Grass Kinvaro T-Slim Set Soft-Close Stone 1000-2250 Power Factor

Grass Kinvaro T-Slim Set For Wood Fronts

Grass Kinvaro T-Slim set is a lift-up flap fitting for fronts made from wood in inset applications, so it supports lift-up doors where the front sits flush within the cabinet and preserves a clean, built-in appearance across the run. This T-Slim lift-up flap fitting is described as flush inset for high design requirements and maximum storage space, so the hardware sits recessed into the cabinet side and front and leaves more usable interior room for contents above work areas. The specified milling depth of 12.2 mm in the cabinet side and 13.7 mm in the front means the carpenter can route precise pockets to sink the components, which keeps the mechanism concealed and protects the edges from knock damage in daily use. Three different power factors are available for this Kinvaro T-Slim lift system, allowing the installer to match the spring strength to the flap size for balanced motion and predictable performance.

Key Kinvaro T-Slim Details That Support Jobs

• The low opening forces described for this Kinvaro T-Slim flap fitting mean the front can be raised with modest effort, which helps users of varying strength operate larger wooden flaps comfortably during daily cabinet access.
• The multi-position stop function holds the flap in several positions, so the door can be left partially open during work without drifting, which improves usability around work surfaces and reduces the likelihood of accidental slamming.
• Convenient adjustment of the spring force is built into this lift-up fitting, allowing fine tuning of the opening behavior on site, which helps achieve smooth movement after the actual flap weight and hardware are installed.
• Fast, tool-free clip fitting of the front is specified, so the wooden front can be attached or removed from the mechanism without tools, which speeds up installation, adjustments, and any later refinishing or service tasks.
• The flap offers 3-dimensional adjustment of height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth +3.0 mm / -1.0 mm, enabling precise alignment with adjacent fronts and reveals after installation to meet demanding design layouts.
• A 107 degree opening angle is specified for this system, so the flap opens wide for access while keeping a defined motion path, which supports layout planning above counters and helps avoid unexpected interference with nearby elements.

Installation And Adjustment Features For Fit

The specified milling depth of 12.2 mm in the cabinet side lets the mechanism sit recessed in the panel, which keeps the hardware flush with the side and supports a streamlined, high-end cabinet interior. The front milling depth of 13.7 mm allows the fitting to integrate into the flap itself, so the installed front remains low-profile while still engaging fully with the lift system. Fast, tool-free clip fitting of the front means the flap can be mounted after the body hardware is set, which gives the installer freedom to hang and remove the front during milling checks and finish work without extra fastening steps. With convenient adjustment of the spring force built in, the same mechanism can be tuned once the actual wooden flap is mounted, so the door stays open reliably and closes in a controlled way for the specific application.

Using The Kinvaro T-Slim In Cabinet Projects

Where This Flush Inset Flap Fitting Excels

This T-Slim lift-up flap fitting is specified for fronts made from wood in inset configurations, so it is suited to cabinet runs where the front needs to sit flush with the face of the case for a clean, furniture-style facade. The flush inset design is described as meeting high design requirements and maximizing storage space, so it works well in projects where interior volume and a minimal look are both priorities, such as upper cabinets over work surfaces. The availability of three different power factors means the same Kinvaro T-Slim family can address a range of flap sizes and weights, which helps maintain consistent motion across multiple cabinets in the same installation. Cover caps and adapters are available in Stone, Ice, and Silver, and the description states that all cover caps can be painted, so visible components can blend with the cabinet color scheme or be finished for custom design requirements.

How Kinvaro Adjustments Support Precise Results

The flap on this Kinvaro T-Slim system offers 3-dimensional adjustment of height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth +3.0 mm / -1.0 mm, so the installer can fine-tune the front position after mounting to align reveals and joint lines in demanding layouts. The low opening forces combined with the multi-position stop help the flap move smoothly into place and stay where it is left, which reduces strain on the hardware and provides predictable handling when users work under open fronts. This version is specified with integrated damping described as soft-close, with the damper that can be switched on or off, so the closing speed can be tailored on site to the project needs while still using the same lift mechanism. An integrated opening angle reduction clip with optional activation to 75 degrees is also described, so the opening travel can be limited where overhead clearance or nearby structures require a smaller swing path. Fast, tool-free clip fitting of the front supports these adjustments because the flap can be removed, milled, and remounted repeatedly while dialing in spring force and alignment. The 107 degree opening angle when fully open provides generous access in standard situations, while the optional reduction maintains flexibility when space around the cabinet is constrained.

Common Kinvaro T-Slim Wood Flap Questions

Selecting This Kinvaro T-Slim For Your Project

This Grass Kinvaro T-Slim set combines a flush inset lift-up design, low opening forces, and multi-position stop to support modern wood flap fronts in everyday cabinet use. The specified milling depths and 3-dimensional adjustment ranges give installers clear parameters for routing and alignment, helping complex fronts line up with surrounding cabinetry. With integrated soft-close damping that can be switched on or off, an optional opening angle reduction to 75 degrees, and three different power factors, this system provides flexibility for a range of flap sizes and site conditions. For projects calling for a concealed lift system with high design expectations, these described features help deliver both visual integration and repeatable motion.