Amerock Calathea Series 1-1/4 in (32 mm) Center to Center Polished Chrome Pull, -BP1013226

Amerock Calathea 32mm Pull For Cabinets

Amerock Calathea 32mm pull is a zinc cabinet pull in the Calathea collection with a polished chrome finish, so it delivers a bright metallic look on cabinet doors and drawers. The Calathea collection is inspired by natural botanical patterns, giving this pull a unique textured surface that adds visual depth to the front of a cabinet. The pull has a 1-1/4 inch (32 mm) center-to-center dimension, which sets a consistent handle spacing for layout across multiple doors. Its overall length of 1-15/16 inch keeps the footprint compact, which works well on smaller fronts or tight installations. A projection of 1-1/8 inch provides finger clearance between the cabinet face and the pull, supporting a comfortable grip when opening and closing. The polished chrome finish and defined Calathea texture pair to create a precise, modern accent on decorative hardware projects.

Key Calathea Pull Details For Cabinet Work

• The Calathea collection design is inspired by natural botanical patterns, so the pull face has a distinctive texture that adds depth and shadow to cabinet surfaces during everyday use.
• Zinc construction gives the pull a solid, consistent base material, which supports uniform machining of the Calathea pattern across multiple pieces in the same project run.
• The polished chrome finish creates a reflective surface, helping the pull stand out as decorative hardware against painted or stained cabinet faces.
• A 1-1/4 inch (32 mm) center-to-center size sets a defined mounting layout, which simplifies drilling and alignment when repeating this pull on doors and drawers.
• The 1-15/16 inch overall length keeps the pull compact, which is useful where space around the hardware is limited or where a smaller scale is preferred.
• A 1-1/8 inch projection moves the gripping surface away from the cabinet face, providing working clearance for fingers when pulling the door or drawer.

Mounting Dimensions And Calathea Pull Fit

The Calathea pull uses a 1-1/4 inch (32 mm) center-to-center mounting dimension, so the two mounting points are set to this fixed spacing for drilling. A base length of 1-9/16 inch defines the footprint that contacts the cabinet face, helping plan where the pull lands on narrower rails or stiles. The base width of 5/16 inch outlines the front-to-back contact strip, which informs edge clearances and layout around panel details. With an overall length of 1-15/16 inch, the pull occupies a modest horizontal span, which fits well on small drawers or compact doors. The 1-1/8 inch projection defines how far the pull stands off the front, giving a clear measure of working clearance when planning door swing near adjacent surfaces.

Using The Amerock BP1013226 Pull In Projects

Where This Calathea Cabinet Pull Works Best

The Amerock Calathea BP1013226 pull belongs to the Calathea collection, so its textured, botanical-inspired surface visually matches other Calathea pieces in the same line. Its 1-1/4 inch (32 mm) center-to-center size suits cabinet doors and drawers designed around this common small-pull spacing. The compact 1-15/16 inch length lets the pull sit comfortably on narrow drawer fronts, slim rails, or smaller bath and utility cabinets. A 1-9/16 inch base length provides a stable contact area on the face, which is helpful on slender framing members. The 5/16 inch base width focuses that support into a narrow band, fitting near panel edges or decorative profiles. With a polished chrome finish, the pull provides a bright accent that can coordinate with other polished chrome decorative cabinet hardware across a room or bank of cabinets.

Details That Support Consistent Cabinet Layout

The defined 32 mm center-to-center spacing on this Amerock Calathea 32mm pull gives a precise drilling layout for repeated installations across multiple fronts. The 8-32 screw size specification sets the threaded interface, aligning with standard cabinet pull mounting practice for this style. A projection of 1-1/8 inch sets the working stand-off from the cabinet face, creating predictable finger clearance when laying out pulls near adjacent walls or appliances. The 1-15/16 inch overall length combined with the 1-9/16 inch base length helps visualize how much of the pull is visible beyond the mounting footprint, supporting consistent visual alignment from piece to piece. Zinc material and the defined Calathea texture allow the pull face to present the same pattern from unit to unit, which matters when multiple pulls are viewed together on a larger run of cabinetry.

Common Questions About The Calathea 32mm Pull

Select This Calathea Pull For Defined Layout

The Amerock Calathea Series 1-1/4 inch (32 mm) center-to-center polished chrome pull combines a textured botanical-inspired design with compact dimensions that suit smaller cabinet fronts. With defined length, projection, and base measurements, it supports consistent layouts across doors and drawers. The zinc construction and polished chrome finish present a coordinated decorative hardware option for projects using Calathea collection pieces. Choose this Amerock BP1013226 pull when a 32 mm center-to-center layout and a bright, patterned pull face align with your cabinet design plan.