Grass Kinvaro T-Slim Set Soft-Close Silver 250-550 Power Factor

Grass Kinvaro T-Slim Set For Lift-Up Fronts

Grass Kinvaro T-Slim set is a lift-up flap fitting designed for fronts made from wood in inset applications, so you can build overhead or wall units where the flap lifts cleanly without protruding past the cabinet face. This T-Slim lift-up flap fitting is flush inset, which keeps the hardware hidden in the cabinet side and front, supporting high design requirements while preserving maximum storage space inside the case. The set is specified for a 250-550 power factor range, aligning the fitting with fronts in that load band so the lift performance matches the intended flap size and weight. The system is supplied in a silver finish, which helps it disappear visually in lighter cabinet interiors and coordinates with other silver-finished components in a project.

Key Kinvaro T-Slim Details That Aid Builds

• The milling depth at the cabinet side is 12.2 mm, allowing the mechanism to sit recessed in the sidewall so the interior remains clear for storage and shelf layouts.
• The milling depth at the front is 13.7 mm, which lets the flap hardware sit flush in the door edge so the front closes level with the cabinet and preserves tight reveal lines.
• The fitting delivers low opening forces with a multi-position stop, so the flap can be lifted with modest effort and stay reliably in intermediate positions during access or fitting work.
• Spring force is conveniently adjustable, letting installers tune the lift behavior to the specific flap size and weight within the 250-550 power factor range for controlled movement.
• The front attaches using a fast, tool-free clip fitting, which speeds installation and front changes because the flap can be mounted or removed without separate fastening steps.
• The flap offers 3-dimensional adjustment of height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth +3.0 mm / -1.0 mm, helping dial in reveals and alignments after the case is set.

Lift-Up Flap Installation And Opening Control

The Kinvaro T-Slim flap fitting provides a 107 degree opening angle, so the front lifts well clear of the cabinet opening for headroom and access when the unit is installed at eye level or above. An integrated opening angle reduction clip can be optionally activated to limit opening to 75 degrees, which helps in installations under soffits or shelves where full travel would contact overhead structures. The system can be configured in a version with integrated damping as a soft-close, with the damper switchable on or off, allowing the closing behavior to be matched to the application. Another available version uses an integrated automatic opening system called Tipmatic Plus, which supports touch-activated opening workflows where a handle-free front is part of the design intent.

Using This Flush Inset Lift System In Projects

Where This Flush Inset Flap Fitting Works

This flush inset flap fitting is intended for fronts made from wood, so it slots into standard cabinetmaking workflows using common board materials. Because it is designed for inset fronts, the system supports layouts where the flap sits inside the cabinet frame, which is often specified for furniture-grade pieces and clean-lined built-ins. The flush inset design means the hardware is recessed into both the cabinet side and front, which keeps the mechanism largely concealed in use and maintains a smooth interior profile. With this approach, valuable cabinet volume is preserved, because the operating parts do not project deeply into the storage space. High design requirements are supported by the discrete installation, which helps maintain continuous grain or panel layouts across multiple fronts while the lift function remains unobtrusive. The silver finish complements many contemporary interiors, letting the opened cabinet still present a coordinated interior when the flap is raised.

Adjustment Options That Support Precise Results

The Kinvaro T-Slim system offers convenient adjustment of the spring force, so the opening and closing behavior can be tuned to match the specific power factor of the flap within the 250-550 range. This adjustment helps the front move in a controlled way, supporting repeatable motion over time. Three-dimensional flap adjustment with height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth +3.0 mm / -1.0 mm provides room to refine gaps after the cabinet is hung and aligned. These ranges allow corrections for small case and drilling tolerances so reveals remain consistent across a run of cabinets. The multi-position stop combines with these adjustments to keep the flap parked at useful angles while fit-up is checked or hardware inside the cabinet is accessed. Fast, tool-free clip fitting of the front also helps during alignment, because the flap can be removed and reattached quickly while dialing in the final position. Together, these adjustment and fitting details support efficient installation with minimal rework on site.

Common Questions About Kinvaro T-Slim Use

Selecting This Kinvaro T-Slim For Your Project

This Grass Kinvaro T-Slim set in silver is specified as a lift-up flap fitting for inset wood fronts in the 250-550 power factor range, so it aligns with many wall cabinet and high-design storage applications. With its flush inset design, three-dimensional adjustment, low opening forces, and optional soft-close or Tipmatic Plus versions, it supports clean aesthetics and controlled movement in everyday use. Use these verified details to match this lift system to your planned flap size, material, and opening behavior targets.