Grass Kinvaro T-Slim Set Soft-Close Stone 250-550 Power Factor

Grass Kinvaro T-Slim Set For Flush Wooden Fronts

Grass Kinvaro T-Slim set is a lift-up flap fitting designed for fronts made from wood in inset applications, so it supports flap-style cabinet fronts where a clean, flush look is required. The fitting is described as a flush inset flap fitting for high design requirements and maximum storage space, which means the hardware sits neatly within the cabinet geometry to keep usable interior depth. A milling depth of 12.2 mm on the cabinet side and 13.7 mm on the front defines the recess needed, guiding precise machining for a snug, accurate fit. Low opening forces and a multi-position stop work together so the flap can be moved with modest effort and then held in intermediate positions, which helps when accessing the cabinet at different heights during frequent use.

Functional Details That Support Lift System Performance

• The flush inset design for high design requirements and maximum storage space keeps the mechanism embedded in the cabinet layout, which preserves interior volume while maintaining the clean visual lines often required in modern work or kitchen environments.
• The specified milling depth of 12.2 mm in the cabinet side provides a clear machining reference, so fabricators can route or bore to a consistent depth and seat the lift unit without excess play that could affect alignment.
• The 13.7 mm milling depth in the front defines the pocket for the front-side components, helping ensure that the flap front sits correctly relative to the cabinet frame for a true inset appearance once everything is installed.
• Low opening forces reduce the effort required to raise the flap, which is useful where larger or heavier wooden fronts are used and where repeated opening throughout the day would otherwise fatigue users.
• The multi-position stop lets the flap remain at several angles instead of only fully open, which supports tasks that need partial access while keeping the front safely held without relying on constant hand support.

Installation And Adjustment For Wooden Inset Fronts

The T-Slim lift-up flap fitting is intended specifically for fronts made from wood in inset configurations, so the installation workflow centers around routing or milling to the stated cabinet side and front depths. Fast, tool-free clip fitting of the front allows the prepared wooden front to be attached to the mechanism without separate fastening steps, which can reduce bench time during assembly or on-site adjustment. Convenient adjustment of the spring force is built into the fitting, so the lifting behavior can be tuned to the front weight within the stated power factor range of 250-550, leading to more controlled motion. The flap offers 3-dimensional adjustment of height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth +3.0 mm / -1.0 mm, which provides room to fine-tune gaps and reveals after mounting.

Using The T-Slim Lift System In Cabinet Projects

Where This T-Slim Lift-Up Fitting Works Best

The T-Slim lift-up flap fitting is described as suitable for fronts made from wood in inset applications, so it is oriented toward cabinets where the flap front sits within the cabinet frame rather than overlaying it. The flush inset flap fitting description aligns with high design requirements, so it supports projects where the appearance of continuous planes and precise joints is important, such as contemporary furniture or built-in storage. Maximum storage space is highlighted, meaning the compact mechanism is arranged so interior depth is largely preserved, which benefits cabinets that need to retain volume for contents behind the flap. The 107 degree opening angle allows the flap to move beyond vertical to a wide-open position, which helps keep the front clear of the user during access and improves reach into the cabinet interior.

Adjustment Features That Support Repeatable Alignment

The T-Slim system provides convenient adjustment of the spring force, so the technician can adapt the lift characteristics to three different power factors within the 250-550 range, which helps the front move smoothly rather than slamming or drifting. Flap adjustment in three dimensions - height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth +3.0 mm / -1.0 mm - gives controlled ways to correct small deviations in drilling or milling, so gap lines can be brought into alignment after installation. An integrated opening angle reduction clip with optional activation, reducing the opening angle to 75 degrees, lets the installer match the opening range to situations with overhead constraints, so the flap does not interfere with ceilings or adjacent structures. Cover caps and adapters are available in Stone, Ice, and Silver, and all cover caps can be painted, which allows the visible parts of the fitting to be coordinated with cabinet finishes for a more unified appearance in the final installation. The fast, tool-free clip fitting of the front supports quick removal and reattachment when fine-tuning these adjustments, which can shorten the time required to reach consistent, professional alignment results across multiple cabinets.

Common Questions About Kinvaro T-Slim Lift System

Selecting This Kinvaro T-Slim Set For Your Project

The Kinvaro T-Slim set with soft-close damping and a specified power factor range of 250-550 is oriented toward wooden inset flap fronts where controlled lifting and closing are important. Integrated damping that can be switched on or off lets the motion be set either for cushioned closing or for a more direct action, depending on the application. With Grass Kinvaro lift systems focused on flush inset fitting, defined milling depths, and multi-directional adjustment, this set suits projects where visual accuracy and efficient access both matter. For cabinet or furniture builds needing a lift-up wood front with high design requirements and maximum storage space, this configuration provides a clearly defined set of functional parameters.