Shelf Standards, Infinite Adjustment Recess or Surface Mount - Rangine Corp Rakks SC-036C

Rakks SC-036C Shelf Standard For Flexible Shelving

Rakks SC-036C shelf standard is a low profile 36 inch C-standard designed for either surface mount or recessed applications, so one part number supports different wall conditions on the same job. The standard works with friction fit brackets that allow infinite adjustment, so shelf heights can be set exactly where needed rather than stepping in fixed slot increments. A patented Rakks locking system holds shelves at a precise location at any height, which helps maintain clean alignment across long runs. The standard is made from 6063-T6 extruded aluminum, so it pairs lightweight handling with structural rigidity during installation. Its clear anodized finish matches the clear anodized description, giving a neutral, project-friendly appearance. The section measures .700 inches wide by .535 inches deep, so designers and installers can plan reveals, clearances, and recess depths with predictable results.

Key Shelf Standard Details That Drive Job Results

• The low profile standard supports either surface mount or recessed applications, so the same part can be used where standards need to sit proud of the wall or drop into a routed or framed pocket for a more integrated look.
• Friction fit brackets provide infinite adjustment, so shelf positions are not locked to pre-punched slots and can be fine-tuned to match specific storage layouts or align with reveals on adjacent cabinetry.
• The patented Rakks locking system holds shelves at a precise location at any height, giving repeatable alignment from bay to bay and reducing the need for later tweaking when multiple standards support a continuous shelf run.
• Mounting is designed to fasten to studs or wall blocking at 16 to 32 inch spacing, so the system can tie directly into common residential and commercial stud layouts without redesigning backing patterns.
• The standard uses 6063-T6 extruded aluminum with a .700 inch width and .535 inch depth, which combines a compact profile with a known cross-section for planning clearances behind doors, panels, or closet components.
• The product is sustainably sourced and made in the USA, contributing to LEED ratings, so project teams working on green or certified buildings can document a shelving component that supports sustainability goals.

Mounting And Adjustment Details For Rakks SC-036C

The Rakks SC-036C shelf standard is intended to fasten to studs or wall blocking at 16 to 32 inch spacing, which aligns with typical framing modules and helps distribute shelf loads into the structure. Its ability to be used for either surface mount or recessed applications means the same standard can be laid out directly over drywall or set into a prepared recess, coordinating with millwork or wall systems. Friction fit brackets create infinite adjustment along the full length of the standard, so installers can slide bracket positions until shelves line up with doors, trim, or existing shelving. The patented Rakks locking system then secures the brackets and shelves at a precise location at any height, helping shelves stay on layout over time.

Using This Shelf Standard In Real Projects

Where The Rakks SC-036C Standard Fits Best

The Rakks SC-036C shelf standard belongs in shelf, closet, and garage organization projects, as identified by its category, so it suits storage runs in residential and commercial spaces. It is part of the Shelf Standards and Brackets product class, so it is intended to work as the vertical track in adjustable shelving assemblies. The low profile form factor fits applications where a clean, minimal vertical line is important, such as open closets, wall shelving, or exposed organizational systems. Because it can be used for surface mount or recessed installations, it adapts to both retrofit work over existing finishes and new builds where recesses can be framed or routed for a flush appearance.

Sustainably sourced, made in the USA construction that contributes to LEED ratings gives project teams a shelving component that supports environmental certification targets on commercial or institutional jobs. The 6063-T6 extruded aluminum body offers a combination of strength and relatively light weight, so long standards can be handled on site without heavy equipment while still delivering a rigid track for brackets. With dimensions of .700 inches wide by .535 inches deep, the profile occupies little wall projection, which is useful where aisle clearance, door swing, or adjacent cabinetry requires tight control of protrusions. The 36 inch length referenced in the description suits shorter bays, stacked layouts, or situations where standards must stop below obstructions like soffits while still providing full bracket adjustability.

Why These Mounting And Adjustment Details Matter

Using the SC-036C standard for either surface mount or recessed applications allows a single system to carry through an entire project, so different walls can share the same vertical hardware even when some need a flush architectural treatment and others do not. Fastening to studs or wall blocking at 16 to 32 inch spacing ties the load path directly into common framing layouts, which supports consistent bracket performance along the run of shelving. Friction fit brackets with infinite adjustment enable installers to place shelves at non-standard heights dictated by stored items or design drawings, rather than being forced into preset increments that might misalign with other built-ins.

The patented Rakks locking system that holds shelves at a precise location at any height minimizes vertical creep or drift, which helps banks of shelves stay on the same line across multiple standards and over time. The 6063-T6 aluminum construction with a .700 inch width and .535 inch depth results in a compact structural profile, so the standard can sit behind doors, sliding panels, or face frames while still leaving room for shelf material and hardware. The sustainably sourced, made in the USA status that contributes to LEED ratings gives specifiers a clearly documented shelf standard choice for projects where material origin and environmental performance are design requirements.

Common Questions About Rakks SC-036C Shelf Standards

Select Rakks SC-036C For Adjustable Shelving Runs

The Rakks SC-036C shelf standard combines a low profile 36 inch C-standard form, 6063-T6 extruded aluminum construction, and clear anodized finish into one adjustable shelving backbone. Its ability to handle surface mount or recessed applications, along with fastening to studs or wall blocking at 16 to 32 inch spacing, lets it line up with typical framing and architectural details. Friction fit brackets with infinite adjustment, locked by the patented Rakks system, support precise shelf placement at any height. For shelf, closet, and garage organization jobs that call for adjustable shelving with documented LEED-contributing hardware, this standard is designed to meet that role.