Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade DynaCut 120 Grit Raised Panel Strip uses premium P grade aluminum oxide on film to cut quickly on hard and soft woods, plastics, fiberglass, composites, and fabricated metals, so one strip serves multiple shop materials without switching abrasives. The strip measures 7/8 inch wide by 4-1/2 inch long, giving a narrow profile that tracks raised panel contours and profiles with better control. The aluminum oxide grain is described as sharp and free cutting, which helps the abrasive bite efficiently instead of loading prematurely on typical woodworking and fabrication surfaces. A film backing is used rather than paper, and that film resists edge tearing, which helps the strip stay intact when running along edges and panel details. That same film backing promotes better grain adhesion, helping the abrasive stay bonded to the backing for a longer useful life in daily sanding and polishing work.
The strip uses a hook and loop attachment system, which lets it fasten to compatible hook-face tools without adhesives or clamping, helping installers and fabricators change abrasives quickly between stages. The strip is noted as having no holes, which suits tools that rely on surface contact rather than through-strip dust extraction. It is identified as a DynaCut Raised Panel Strip and is specified for use on the Dynabrade 57906 Raised Panel Sander, so the dimensions and hook-face layout are matched to that sander for proper engagement during use. The 7/8 inch by 4-1/2 inch size works with raised panel sanding paths, aligning the abrasive contact area with panel profiles for controlled passes.
This product is identified as a DynaCut Raised Panel Strip for use on the Dynabrade 57906 Raised Panel Sander, so it is suited to workflows built around that specific tool. The 7/8 inch width allows the strip to follow narrow raised panel contours, which helps focus the cut on the profile instead of the surrounding field. At 4-1/2 inches in length, the strip spans a practical contact area on the sander, supporting steady tracking along cabinet doors, panels, and similar components. Because the coating works on hard and soft woods, plastics, fiberglass, composites, and fabricated metals, a single abrasive specification can cover woodworking, shop-made composite fixtures, and light fabricated metal details on the same bench. Being described as ideal for fine sanding and polishing, the 120 grit finish suits final passes where surfaces are readied for finishing or where light polishing is required on compatible materials.
The premium P grade aluminum oxide grain is described as sharp and free cutting, which helps the abrasive cut efficiently at 120 grit, refining the surface without excessive pressure. That sharp cut is useful when moving from coarser grits into fine sanding passes, as it can remove prior scratch patterns while leaving a smoother finish. The premium film backing resists edge tearing, so the strip is better able to withstand directional changes and edge contact on raised panel details during extended use. Because the film backing also promotes better grain adhesion, the abrasive particles remain bonded to the strip longer, which supports consistent cutting performance across the life of the strip. The hook and loop attachment system allows the strip to be removed and saved when not completely worn, which lets users dedicate partially used strips to specific materials or stages while still taking advantage of the remaining cutting life. Identifying the product by manufacturer part number 93670 gives a precise reference when matching abrasives to existing Dynabrade DynaCut setups or specifying exact strips in job planning.
This strip is coated with premium P grade aluminum oxide for use on hard and soft woods, plastics, fiberglass, composites, and fabricated metals, so it can stay in use across varied shop materials.
The raised panel strip is 7/8 inch wide by 4-1/2 inch long, providing a narrow abrasive contact area suited to tracking along raised panel profiles and detailed edges.
The hook and loop attachment lets the strip fasten to compatible hook-face tools for quick changes, allowing users to swap or rotate strips with minimal interruption to sanding.
This product is described as ideal for fine sanding and polishing, so its 120 grit construction is suited to refinement stages rather than aggressive stock removal.
The strip is described for use on the Dynabrade 57906 Raised Panel Sander, aligning its size and hook-face configuration with that dedicated raised panel sanding tool.
The premium film backing resists edge tearing and promotes better grain adhesion, which helps the strip maintain integrity and cutting ability through repeated raised panel passes.
This Dynabrade DynaCut 120 Grit No Hole Hook and Loop Aluminum Oxide on Film Raised Panel Strip provides a 7/8 inch by 4-1/2 inch format that matches raised panel sanding tasks. The sharp, free-cutting aluminum oxide grain works on hard and soft woods, plastics, fiberglass, composites, and fabricated metals, so one abrasive format can move across different materials in the same shop. With a film backing that resists edge tearing and supports better grain adhesion, the strip delivers extended useful life under daily use. The hook and loop attachment system lets it connect quickly to compatible hook-face tools, including the Dynabrade 57906 Raised Panel Sander, supporting efficient changeovers. Use this strip when a dedicated raised panel abrasive is needed for fine sanding and polishing steps.
Sold In: 50 Each