
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rakks SC-048B shelf standard provides a low profile support track that works in either surface mount or recessed applications, so installers can use one part across different wall conditions without changing layout methods. The standard uses friction fit brackets that allow infinite adjustment instead of fixed slots, giving precise shelf positioning without being locked to preset increments. A patented Rakks locking system holds brackets at the chosen height, letting shelves stay exactly where they are set during loading and everyday use. The SC-048B is identified as a 48 inch C-standard in a black finish, so it suits installations calling for a dark, unobtrusive support line along the wall. Dimensions of 0.700 inch width by 0.535 inch depth keep the standard compact against the wall, which helps when working near trim, cabinet sides, or tight closet returns.
The SC-048B standard fastens to studs or wall blocking at 16 to 32 inch spacing, letting installers pattern standards along typical framing grids for consistent load transfer. Because it can be used in both surface mount and recessed installations, the same component supports open shelf walls and more finished, flush conditions without changing hardware families. Friction fit brackets with infinite adjustment interact with the standard so shelf heights can be nudged up or down as field dimensions and user preferences evolve. The patented Rakks locking system then secures each bracket position, helping maintain joint alignment between multiple shelves while the system is in everyday service.
The SC-048B is a 48 inch C-standard in black, which suits many shelf, closet, and garage organization layouts covered by shelf brackets and standards systems. Its low profile geometry of 0.700 inch wide by 0.535 inch deep allows use where a slimmer standard line is preferred, such as along finished closet walls, built-in shelving, or narrow vertical reveals beside cabinets. Because the standard works for either surface mount or recessed applications, it adapts to walls where the track remains visible and to situations where it is set into the wall depth for a more integrated look. Fastening into studs or wall blocking at 16 to 32 inch spacing fits common framing practices, so installers can run multiple standards on typical stud walls without reworking the structural layout.
Friction fit brackets that allow infinite adjustment mean the SC-048B does not rely on discrete slots, so shelves can be placed at any height along the run rather than at fixed increments. On site, this helps when aligning shelves with existing lines, coordinating with door heads, or matching the top of adjacent cabinetry. The patented Rakks locking system then holds the brackets at that chosen height, limiting movement once loading starts and helping shelves stay level across multiple standards. The ability to fasten into studs or wall blocking at 16 to 32 inch spacing ties the standard into established framing, which supports consistent performance across bays. The low profile section keeps the support track visually minimal while still providing a defined mounting path for friction fit brackets, which is useful in both residential closets and higher-visibility shelving runs.
The SC-048B is a 48 inch C-standard shelf standard in black, so it serves as the vertical track that supports compatible brackets in shelf, closet, and garage organization projects.
The friction fit brackets provide infinite adjustment along the SC-048B, allowing shelf heights to be set at any point on the standard to match site-specific dimensions or desired clearances.
The SC-048B standard fastens to studs or wall blocking at 16 to 32 inch spacing, aligning with typical framing patterns used in many residential and commercial walls.
The SC-048B can be used for either surface mount or recessed applications, so it works on exposed wall faces or in built-out conditions where the track is set into the wall depth.
The SC-048B uses 6063-T6 extruded aluminum, giving a rigid but relatively lightweight standard that is practical to handle and align during installation on longer wall runs.
The patented Rakks locking system on the SC-048B holds friction fit brackets at the precise chosen height, supporting level shelves and helping reduce movement in everyday use.
The Rakks SC-048B shelf standard combines a low profile 0.700 inch by 0.535 inch aluminum section with infinite adjustment friction fit brackets, giving flexibility for shelf height layout. Surface or recessed mounting options and fastening to studs or wall blocking at 16 to 32 inch spacing align this 48 inch C-standard with typical framing and finish approaches. Selecting this black Rakks SC-048B standard supports precise shelf placement across closet, garage, and general shelving projects where fine vertical adjustment and a clean track profile are priorities.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RNBR2-12W-RP Mfr# BR2-12W-RP | Rectangular Profile Shelf Brackets Infinite Adjustment - Rangine Corp Rakks BR2-12W-RP | ||||
Sold in: 1 Each | RNBR2-12B-RP Mfr# BR2-12B-RP | Rectangular Profile Shelf Brackets Infinite Adjustment - Rangine Corp Rakks BR2-12B-RP | ||||
Sold in: 1 Each | RNBR2-10C-RP Mfr# BR2-10C-RP | Rectangular Profile Shelf Brackets Infinite Adjustment - Rangine Corp Rakks BR2-10C-RP | ||||
Sold in: 1 Each | RNBR2-10W-RP Mfr# BR2-10W-RP | Rectangular Profile Shelf Brackets Infinite Adjustment - Rangine Corp Rakks BR2-10W-RP | ||||
Sold in: 1 Each | RNBR2-12C-RP Mfr# BR2-12C-RP | Rectangular Profile Shelf Brackets Infinite Adjustment - Rangine Corp Rakks BR2-12C-RP | ||||
Sold in: 1 Each | RNBR2-10B-RP Mfr# BR2-10B-RP | Rectangular Profile Shelf Brackets Infinite Adjustment - Rangine Corp Rakks BR2-10B-RP |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Package | RNSS6-015-Z Mfr# SS6-015-Z | Rakks Shelf Standards Installation Screws- SS6-015-Z | ||||
Sold in: 1 Package | RNSS6-015-B Mfr# SS6-015-B | Rakks Shelf Standards Installation Screws- SS6-015-B | ||||
Sold in: 1 Package | RNSS6-015-W Mfr# SS6-015-W | Rakks Shelf Standards Installation Screws- SS6-015-W |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RNTB2-12W Mfr# TB2-12W | 12" T-Style Shelf Brackets Infinite Adjustment, 2" Deep, Gloss White | ||||
Sold in: 1 Each | RNTB2-12B Mfr# TB2-12B | 12" T-Style Shelf Brackets Infinite Adjustment, 2" Deep, Matte Black | ||||
Sold in: 1 Each | RNTB2-10C Mfr# TB2-10C | 10" T-Style Shelf Brackets Infinite Adjustment, 2" Deep, Anochrome | ||||
Sold in: 1 Each | RNTB2-10W Mfr# TB2-10W | 10" T-Style Shelf Brackets Infinite Adjustment, 2" Deep, Gloss White | ||||
Sold in: 1 Each | RNTB2-10B Mfr# TB2-10B | 10" T-Style Shelf Brackets Infinite Adjustment, 2" Deep, Matte Black | ||||
Sold in: 1 Each | RNTB2-12C Mfr# TB2-12C | 12" T-Style Shelf Brackets Infinite Adjustment, 2" Deep, Anochrome |