Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade DynaCut Extreme 6 inch sanding disc describes a 6 inch abrasive disc that uses a hook and loop attachment, so installers can mount or swap discs quickly on compatible backup pads during sanding work. The disc uses aluminum oxide on a film backing, which delivers an abrasive surface that cuts while the film support holds its shape under contact pressure. The 220 grit rating identifies a fine abrasive grade, so users can refine surfaces after coarser grits and move toward finish sanding. A 25-hole pattern is designed into the disc, allowing dust to be drawn away when used with matching vacuum systems, which helps keep the abrasive face working rather than clogging. The disc is part of the Dynabrade DynaCut Extreme line, so buyers can match this piece with other grit steps in the same system when building a process.
The hook and loop backing on this Dynabrade DynaCut Extreme disc provides a fabric-style attachment that mates to a compatible pad, which lets installers install the disc by pressing it in place. This approach lets users remove the disc without tools when changing to another grit, which supports step-sanding sequences. The 6 inch diameter means it aligns with many 6 inch hook and loop pads, giving a defined sanding footprint in use. Because the disc incorporates a 25-hole pattern, it works with matching vacuum-style pads that draw dust off the work surface as the disc moves. The 220 grit abrasive grade targets applications where the substrate has already been leveled with coarser media and needs finer refinement.
This Dynabrade DynaCut Extreme abrasive disc is described as having 3M 268L and 366L fast cutting abrasives that provide a precise and consistent uniform finish, so it fits tasks where appearance consistency matters. The disc is identified as providing excellent use for solid surface finishing, which aligns it with operations that move across wide countertop or panel sections. Because the mineral is described as premium micron graded on high strength polyester film, the abrasive points are controlled to a defined size on a stable backing, so users can expect each pass to contribute predictably to the final texture. The special Fre-Cut coating is noted on 366L only, and that coating resists loading and reduces heat build-up, so within that part of the range the abrasive surface can stay open longer when working on materials prone to clogging.
The 220 grit level on this disc sets it in the finer range of the 180 through 15 micron offering, so it helps bridge from more aggressive stock removal toward pre-finish surface preparation. The high strength polyester film backing supports the premium micron graded mineral, which helps the abrasive maintain flatness and edge integrity as it travels over seams or transitions. The 25-hole design through the disc allows vacuum systems, when matched with suitable pads, to pull sanding dust away from the contact zone, so more abrasive grain remains exposed to do work. The hook and loop connection works with this setup by allowing the disc to be oriented so that its hole pattern aligns with pad ports, so dust paths remain open. Bringing these elements together on a 6 inch platform gives installers a defined coverage area per pass while supporting controlled, repeatable finishing steps.
The Dynabrade DynaCut Extreme 6 inch disc uses aluminum oxide on a film backing, so the cutting mineral sits on a stable base that supports consistent material removal.
The 220 grit grade places this disc in a fine sanding range, so it is suited to refining surfaces after coarser grits and moving a workpiece toward a smoother finish.
The disc has a 25-hole pattern that allows vacuum systems, when matched with suitable pads, to draw dust away so abrasive grains stay more exposed to cut.
The hook and loop backing lets the disc attach to a compatible pad by pressing it in place, so users can change discs quickly when moving between grit steps.
The disc is described as excellent for solid surface finishing and, at 220 grit, it aligns with intermediate to fine stages between heavier cutting and final finishing.
The premium micron graded mineral on high strength polyester film provides controlled abrasive sizing on a stable backing, which supports a uniform surface finish.
The Dynabrade DynaCut Extreme 6 inch sanding disc combines aluminum oxide on film, a 220 grit rating, hook and loop backing, and a 25-hole layout, so it fits into sanding setups that value consistent solid surface finishing. The connection to fast cutting abrasives that provide a precise and consistent uniform finish ties this disc to workflows where surface appearance and repeatability drive tool choices. When a job calls for a 6 inch hook and loop disc in this grit range, this Dynabrade option gives buyers a defined abrasive construction and hole pattern to match into their existing vacuum and pad systems.
Sold In: 1 Package