Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass Kinvaro T-Slim lift-up flap fitting is a flush inset flap fitting for fronts made from wood, so it supports clean, continuous lines on high-design wall cabinets while keeping the front aligned within the cabinet frame. The T-Slim lift-up flap fitting works as a lift system for wood fronts, so the flap pivots smoothly upward rather than swinging out into the room, which is useful where space in front of the cabinet is tight. This T-Slim set is specified for a power factor range from 1500-3375, so it can be matched to flap sizes and weights within that range for balanced opening and closing behavior. The fitting is part of the Grass Kinvaro lift systems family, so it fits into projects that standardize on Grass America hardware for consistent function across multiple cabinets.
Fast, tool-free clip fitting of the front lets the wood flap be attached to the T-Slim lift-up fitting without separate tools, which speeds installation and simplifies fitting during final alignment. The flap offers 3-dimensional adjustment of height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth plus 3.0 mm / minus 1.0 mm, so the front can be finely aligned in all directions to match surrounding fronts and cabinet lines. An integrated, opening angle reduction clip that can be optionally activated changes the standard 107 degree opening angle down to 75 degrees, so the installer can limit the flap swing when overhead clearance or adjacent elements require a smaller opening path.
The T-Slim lift-up flap fitting is designed for fronts made from wood in an inset configuration, so it works well on cabinets where the front sits flush within the cabinet frame rather than overlaying it. Because it is a flush inset flap fitting for high design requirements and maximum storage space, it suits upper cabinets or lift-front storage areas where interior volume and a clean front surface are both priorities. The milling depth of 12.2 mm in the cabinet side and 13.7 mm in the front allows the hardware to recess into both parts, so the cabinet interior stays usable while the exterior shows minimal visible hardware. The 107 degree opening angle supports generous access to the cabinet, and when the optional opening angle reduction clip is activated to 75 degrees, the front stops earlier, which helps avoid interference with ceilings, soffits, or adjacent casework.
Low opening forces make the Kinvaro T-Slim lift-up flap fitting move with modest effort, so repeated daily openings feel consistent and are less demanding when the flap weight is balanced within the 1500-3375 power factor range. The multi-position stop holds the flap at various positions during travel, so users can pause the front partway open while working at the cabinet without the flap drifting. Convenient adjustment of the spring force lets installers match the spring tension to the actual front, so the flap can open reliably and stay in the desired position rather than slamming shut or rising too quickly. The flap with 3-dimensional adjustment in height, side, and depth allows fine-tuning gaps and reveals even after the front is clipped on, supporting tight lines across multiple doors in a run. Fast, tool-free clip fitting of the front also aids repeatable assembly in shop or on site, because the front can be removed and reattached during finishing or adjustment without changing basic settings.
The Kinvaro T-Slim lift-up flap fitting is specified for fronts made from wood in a flush inset configuration, so it suits applications where the front sits within the cabinet frame.
The 1500-3375 power factor range defines the flap size and weight window the set is designed for, so spring force adjustment can balance the front for controlled opening and holding.
The T-Slim lift-up flap fitting uses a milling depth of 12.2 mm in the cabinet side and 13.7 mm in the front, allowing the mechanism to recess into the wood parts for a flush fit.
The Kinvaro T-Slim flap opens to 107 degrees as standard, and the integrated opening angle reduction clip can optionally limit the opening angle to 75 degrees for restricted spaces.
The flap offers 3-dimensional adjustment of height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth plus 3.0 mm / minus 1.0 mm, supporting precise alignment to adjoining fronts.
The T-Slim is available in versions with integrated damping soft-close, where the damper can be switched on or off, and in versions with an integrated automatic opening system Tipmatic Plus.
The Kinvaro T-Slim lift-up flap fitting from Grass America is part of the Grass Kinvaro lift systems category, so it fits projects that standardize on coordinated lift hardware. Its flush inset design for wood fronts, defined milling depths, and 3-dimensional adjustment help align flaps cleanly with adjacent fronts. The 1500-3375 power factor range and adjustable spring force give flexibility to match typical lift-front dimensions within that window. With options for soft-close damping or Tipmatic Plus automatic opening, the T-Slim set provides a lift-up solution that can be specified to suit the functional style of the cabinet run.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set |  GFF161149020204 Mfr# F161149020204 | Grass Kinvaro T-Slim Adapter Set Screw-On, Stone |