Amerock Calathea Pull 32mm For Cabinet Projects

Amerock Calathea pull 32mm gives you a 1-1/4 in (32 mm) center-to-center handle that sets hole spacing for consistent cabinet layouts. That fixed 32 mm measurement helps align multiple doors and drawers on a run so fronts stay visually straight. The pull is part of Amerock Corporation's Calathea collection, so its pattern matches other pieces from the same series for coordinated jobs. A satin nickel finish creates a neutral metallic tone that blends with many hinge finishes on cabinets. The pull uses a zinc material body, which provides a solid metal feel for daily gripping on doors and drawers. A length of 1-15/16 in defines the overall size of the pull, giving a compact footprint on narrow rails. A projection of 1-1/8 in sets how far the pull stands off the surface, creating finger clearance for opening.

Key Calathea Pull Details For Daily Use

• The Calathea collection's textured surface introduces a patterned grip area, helping fingers catch the pull quickly on frequently used cabinet doors and drawers.
• The satin nickel finish offers a smooth metallic surface that is simple to wipe down, keeping decorative hardware looking consistent across the installation.
• The zinc material construction delivers a single-piece metal pull that handles repeated opening and closing in kitchen, bath, or shop cabinetry.
• The 1-1/4 in (32 mm) center-to-center dimension defines drill point spacing, supporting repeatable boring setups on cabinet rails and drawer fronts.
• The 1-15/16 in length and 1-15/16 in width establish the pull's footprint, helping position it correctly on narrower stiles or drawer fronts without crowding edges.

Calathea Satin Nickel Pull Fit And Mounting

This Amerock Calathea satin nickel pull uses a 1-1/4 in (32 mm) center-to-center layout, giving a clear distance between mounting points for cabinet drilling jigs. That fixed spacing suits linear runs where consistent handle placement matters from door to door. A projection of 1-1/8 in provides stand-off from the cabinet face so fingers can wrap around the pull when opening heavier drawers. The pull width of 1-15/16 in defines how much space it covers across the door or drawer face, guiding where to position it relative to panel edges and rails. A base length of 1-9/16 in and base width of 5/16 in describe the contact area against the surface, which helps plan for flat mounting spots on profiled doors. The 8-32 x 1-1/2 in screw size matches standard cabinet boring for threaded fasteners.

Using This Calathea Cabinet Pull On Projects

Where The Amerock Calathea Pull Works Best

The Calathea cabinet pull 32mm belongs to the Decorative Hardware & Moldings category under Handles and Pulls, placing it in the typical role of a cabinet handle for doors and drawers. Its compact 1-15/16 in length suits smaller cabinet faces where a larger pull might crowd neighboring fronts. The Amerock Calathea collection's textured surface brings visual depth to flat-panel cabinets, adding interest to simple door styles. The satin nickel finish coordinates with many commonly used satin nickel hinges in shop and residential cabinet work. A width of 1-15/16 in allows centered placement on narrower drawer fronts without overlapping edge profiles. The pull's 1-1/8 in projection offers enough space behind the handle for gripping, which is useful on heavier storage drawers in kitchens or work areas.

Details That Support Repeatable Cabinet Results

The 1-1/4 in (32 mm) center-to-center measurement on this Amerock 32mm center to center pull sets an exact drilling distance, supporting use with 32 mm system layouts and jigs for repeatable boring. That consistency reduces layout variation when installing multiple pulls across a bank of cabinets. The base length of 1-9/16 in creates a defined landing area, helping align the pull to reference marks on rails or stiles so handles sit level. A base width of 5/16 in limits how much flat surface is required, making the pull workable on doors with narrow framing. The 8-32 x 1-1/2 in screw size specifies the threaded connection, matching a common machine screw standard used in many cabinet shops. The satin nickel finish and zinc material provide a solid-feeling surface for repeated daily use on active kitchens or shop cabinets.

Common Questions About The Calathea Satin Nickel Pull

Selecting This Calathea Pull For Cabinet Work

The Amerock Calathea Series 1-1/4 in (32 mm) center-to-center satin nickel pull BP10132G10 combines a defined 32 mm mounting layout with a textured Calathea collection surface. For cabinet runs that call for consistent drilling and a compact zinc pull footprint, this model offers clear dimensions and finish details to match project plans.