Shelf Standards, Infinite Adjustment Recess or Surface Mount - Rangine Corp Rakks SC-048C

Rakks SC-048C Shelf Standard For Flexible Shelving

Rakks SC-048C shelf standard uses a low profile design that supports either surface mount or recessed applications, so one profile can be used across different wall conditions on a project. Infinite adjustment with friction fit brackets eliminates fixed slot positions, which lets you set shelf elevations exactly where they are needed rather than jumping between preset increments. The patented Rakks locking system provides a positive lock at any height, helping shelves stay where they are set during everyday use. This SC-048C standard is made from 6063-T6 extruded aluminum, so the section delivers strength in a compact .700 inch wide by .535 inch deep profile that works well where space is tight along the wall face. Sustainably sourced, made in the USA construction contributes to LEED ratings, which matters on commercial or institutional jobs with documented environmental goals. The standard is fastened to studs or wall blocking at 16 inch to 32 inch spacing, aligning with common framing layouts.

Key Shelf Standard Details That Support The Job

• The low profile SC-048C standard works in either surface mount or recessed applications, so a single standard style can be carried onto walls that need a flush look or a face-mounted layout.
• Friction fit brackets allow infinite adjustment along the standard, which lets installers fine-tune shelf heights to clear plumbing, backsplashes, or existing millwork without being limited by slot spacing.
• The patented Rakks locking system holds brackets at the chosen height, so shelves stay at their set elevation when loaded or bumped in everyday use.
• Fastening at 16 inch to 32 inch stud or wall blocking spacing aligns with typical framing grids, simplifying layout and reducing layout time on new construction and retrofit walls.
• 6063-T6 extruded aluminum in a .700 inch wide by .535 inch deep profile provides strength in a compact section, which is useful where standards must share space with trim, casework ends, or narrow pilasters.
• Sustainably sourced, made in the USA construction contributes to LEED ratings, helping the standard support projects where documented material sourcing and environmental performance are part of the specification.

Mounting And Layout Details For Rakks SC-048C

The SC-048C surface mount or recessed capability gives flexibility at layout time, since the same standard can sit proud on the wall face or be set into a cutout for a flush appearance. Fastening to studs or wall blocking at 16 inch to 32 inch spacing matches common framing distances, helping align standards with structure while staying inside the recommended span. The .700 inch width and .535 inch depth of the 6063-T6 extruded aluminum section define the cutout size when recess mounting and the visible footprint when surface mounting, so installers can size trim, reveals, or panel edges to meet the metal cleanly.

How This Infinite Adjustment Shelf Standard Works On Site

Where The Rakks SC-048C Shelf Standard Fits Best

The SC-048C shelf standard belongs in shelf, closet, and garage organization work where standards and brackets handle the vertical support. Its low profile form leaves more visual and physical room around shelves, which helps in closets or wall systems that run close to doors and casework. Because it can function in either surface mount or recessed applications, the same standard can serve open garage walls, finished closets, and built-in shelving where a flush look is preferred. The ability to fasten to studs or wall blocking at 16 inch to 32 inch spacing matches typical wood or metal framing, so installers can position standards over solid structure in residential or commercial interiors. As part of a shelf standards and brackets class, the SC-048C forms the vertical element that receives friction fit brackets, carrying shelving loads back to the wall.

Why Infinite Adjustment And Locking Improve Shelf Results

Infinite adjustment from friction fit brackets means brackets can be placed anywhere along the SC-048C, allowing shelf heights to match specific storage needs or align with existing architectural lines. This avoids having to compromise around pre-punched slots, which is useful when tying shelves into window heads, soffits, or appliance clearances. The patented Rakks locking system secures the bracket position at any chosen height, which helps maintain consistent shelf lines across long runs even after loading and repeated use. The 6063-T6 extruded aluminum body resists deformation in a compact .700 inch wide by .535 inch deep profile, supporting straight, true alignment of multiple standards along a wall. Being sustainably sourced and made in the USA, while contributing to LEED ratings, allows the standard to be specified on projects that track environmental performance without changing installation practice or layout steps.

Common Questions About The SC-048C Shelf Standard

Select The SC-048C Standard For Adjustable Shelving Runs

The Rakks SC-048C shelf standard combines low profile 6063-T6 extruded aluminum construction with surface mount or recessed use, so it fits a range of shelf, closet, and garage organization layouts. Infinite adjustment with friction fit brackets and the patented Rakks locking system supports precise, repeatable shelf heights across a project. Mounting to studs or wall blocking at 16 inch to 32 inch spacing matches common framing, which streamlines layout. For projects that value LEED contributions and made in the USA sourcing, the SC-048C standard provides adjustable shelving support that aligns with both performance and documentation needs.