Dynabrade DynaCut Extreme sanding disc is a 6 inch, 80 grit hook and loop abrasive disc that levels and smooths surfaces while holding securely to compatible backup pads, which supports controlled sanding passes on woodworking and similar finishing jobs. The disc uses aluminum oxide grain on a film backing, so it cuts material while maintaining a consistent finish across the work area, helping reduce visible scratch-pattern variation during prep work. The 25-hole design provides vacuum paths through the disc, so dust is removed from the sanding area, which helps keep the abrasive cutting instead of riding on debris. The disc uses modified open-coat aluminum oxide grain, so the abrasive spacing sheds dust more easily, which supports steady cutting rather than glazing over. A sacrificial stearate coating sits over the grain, sacrificing itself as it loads, so the disc resists clogging during extended sanding sessions.
This 6 inch 80 grit sanding disc uses a hook and loop attachment, so it mates to compatible hook-style backup pads and can be removed and repositioned without adhesive scraping, which helps speed grit changes during staged sanding. The aluminum oxide grain on film construction provides a stable cutting surface at 80 grit, so it is suited to material removal and surface preparation while still leaving a controlled scratch profile ready for subsequent steps. The 25-hole layout is designed for vacuum use, so when aligned to a matching pad pattern it channels dust away from the cut, which supports visibility at the workpiece and helps the abrasive cut rather than burnish. The tear resistant film backing keeps the disc intact under normal sanding stresses, which helps reduce premature edge tearing as operators feather into edges or contours.
This Dynabrade 91563 abrasive disc sits in the abrasive discs category and is built as a 6 inch aluminum oxide on film disc, so it fits workflows that rely on hook and loop random-orbit style sanding where quick disc swaps matter. At 80 grit, the disc targets stock leveling and aggressive surface prep, which suits tasks such as flattening seams, cleaning surfaces prior to finer grits, or knocking down high spots before moving to higher grits. The modified open-coat aluminum oxide grain and sacrificial stearate coating are tuned to minimize loading, so they are useful when sanding materials that generate fine dust that can clog tighter-coated abrasives. The film backing and tear resistant design support work on flat and modestly contoured surfaces, which helps keep the abrasive face stable while operators traverse joints, edges, and panel fields.
The aluminum oxide film sanding disc construction places abrasive on a uniform film layer, so cut depth and scratch pattern stay more consistent across the pad, which helps create predictable surfaces for later coating or finishing steps. The tear resistant backing resists splitting when the disc runs over edges or transitions, so operators can work up to corners without frequent disc failures. The modified open-coat design creates space between grains, so dust has room to evacuate from the cutting zone, which supports cooler, more efficient cutting instead of glazing. The sacrificial stearate coating acts as a temporary barrier that sheds as it loads with fines, so the underlying grain remains available for cutting over a longer working period. Combined with the 25-hole vacuum pattern, these features help keep the disc cutting consistently over more of its life, which supports steady workflow with fewer disc changes. The hook and loop attachment further supports repetition by enabling fast removal and application of discs, so moving between 80 grit and other grits can follow the same pad without downtime spent scraping adhesive.
This Dynabrade DynaCut Extreme sanding disc uses modified open-coat aluminum oxide grain, which provides cutting action while helping reduce loading during sanding work.
The sacrificial stearate coating sits over the aluminum oxide grain and breaks down as it loads, which helps minimize clogging so the disc continues to cut effectively over a longer period.
The disc uses a film backing under the aluminum oxide grain, which provides a stable, tear resistant base that supports consistent finish sanding across the work surface.
The 25-hole pattern allows dust to move through the disc to a vacuum source, which helps keep the sanding surface clearer for better cutting and visibility at the workpiece.
The 80 grit rating defines this disc as suitable for stock removal and surface prep, which helps establish an even scratch profile before progressing to finer finishing grits.
The tear resistant backing helps the disc withstand normal edge contact and sanding stress, which extends usable disc life and reduces interruptions from premature tearing.
This aluminum oxide film sanding disc from Dynabrade combines modified open-coat grain, sacrificial stearate coating, and a tear resistant film backing, so it delivers consistent cutting with reduced loading in demanding prep work. The 6 inch 80 grit hook and loop design with a 25-hole vacuum pattern supports efficient dust extraction while keeping disc changes fast, which helps maintain a steady workflow across larger sanding jobs. For shops that rely on predictable finish quality and disc life, this DynaCut Extreme 6 inch, 80 grit disc offers a focused abrasive setup tailored to sustained material removal and surface preparation.
Sold In: 1 Package