Dynabrade DynaCut 320 Grit strip is a raised panel strip designed for fine sanding and polishing, so it finishes profiles and edges to a smooth, consistent surface. The strip uses P grade aluminum oxide on film, which cuts sharply across hard and soft woods, plastics, fiberglass, composites, and fabricated metals, helping one abrasive handle mixed-material jobs. The aluminum oxide grain is free cutting, allowing material removal with less loading, which supports a more predictable scratch pattern. A premium film backing resists edge tearing, so the strip stays intact on detailed raised panel contours. That same backing promotes better grain adhesion, extending useful life before changing strips. The hook and loop attachment aids quick strip changes between grits or profiles, helping keep the Dynabrade 57906 Raised Panel Sander working efficiently.
The hook and loop attachment on this aluminum oxide strip lets it secure to a hook-face backing pad on the Dynabrade 57906 Raised Panel Sander, so installation is a simple press-on operation. Because the strip measures 7/8 inch (1 mm) wide by 4-1/2 inch (114 mm) long, it matches the intended raised panel sanding interface, aligning the abrasive with the tool's contact area. The no hole configuration keeps the abrasive surface uninterrupted along its length, so the contact pattern stays consistent on narrow profiles and edges. Being a DynaCut Raised Panel Strip designed for this sander, it supports repeatable positioning each time it is installed.
This aluminum oxide hook-face DynaCut Raised Panel Strip is for use on the Dynabrade 57906 Raised Panel Sander, so it fits directly into workflows built around that tool. Its ability to sand hard and soft woods suits cabinet doors, furniture components, and decorative trim that combine different species. Because it also works on plastics, fiberglass, composites, and fabricated metals, the same abrasive type can support mixed-material assemblies such as composite panels or fabricated metal details that border wood sections. The 7/8 inch width focuses the abrasive along raised profiles and narrow edges, while the 4-1/2 inch length provides sufficient contact area for controlled passes on these shapes.
The 320 grit rating makes this strip ideal for fine sanding and polishing, so it serves as a later step after coarser abrasives to refine the surface. The P grade aluminum oxide grain cuts sharply yet finely, which produces a smoother finish across woods and other listed materials without deep scratches to chase out. Its premium film backing resists edge tearing when following profiles, helping the strip maintain full width contact along detailed contours and preventing stray edges that could mark the workpiece. Better grain adhesion on the film keeps abrasive particles in place through extended use, which maintains a consistent scratch pattern from the first panel to the last. Together with the hook and loop attachment system, these details create a strip that can be applied, removed, and reused when not completely worn, supporting efficient grit progression and consistent finish results on the Dynabrade 57906 Raised Panel Sander.
This DynaCut Raised Panel Strip uses P grade aluminum oxide on film, which provides sharp, free cutting action on hard and soft woods, plastics, fiberglass, composites, and fabricated metals during fine sanding tasks.
The hook and loop attachment system allows quick disc changes and lets partially worn strips be saved for future use, so switching grits or profiles on the Dynabrade 57906 Raised Panel Sander takes minimal time.
This raised panel strip measures 7/8 inch (1 mm) wide by 4-1/2 inch (114 mm) long, focusing the abrasive on narrow raised profiles while providing enough length for stable contact along the sanding path.
This aluminum oxide hook-face DynaCut Raised Panel Strip is for use on the Dynabrade 57906 Raised Panel Sander, aligning its size and attachment method with that specific raised panel tool.
The 320 grit rating makes this strip ideal for fine sanding and polishing, so it is typically used after coarser abrasives to refine surfaces to a smooth, finish-ready condition.
The premium film backing resists edge tearing and promotes better grain adhesion, which keeps the strip intact along profiles and maintains a consistent scratch pattern over a longer useful life.
This Dynabrade DynaCut 320 grit aluminum oxide on film raised panel strip combines a sharp, free cutting grain with a tear-resistant film backing, so it supports fine sanding and polishing across woods, plastics, fiberglass, composites, and fabricated metals. Its 7/8 inch by 4-1/2 inch size and hook and loop attachment are configured for the Dynabrade 57906 Raised Panel Sander, helping align installation and use with that tool. For raised profiles and detailed edges where consistent finish quality matters, this strip provides an abrasive option tailored to that sanding role.
Sold In: 50 Each