Grass Kinvaro T-Slim Set Soft-Close Ice 250-550 Power Factor

Grass Kinvaro T-Slim Set For Flush Inset Flaps

Grass Kinvaro T-Slim set is a lift-up flap fitting designed for fronts made from wood in an inset application, so it supports front panels that sit flush within the cabinet frame for a clean, high-design look. This flush inset flap fitting is built for high design requirements and maximum storage space, which helps keep the interior clear while maintaining a minimalist exterior. A milling depth of 12.2 mm in the cabinet side and 13.7 mm in the front lets you plan precise machining steps, so the mechanism sits fully recessed and does not intrude into the cabinet opening. The set is part of the Grass Kinvaro lift systems family, tying it to a known class of lift-up hardware for work surfaces and tables, lift systems, lid supports, and stays.

Lift System Details That Support Daily Use

• The T-Slim lift-up flap fitting for fronts made from wood (inset) keeps the hardware concealed in the cabinet side and front, which protects the mechanism and leaves more usable interior space around the opening.
• Low opening forces let the front move with minimal effort, which helps when lifting wider or heavier wooden flaps repeatedly during normal cabinet use throughout a workday.
• The integrated multi-position stop holds the flap at several positions during opening, so the user can pause the front where needed without it dropping or springing fully open, which supports controlled access in tight spaces.
• Convenient adjustment of the spring force allows tuning the lift action to the specific front weight within the 250-550 power factor range, which helps balance movement for different door sizes on the same project.
• Fast, tool-free clip fitting of the front speeds installation and later removal, which shortens assembly time and simplifies adjustments or front replacement during service work.
• Three different power factors are available within the T-Slim concept, which supports matching the lifting performance to a range of flap dimensions and weights on wood fronts.

Flush Inset Installation And Adjustment Control

The milling depth of 12.2 mm in the cabinet side and 13.7 mm in the front defines the exact material removal required, so machining can be set up for repeatable runs on multiple cabinets. A 107 degree opening angle provides a wide access range, which helps keep the flap clear of the user when lifted and improves reach into the cabinet. The integrated opening angle reduction clip can be activated to limit the opening angle to 75 degrees, which is useful where overhead obstructions or upper cabinets restrict full swing. Flap adjustment in height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth +3.0 mm / -1.0 mm gives three-dimensional tuning, so the front can be aligned precisely with adjacent fronts and gaps after installation.

Using This Grass Kinvaro Lift System In Projects

Where This T-Slim Lift-Up Fitting Works

The T-Slim lift-up flap fitting for fronts made from wood (inset) suits applications where a flush inset front is required, so fronts can sit even with the surrounding surfaces while still lifting up smoothly. Because it is a flush inset flap fitting for high design requirements and maximum storage space, it is suited to upper cabinets, overhead storage, or work-surface lift fronts where interior space and a clean front view both matter. The system is part of Grass Kinvaro lift systems within work surface and tables and lift systems, lid supports, and stays, which positions it as a solution for flap-style openings instead of traditional side-hinged doors. Three different power factors within the concept and the 250-550 power factor version in this set allow the installer to match front size and weight to the correct hardware performance in various cabinet runs.

How T-Slim Details Support Repeatable Alignment

Flap with 3-dimensional adjustment of height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth +3.0 mm / -1.0 mm means the front can be shifted after mounting to fine-tune reveals, which helps achieve consistent gaps across a bank of cabinets without remachining. Convenient adjustment of the spring force lets the installer set the lifting behavior to suit different wooden front thicknesses and weights, which maintains smooth operation and prevents the flap from moving too aggressively or too weakly during opening. Low opening forces reduce the effort needed to lift the flap, which is important when users operate overhead fronts frequently. Fast, tool-free clip fitting of the front allows removal and reattachment during finishing or alignment stages, which streamlines workflow on site. An integrated opening angle reduction clip with optional activation from 107 degrees to 75 degrees provides a built-in way to adapt the opening range, which helps avoid collisions with nearby cabinets or ceilings while keeping motion control within the same fitting.

Common Questions About This Kinvaro T-Slim Set

Selecting This T-Slim Lift System For Your Job

This Kinvaro T-Slim set with 250-550 power factor, 107 degree opening angle, and soft-close option supports flush inset wooden flaps where high design and maximum storage space are priorities. The defined milling depths, multi-position stop, spring force adjustment, and 3-dimensional flap adjustment create a lift system that can be machined, installed, and fine-tuned with predictable results across a project. For installations that need the Ice color cover caps and adapters, this version provides that visual option while staying within the Grass Kinvaro lift systems range.