Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade DynaCut Extreme 6 inch sanding disc is a 120 grit hook and loop abrasive disc in the Dynabrade line, so it targets intermediate stock removal and surface preparation where a controlled, even cut is needed. The disc is described as part of a family that is fast cutting, which helps move through leveling and blending passes efficiently on demanding workloads. It uses aluminum oxide mineral on film, so the abrasive is bonded to a stable backing that supports consistent contact with the work surface. The mineral is micron graded, which means the particle sizes are tightly controlled for a more uniform scratch pattern. That uniformity matters whenever a predictable finish is important, especially as a base for finer steps. The high strength polyester film backing adds toughness to the disc structure, helping it stay flat during sanding. The product falls under abrasive discs, aligning it with common disc sanders and random orbit tools on shop floors.
The disc is listed as a 6 inch 25 hole vacuum sanding disc, indicating multiple dust extraction holes across its face that align with compatible vacuum backup pads to draw dust away from the sanding interface. This vacuum style matters when maintaining a clearer cutting surface is important for efficiency and visibility. The hook and loop mounting interface ties directly into hook and loop backup pads, allowing the disc to be pressed into place for quick setup. That simple engagement helps support rapid grit changes during multi-step sanding sequences. The high strength polyester film backing gives the disc a stable base when it is held against the pad, supporting edge integrity during sweeps over solid surfaces. The 120 grit abrasive face paired with vacuum assist provides a balance of material removal and dust control that suits many intermediate finishing passes on solid surface work.
The disc is described in connection with solid surface finishing, so it is positioned for use on man-made solid surface materials where a controlled, uniform scratch pattern is important before polishing or higher grits. The fast cutting nature of the referenced abrasive family supports leveling seams, shaping transitions, or refining routed edges without extended sanding time. The 6 inch diameter suits random-orbit and disc sanders commonly used on counters, panels, and fabricated assemblies. The 25 hole vacuum configuration works with compatible vacuum pads, pulling fine dust from the contact zone when connected to extraction equipment. That dust removal helps keep the abrasive from loading as quickly, which can maintain the cut rate and reduce interruptions for disc changes during runs.
The aluminum oxide mineral on film construction uses a high strength polyester film as the backing, giving the disc rigidity and tear resistance during use. That structure helps the disc hold its shape against flat pads, supporting even pressure across the sanding path. The micron graded mineral means the aluminum oxide particles are closely controlled in size, so the scratches left by each pass are more predictable. This predictability helps when progressing through a grit sequence, because each step can more effectively remove the previous pattern. The disc is specified at 120 grit, balancing cutting speed with the need for a smoother surface as workpieces move toward finishing. The association with precise and consistent uniform finishes highlights its role when surface consistency across joined or shaped areas is a priority. Being identified for industrial or occupational use indicates it is intended for regular workflow in professional environments where repeatable sanding performance supports daily production demands.
The Dynabrade DynaCut Extreme disc is 6 inches in diameter, so it matches sanders that accept 6 inch hook and loop abrasive discs for panel and solid surface work.
The 6 inch 25 hole vacuum pattern allows dust to be drawn through the disc when used on a matching pad, helping keep the abrasive face clearer during solid surface and similar sanding tasks.
The 120 grit rating places this disc in a medium stage, where it can refine coarser scratches while still removing stock efficiently ahead of finer finishing steps.
The high strength polyester film backing gives the abrasive disc stability and toughness, helping it stay flatter and resist tearing during extended sanding passes.
Micron graded aluminum oxide on film provides tightly controlled particle sizes, creating a more uniform scratch pattern that supports predictable finishing sequences.
The product is described for industrial or occupational use only, so it is positioned for trained users in professional shop or workplace sanding operations.
This Dynabrade DynaCut Extreme 6 inch 120 grit hook and loop sanding disc pairs a micron graded aluminum oxide mineral with a high strength polyester film backing, giving a consistent, fast cutting face for intermediate steps. Its 6 inch diameter and 25 hole vacuum pattern align with many professional sanders and dust extraction pads used on solid surface and similar materials. The disc sits in an abrasive family described as precise and uniform in finish, helping surfaces move cleanly into finer grits. For industrial and occupational sanding workflows that need predictable results, this disc offers a defined role in the grit sequence from stock refinement toward finish-ready surfaces.
Sold In: 1 Package