Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass Kinvaro T-Slim set is a T-Slim lift-up flap fitting for fronts made from wood (inset) that lifts a wooden front up and out of the work zone, creating access while keeping the front aligned to the cabinet. This flush inset flap fitting for high design requirements & maximum storage space keeps the flap front in plane with the cabinet, which supports clean lines where the front must sit level with the carcass. The milling depth: cabinet side: 12.2 mm, front: 13.7 mm provides precise cut dimensions so the fitting sits fully recessed, supporting a slim look and consistent reveal. Low opening forces and multi-position stop allow the flap to be moved with modest effort and to hold in various positions, helping during daily use and when setting up heavier fronts within the specified power factor range.
The milling depth: cabinet side: 12.2 mm, front: 13.7 mm defines how deep to machine the side and front, which positions the T-Slim lift-up flap fitting correctly recessed into the material. Fast, tool-free clip fitting of the front allows the installer to attach and detach the front without tools, which simplifies trial fitting and incremental adjustment. Flap with 3-dimensional adjustment of height plus or minus 2.5 mm, side plus or minus 2.0 mm, depth +3.0 mm / -1.0 mm supports precise alignment of the inset front so gaps and margins can be dialed in after mounting. Convenient adjustment of the spring force lets the installer tune the lifting support so the flap moves in a controlled way within the 1500-3375 power factor range printed in the product description.
T-Slim lift-up flap fitting for fronts made from wood (inset) is designed for wooden inset fronts, so the hardware, milling depth, and kinematics suit solid or panel-based wood fronts in this configuration. This flush inset flap fitting for high design requirements & maximum storage space supports applications where the front must sit flush inside the frame, which is common in contemporary or handleless layouts that demand tight joints. The milling depth: cabinet side: 12.2 mm, front: 13.7 mm supports a concealed installation in the cabinet side and front, which keeps the hardware visually minimized while preserving interior volume. Cover caps and adapters in Stone, Ice, & Silver (all cover caps can be painted) offer color and finish options at the cover areas, which helps coordinate visible parts with the cabinet finish or integrate them into custom painted schemes.
Flap with 3-dimensional adjustment of height plus or minus 2.5 mm, side plus or minus 2.0 mm, depth +3.0 mm / -1.0 mm allows correction of gaps in three axes, which matters when aligning multiple inset fronts across a run of cabinets. Convenient adjustment of the spring force lets the installer adapt the Kinvaro T-Slim set to three different power factors, which supports tuning for various front sizes within the 1500-3375 power factor range. Low opening forces and multi-position stop work together with tuned spring force so the flap can hold at intermediate positions during use, which is helpful when users open to partial heights. Available in two versions: With integrated damping (Soft-close, damper can be switched on/off) and With integrated automatic opening system (Tipmatic Plus) means the same system supports either soft-close damping or an automatic opening system, which allows selecting the motion behavior that matches the cabinet design and user expectation.
The Kinvaro T-Slim lift-up flap fitting is for fronts made from wood (inset), which suits applications where the wooden front sits flush within the cabinet opening.
The milling depth cabinet side 12.2 mm and front 13.7 mm define how much material is machined away, positioning the fitting recessed for a slim, flush appearance.
The flap with 3-dimensional adjustment of height, side, and depth lets the installer fine-tune inset reveals after mounting, helping align the front with adjacent cabinetry.
Convenient adjustment of the spring force tailors lifting support to the front and power factor, improving how the flap opens, stays put, and closes in daily operation.
The 107 degree opening angle lets the flap swing well above horizontal, improving access to cabinet contents while keeping the motion within a defined arc.
The integrated opening angle reduction clip with optional activation to 75 degrees helps when overhead clearance or adjacent units limit how far the flap should open.
This Grass Kinvaro T-Slim set Soft-close Ice 1500-3375 power factor combines a T-Slim lift-up flap fitting for fronts made from wood (inset) with a flush inset flap fitting layout, supporting high design requirements & maximum storage space. The defined milling depth: cabinet side: 12.2 mm, front: 13.7 mm, three different power factors, and convenient adjustment of the spring force work together so installers can match the lift behavior to the specific front. Choosing this Ice version with compatible cover caps and adapters in Stone, Ice, & Silver (all cover caps can be painted) helps align visible parts with the overall cabinet color scheme on the project.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set |  GFF161149022204 Mfr# F161149022204 | Grass Kinvaro T-Slim Adapter Set Screw-On, Ice |