, which supports consistent cutting action across the full disc. The no hole face keeps the sanding surface uninterrupted, which helps maintain even contact on flat work when dust extraction through the disc is not required. A pressure sensitive adhesive backing bonds the disc to vinyl face back-up pads, so changing discs becomes a quick press-on, peel-off step in the workflow. This combination of fine grit, film backing, and PSA attachment makes the disc suited to finishing passes where uniform, high-end surface preparation is required.
The pressure sensitive adhesive backing is formulated to adhere to vinyl face back-up pads, so installers press the 6 inch disc onto the pad and it bonds across the full face. This full-face adhesion keeps the disc flat on the pad, which helps the 1,000 grit surface track cleanly over the workpiece. When the abrasive is worn, the PSA layer removes cleanly from the vinyl pad, so the next disc seats on a clean surface without scraping residue. The no hole design creates a continuous abrasive face, so there are no perforations interrupting contact. This solid surface supports even pressure distribution across the disc diameter, which is important when chasing uniform fine finishes across panels or parts where consistent appearance is required.
This 6 inch, 1,000 grit Dynabrade DynaCut Extreme disc fits workflows that demand very fine sanding on wood, coatings, or other surfaces where scratch refinement is critical. The aluminum oxide on film construction keeps the abrasive stable, so the disc tracks well on flat panels when used with a vinyl face back-up pad. Because the disc face has no holes, it provides continuous abrasive contact across the full 6 inch diameter, which helps when leveling minor surface irregularities with light pressure. The premium P graded aluminum oxide abrasive maintains a consistent scratch pattern at this fine grit, supporting predictable results as users move from coarser steps into final surface preparation. The PSA back bonds the disc firmly to the pad, which is valuable when working over edges or contours where disc slippage would affect finish quality.
The extremely tough, tear resistant high performance 3 mil film backing supports the abrasive during use, so the disc is less likely to tear at the edge when sanding near corners or transitions. This durability translates into extended usable area from each disc, contributing to the up to 4X life compared to paper discs. The film backing also helps generate the finest finishes by keeping the disc flat and stable, which supports a uniform 1,000 grit scratch pattern that is easier to blend. The proprietary clog free coating is pigment free and creates a buildup resistant abrasive surface, so swarf and debris are less likely to load the disc face. A cleaner cutting surface lets the aluminum oxide abrasive maintain its fast cut and fine scratch for longer periods, which reduces how often discs need to be replaced during extended sanding sequences. Because the coating is pigment free, it does this without adding color to the work surface.
The Dynabrade 91586 disc uses premium P graded aluminum oxide on film, which provides fast cutting action at 1,000 grit and supports a consistent, fine scratch pattern on the work surface.
The 3 mil film backing is extremely tough and tear resistant, so it keeps the disc stable at the edge, generates the finest finishes, and delivers up to 4X the life of comparable paper discs.
The proprietary clog free coating is pigment free and buildup resistant, so it helps keep the abrasive surface open, maintaining cutting performance and extending disc life during fine sanding.
The pressure sensitive adhesive backing adheres firmly to vinyl face back-up pads, so the disc sits flat in use and then removes cleanly when worn, allowing straightforward disc changes between sanding steps.
The no hole design provides a continuous abrasive face across the 6 inch disc, giving even contact and pressure distribution where through-disc dust extraction is not required for the sanding operation.
This 1,000 grit disc, combined with P graded aluminum oxide and film backing, produces very fine finishes, so it is suited to final surface refinement before subsequent finishing or polishing stages.
The Dynabrade DynaCut Extreme 6 inch 1,000 grit PSA no hole aluminum oxide on film sanding disc brings together premium P graded aluminum oxide, a tough 3 mil film backing, and a proprietary clog free coating to support extended fine sanding. The disc adheres with pressure sensitive adhesive to vinyl face back-up pads and removes cleanly when worn, keeping setup and changeover direct. For operations that value fast cutting at very fine grit with up to 4X the life of paper discs, this Dynabrade 91586 disc offers a film-backed option tailored to consistent, high-end surface preparation.
Sold In: 1 Package