Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade DynaCut Extreme 6 inch sanding disc is a 1,200 grit PSA no hole aluminum oxide disc on a film backing that delivers very fine sanding where controlled material removal and refined finishes matter. The premium P graded aluminum oxide abrasive cuts fast while maintaining a consistent scratch pattern, so finish sanding steps stay predictable across a batch of parts. The 6 inch diameter pairs with common vinyl face back-up pads, giving coverage for larger panels while still handling edges and profiles. The 1,200 grit level works in the final stages of surface prep, where a uniform surface is critical before moving to subsequent finishing steps. The no hole design presents a full abrasive face to the work, which supports continuous contact on every pass where vacuum extraction is not required.
This 6 inch 1,200 grit PSA sanding disc uses a pressure sensitive adhesive backing that bonds directly to vinyl face back-up pads, creating a flat, stable sanding surface without mechanical clamping steps. The PSA layer is formulated so the disc adheres firmly while in use, helping it resist movement or lift at the edges under typical sanding loads. When the abrasive is worn out, the adhesive allows the disc to remove cleanly from the pad, which helps keep pad faces free of residue between disc changes. The no hole configuration presents an uninterrupted abrasive surface to the workpiece, which supports even contact when sanding without through-pad dust extraction. This construction supports repeatable mounting and removal in regular shop sanding workflows.
This Dynabrade aluminum oxide film sanding disc sits in the fine finishing range with its 1,200 grit rating, so it serves in later sanding stages where the goal is to refine prior scratch patterns. The P graded aluminum oxide abrasive delivers a controlled, predictable cut, which helps maintain an even surface as you step through grit sequences. Because the film backing is extremely tough and tear resistant, the disc tolerates contact at edges and around contours better than more fragile backings, which supports consistent results across varied part geometries. The 3 mil film backing is designed to generate the finest finishes, so each pass works toward a smoother surface that supports even appearance in subsequent finishing processes. The no hole layout gives a continuous abrasive face, useful when sanding where vacuum holes are not needed and full-face contact supports even pressure over the pad.
The high performance 3 mil film backing is engineered for strength, so it resists tearing that can prematurely end disc life during everyday sanding contact. That durability lets the abrasive layer stay active longer, which translates into more usable sanding time from each disc. The proprietary clog free coating is pigment free and designed to create a buildup resistant abrasive surface, so swarf and dust do not accumulate as quickly on the disc face during sanding. With reduced loading, the P graded aluminum oxide grains stay exposed to the work for longer periods, helping the disc maintain its fast cut over more parts. This coating also supports more consistent surface finish because the abrasive continues to cut instead of riding on packed debris. Together, the film backing and clog free coating work to deliver up to 4X the life of paper discs, which can support longer uninterrupted sanding runs in production or shop environments.
This Dynabrade DynaCut Extreme disc uses premium P graded aluminum oxide abrasive, which provides fast cut and a consistent scratch pattern for fine sanding stages.
The extremely tough 3 mil film backing is tear resistant and generates the finest finishes, so the disc stays intact longer and helps produce smooth, refined surfaces.
The proprietary clog free, pigment free coating creates a buildup resistant abrasive surface, helping reduce loading and extending disc life during normal sanding work.
The pressure sensitive adhesive backing adheres firmly to vinyl face back-up pads and removes cleanly when worn, supporting quick disc changes and consistent pad condition.
Dynabrade 91587 designates a 6 inch diameter, 1,200 grit PSA no hole aluminum oxide disc on film, suited to fine-stage sanding work on compatible pads.
This high performance 3 mil film backed disc is specified to generate the finest finishes and deliver up to 4X the life of paper discs in comparable sanding applications.
The Dynabrade DynaCut Extreme 6 inch 1,200 grit PSA no hole aluminum oxide disc on 3 mil film delivers fine finishing with fast cut, long life, and controlled scratch pattern. The pigment free clog free coating and pressure sensitive adhesive backing support extended use and straightforward disc changes on vinyl face back-up pads. For sanding setups that rely on 6 inch PSA film discs in later finishing stages, this Dynabrade 91587 disc provides a defined abrasive construction tailored to consistent surface preparation.
Sold In: 1 Package