Dynabrade DynaCut raised panel strip is a 7/8 inch wide by 4-1/2 inch long aluminum oxide abrasive designed for use on raised panel sanding jobs. The 80 grit, P-grade aluminum oxide grain cuts sharply on hard and soft woods, plastics, fiberglass, composites, and fabricated metals, so one strip can stay in play across mixed-material projects in the same shop. The premium film backing resists edge tearing during use, which lets the strip conform along profiles without fraying at the edges. That same backing promotes better grain adhesion, so abrasive stays on the strip longer and supports a longer useful life between changes. A hook-face backing works with a hook and loop attachment system, so strips attach securely while still coming off cleanly when it is time to change or reuse them. The strip is intended for fine sanding and polishing, giving raised panels and detailed surfaces a refined finish.
This aluminum oxide on film raised panel strip uses a hook-face, hook and loop attachment system, so it fastens directly to a compatible sanding head without tools. The quick-on, quick-off interface supports frequent grit or strip changes during a sequence of sanding steps. The 7/8 inch width and 4-1/2 inch length are sized to suit raised panel sanding work, helping the abrasive contact the profile evenly. The strip is described for use on the Dynabrade 57906 Raised Panel Sander, tying its dimensions and backing to that application. Because it is intended for fine sanding and polishing, this strip fits into the later stages of a sanding workflow, where a consistent, controlled cut is needed rather than heavy stock removal.
This Dynabrade aluminum oxide on film raised panel strip is intended for use on the Dynabrade 57906 Raised Panel Sander, so its size and hook-face backing match that tool. The 7/8 inch width helps the strip track along raised panel edges and detailed contours without overhanging too far into flat fields. At 4-1/2 inches long, the abrasive contacts enough surface to blend transitions while still following profiles. Because the 80 grit P-grade aluminum oxide cuts effectively on hard and soft woods, plastics, fiberglass, composites, and fabricated metals, one strip can move between cabinet components, composite panels, and metal fixture edges in the same workspace. Its role is focused on fine sanding and polishing, so it works well after coarser grits have already shaped the profile. That placement in the sequence aligns the strip with surface refinement tasks, where consistent cut and surface uniformity matter.
The premium film backing on this raised panel strip resists edge tearing, which is important when guiding the strip across profiles and corners because it helps prevent the abrasive from shredding at high-stress points. That durability allows more complete use of the 80 grit surface before retirement. The film also promotes better grain adhesion, meaning the aluminum oxide stays bonded to the backing longer and carries its cut characteristics deeper into the strip life. This supports predictable performance across multiple workpieces. The hook-face backing ties directly into a hook and loop attachment system, so the strip locks down securely on a compatible pad but releases cleanly when pulled away. That design enables quick strip changes during a job and allows partially used strips to be removed and later returned to service. Together, these details support a repeatable sanding workflow on raised panels and similar detailed parts.
The raised panel strip measures 7/8 inch wide by 4-1/2 inches long, so it suits narrow profiles and detailed panel edges where controlled abrasive contact is needed.
The strip uses P-grade 80 grit aluminum oxide on a film backing, so it provides sharp, free cutting action suitable for fine sanding and polishing steps.
This abrasive is described for use on hard and soft woods, plastics, fiberglass, composites, and fabricated metals, so it covers a broad range of common shop materials.
The hook-face, hook and loop system lets the strip fasten securely to a compatible pad while still allowing quick removal, so grit changes or strip rotation take minimal time.
This strip is described for use on the Dynabrade 57906 Raised Panel Sander, aligning its size and backing style with that sander for panel work.
The premium film backing resists edge tearing and improves grain adhesion, so the strip maintains its cutting surface longer during repeated raised panel sanding passes.
This Dynabrade DynaCut raised panel strip pairs an 80 grit P-grade aluminum oxide grain with a premium film backing to support fine sanding and polishing. The hook-face, hook and loop attachment system aligns with raised panel sanding workflows where quick abrasive changes are part of the process. Its 7/8 inch by 4-1/2 inch size targets detailed profiles while still covering enough surface for efficient blending. For work across wood, plastics, fiberglass, composites, and fabricated metals, this strip offers a focused option for finishing passes on raised panels and other contoured parts.
Sold In: 50 Each