
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rakks SC-072C shelf standard is a low profile 72 inch aluminum standard that supports adjustable shelving runs in closets, storage, and organization projects. The standard works in either surface mount or recessed applications, so it fits projects where the standard needs to sit proud of the wall or flush inside a routed channel. Friction fit brackets engage directly with the standard, creating infinite adjustment rather than locking into pre-punched slots, which allows shelves to be set at any usable height. The patented Rakks locking system holds those friction fit brackets in precise locations, helping shelves stay where they are set once layout is established. The standard body is made from 6063-T6 extruded aluminum, providing a consistent profile shape along its length. The standard measures 0.700 inch wide by 0.535 inch deep, giving a compact footprint that stays visually light on finished wall surfaces.
The SC-072C standard is designed for either surface mount or recessed installation, giving flexibility in how it meets the finished wall plane. In surface mount applications, the 0.700 inch width and 0.535 inch depth sit directly on the face of the wall, so installers can align multiple standards along layout lines and then fasten into studs or blocking at 16 inch, 24 inch, or 32 inch spacing. In recessed applications, the same dimensions guide router or saw cuts so the aluminum body nests into the wall or casework. Because the standard accepts friction fit brackets with infinite adjustment, layout work focuses on getting the standards straight and properly spaced, then shelf heights can be tuned later without reworking the wall fastening pattern.
The 72 inch SC-072C shelf standard suits closet, garage, and general shelving projects that call for continuous height flexibility. Its low profile geometry, with a 0.700 inch wide by 0.535 inch deep section, keeps the vertical hardware discreet, which is useful on visible walls and in open storage areas. Because the standard can be surface mounted, it works on framed walls where the aluminum needs to sit over drywall and tie back into studs or blocking at 16 inch to 32 inch spacing. The same standard also works in recessed installations, letting it sit flush in millwork panels or custom alcoves so only the bracket arms project. Sustainably sourced and made in the USA, the standard contributes to LEED ratings, which is valuable on commercial or institutional projects where documentation of sustainably sourced hardware is part of the specification and submittal process.
The friction fit bracket interface on the SC-072C standard allows infinite adjustment along the full 72 inch length, so shelf heights can be matched to stored item sizes or design lines without stepping in fixed increments. That infinite adjustment capability is driven by the standard profile and the matching bracket design, and it matters when aligning shelves across long runs or around obstructions. The patented Rakks locking system then secures those friction fit brackets at the chosen locations, supporting precise placement that holds under typical loads. With 6063-T6 extruded aluminum forming the standard body, the profile stays consistent, which helps the friction fit engagement feel uniform as brackets are repositioned. The ability to fasten the standard to studs or blocking at spacings between 16 inch and 32 inch supports different framing layouts while keeping the locking and adjustment functions working the same from job to job.
The SC-072C standard is described as a 72 inch C-standard, which suits typical closet and storage wall heights where a single vertical member can support multiple shelf positions.
The SC-072C standard uses friction fit brackets that slide along the profile without preset slots, allowing shelf heights to be changed to any position along the length.
The SC-072C standard is designed for surface mount applications and fastens to studs or wall blocking, so it can be installed over drywall where framing is accessible.
The SC-072C standard is specified for recessed applications, so it can be set into routed or built-in channels when a flush appearance is needed in millwork.
The SC-072C uses 6063-T6 extruded aluminum, giving a consistent, straight profile that supports accurate alignment of multiple standards and smooth bracket adjustment.
The SC-072C is described as sustainably sourced and made in the USA, contributing to LEED ratings on projects where documented sustainable components are required.
The SC-072C low profile C-standard from Rangine Corp/Rakks pairs infinite adjustment friction fit brackets with a 72 inch 6063-T6 aluminum profile for precise shelving layouts. For projects needing surface mount or recessed adjustable shelving tied into studs or blocking at 16 inch to 32 inch spacing, this clear anodized standard supports clean lines, repeatable bracket engagement, and LEED-contributing documentation on closets, storage walls, and built-in installations.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Package | RNSS6-015-Z Mfr# SS6-015-Z | Rakks Shelf Standards Installation Screws- SS6-015-Z | ||||
Sold in: 1 Package | RNSS6-015-B Mfr# SS6-015-B | Rakks Shelf Standards Installation Screws- SS6-015-B | ||||
Sold in: 1 Package | RNSS6-015-W Mfr# SS6-015-W | Rakks Shelf Standards Installation Screws- SS6-015-W |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RNTB2-10C Mfr# TB2-10C | 10" T-Style Shelf Brackets Infinite Adjustment, 2" Deep, Anochrome | ||||
Sold in: 1 Each | RNTB2-10B Mfr# TB2-10B | 10" T-Style Shelf Brackets Infinite Adjustment, 2" Deep, Matte Black | ||||
Sold in: 1 Each | RNTB2-10W Mfr# TB2-10W | 10" T-Style Shelf Brackets Infinite Adjustment, 2" Deep, Gloss White | ||||
Sold in: 1 Each | RNTB2-12B Mfr# TB2-12B | 12" T-Style Shelf Brackets Infinite Adjustment, 2" Deep, Matte Black | ||||
Sold in: 1 Each | RNTB2-12W Mfr# TB2-12W | 12" T-Style Shelf Brackets Infinite Adjustment, 2" Deep, Gloss White | ||||
Sold in: 1 Each | RNTB2-12C Mfr# TB2-12C | 12" T-Style Shelf Brackets Infinite Adjustment, 2" Deep, Anochrome |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RNBR2-12B-RP Mfr# BR2-12B-RP | Rectangular Profile Shelf Brackets Infinite Adjustment - Rangine Corp Rakks BR2-12B-RP | ||||
Sold in: 1 Each | RNBR2-10W-RP Mfr# BR2-10W-RP | Rectangular Profile Shelf Brackets Infinite Adjustment - Rangine Corp Rakks BR2-10W-RP | ||||
Sold in: 1 Each | RNBR2-10C-RP Mfr# BR2-10C-RP | Rectangular Profile Shelf Brackets Infinite Adjustment - Rangine Corp Rakks BR2-10C-RP | ||||
Sold in: 1 Each | RNBR2-12W-RP Mfr# BR2-12W-RP | Rectangular Profile Shelf Brackets Infinite Adjustment - Rangine Corp Rakks BR2-12W-RP | ||||
Sold in: 1 Each | RNBR2-10B-RP Mfr# BR2-10B-RP | Rectangular Profile Shelf Brackets Infinite Adjustment - Rangine Corp Rakks BR2-10B-RP | ||||
Sold in: 1 Each | RNBR2-12C-RP Mfr# BR2-12C-RP | Rectangular Profile Shelf Brackets Infinite Adjustment - Rangine Corp Rakks BR2-12C-RP |