Grass Kinvaro T-Slim Set Soft-Close Silver 1500-3375 Power Factor

Grass Kinvaro T-Slim Set For Wood Flap Fronts

Grass Kinvaro T-Slim set is a lift-up flap fitting designed for fronts made from wood in inset applications, so it supports clean front designs where the door sits flush with the cabinet. This flush inset flap fitting is intended for high design requirements and maximum storage space, which helps keep internal volume usable while hiding the mechanism in the cabinet side and front. A milling depth on the cabinet side of 12.2 mm and on the front of 13.7 mm lets you rout precise pockets so the hardware sits concealed. Low opening forces combined with a multi-position stop mean the flap can be moved with modest effort and held at various positions, which is useful when working at a counter or accessing stored items.

Key Kinvaro T-Slim Details That Help On Site

• The convenient adjustment of the spring force lets you tune how strongly the lift system supports the flap, so you can balance front weight and motion for different wood fronts within the rated power factor range.
• Fast, tool-free clip fitting of the front simplifies mounting the door to the lift mechanism, saving adjustment time during installation or later removal and refit of the flap.
• The flap offers 3-dimensional adjustment of height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth +3.0 mm / -1.0 mm, giving room to dial in precise reveals and alignment with neighboring fronts.
• A 107 degree opening angle allows the flap to swing up for access, creating a wide opening for use while still remaining defined for planning adjacent cabinets or overhanging surfaces.
• The integrated opening angle reduction clip with optional activation to 75 degrees provides a way to limit travel, which helps when working under upper cabinets or obstructions that would interfere with the full 107 degree opening.
• Three different power factors are available within the T-Slim range, letting you select a lift unit matched to the size and weight of the wooden flap so motion stays controlled and predictable.

Kinvaro T-Slim Installation And Front Adjustment

The Kinvaro T-Slim lift-up flap fitting uses milled pockets in the cabinet side at 12.2 mm depth and in the front at 13.7 mm depth, so routing these dimensions gives the hardware its slim, integrated fit. The front attaches using a fast, tool-free clip fitting, which speeds up assembly when hanging multiple fronts or adjusting the layout. Once mounted, the flap offers 3-dimensional adjustment of height, side, and depth, with specified ranges, so you can fine-tune gaps and alignment to neighboring doors and panels. Convenient adjustment of the spring force lets you set how the lift supports the front, which is useful when matching the mechanism to different flap sizes and materials within the intended power factor band.

How This T-Slim Lift System Works In Practice

Flush Inset Lift System For Wood Cabinet Fronts

This T-Slim lift-up flap fitting is specified for fronts made from wood in inset configurations, so it suits applications where the door front sits within the cabinet frame rather than overlaying it. The hardware is described as a flush inset flap fitting for high design requirements and maximum storage space, which means the mechanism nests into milled pockets instead of projecting into the cabinet, leaving more room for stored items. Milling depths of 12.2 mm in the cabinet side and 13.7 mm in the front define the pocket geometry, guiding how to prepare the parts so everything fits within the board thickness. Because the system offers three different power factors, it can be matched within the T-Slim family to various flap sizes and weights, helping the same design language carry across different cabinet widths.

Adjustment, Motion Control, And Motion Options

The Kinvaro T-Slim set provides low opening forces and a multi-position stop, so the flap can be moved smoothly and held at intermediate positions during everyday use, which can be useful when working at a counter under the cabinet. Convenient adjustment of the spring force lets you tune how strongly the mechanism supports the flap, giving control over how the front behaves when opened or closed. With 3-dimensional flap adjustment of height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth +3.0 mm / -1.0 mm, the system offers a wide range for aligning reveals so cabinet runs look consistent. The 107 degree opening angle defines the full travel for unobstructed access, while the integrated opening angle reduction clip with optional activation to 75 degrees offers a way to limit lift where there is an overhang or nearby obstruction. The T-Slim system is available in versions with integrated damping for soft-close, where the damper can be switched on or off, or with an integrated automatic opening system called Tipmatic Plus, which provides a push-to-open style motion for handle-free fronts. Cover caps and adapters are offered in Stone, Ice, and Silver finishes, and all cover caps can be painted, which lets the visible parts match or contrast the cabinet design.

Questions About This Grass Kinvaro T-Slim Set

Choose This Kinvaro T-Slim For Flush Wood Flaps

This Grass Kinvaro T-Slim set in Silver is specified as a lift-up flap fitting for flush inset wooden fronts, combining slim milling depths with multi-position stop and spring force adjustment. For projects requiring high design standards, controlled motion, and maximum storage space, this system offers defined geometry, 3-dimensional adjustment, and selectable power factors that align the hardware with your flap size and weight. Selecting this set lets you build coordinated lift-up fronts that integrate motion options such as soft-close damping or Tipmatic Plus automatic opening into a consistent T-Slim layout.