Dynabrade DynaCut Extreme 6 inch sanding disc is a 1,200 grit abrasive disc designed for very fine sanding where a refined surface is required before the next step. The disc uses premium P graded aluminum oxide abrasives, which cut efficiently while leaving a consistent scratch pattern that supports predictable finishing results. A high performance 3mil film backing makes the disc extremely tough and tear resistant, so it holds up during extended use on demanding sanding passes. The 6 inch disc size with 25-hole pattern supports vacuum-style dust extraction, helping maintain a cleaner work surface and steady cutting action. The abrasive is bonded to the film backing to generate very fine finishes, which matters when preparing surfaces for subsequent coatings or polishing work. The Dynabrade DynaCut Extreme design focuses on fast cut, long life, and consistent fine results in everyday sanding workflows.
The hook and loop attachment system on this Dynabrade DynaCut Extreme disc lets it mount to a compatible hook and loop backup pad with a simple press, so it can be installed or removed quickly between grit changes. The 6 inch diameter works with 6 inch hook and loop pads designed for 25-hole vacuum patterns, supporting alignment with the pad holes for effective dust extraction. Because the hook and loop design allows discs to be removed without damage when not fully worn, partially used 1,200 grit discs can be taken off and reapplied later, helping align disc condition with specific finishing stages on recurring work.
This Dynabrade DynaCut Extreme 6 inch 1,200 grit disc is built around a 25-hole pattern that supports use on vacuum-style sanding tools designed for 6 inch film-backed hook and loop discs. The vacuum hole layout helps draw dust away from the cutting surface, which matters when working with materials that can quickly load the abrasive. With premium P graded aluminum oxide abrasives, the disc maintains a fast cut even at 1,200 grit, so it can refine surfaces while still removing fine imperfections. The high performance 3mil film backing adds stability to the sanding face, giving more consistent contact across the disc and supporting an even finish across panels and edges. The 1,200 grit level positions this disc for very fine sanding tasks where a smooth, uniform surface is required before further finishing steps.
The extremely tough and tear resistant 3mil film backing on this Dynabrade DynaCut Extreme disc provides strength under pressure, which helps the disc stay flat and intact when sanding edges, profiles, or larger flat areas. This backing generates the finest finishes and delivers up to 4X the life of paper discs, so it contributes both to surface quality and to extended disc life in daily use. The proprietary clog free coating is pigment free and build-up resistant, which keeps dust from sealing the abrasive surface and supports a predictable cut over longer runs. Because the coating and film backing work together to maintain a clean, stable sanding face, operators can run more consistent passes with reduced loading, helping each 1,200 grit disc carry through more pieces before it is fully worn.
This Dynabrade DynaCut Extreme disc uses premium P graded aluminum oxide abrasives, which provide fast cutting action and help maintain a consistent scratch pattern for controlled finishing work.
The 1,200 grit size generates very fine finishes, so it is suited to final sanding passes where a smooth, refined surface is needed before additional finishing steps or light polishing.
The Dynabrade 91613 disc uses a high performance 3mil film backing, which is extremely tough and tear resistant, supporting stable sanding contact and long disc life.
The 25-hole design supports use on vacuum-style setups, allowing dust to be drawn through the disc pattern, which helps keep the abrasive surface cleaner during sanding.
The proprietary clog free coating is pigment free and build-up resistant, helping prevent dust from sealing the abrasive and supporting consistent cutting over longer runs.
The hook and loop attachment system allows quick disc changes and reuse of partially worn discs, helping align disc wear with each sanding stage and reducing downtime.
The Dynabrade DynaCut Extreme 6 inch 1,200 grit hook and loop disc combines premium P graded aluminum oxide, a tough 3mil film backing, and a clog free coating to support fine sanding passes with extended disc life. The 25-hole configuration and hook and loop attachment system work with appropriate vacuum pads to streamline dust extraction and disc changes. Choosing this Dynabrade 91613 disc aligns very fine 1,200 grit finishing needs with durable film construction, so sanding workflows can stay focused on consistent, repeatable surface results.
Sold In: 1 Package