Olympus Disc Tumbler Cam Lock For Cabinet Use

Olympus disc tumbler cam lock with a 1-7/16 inch cylinder keyed alike 415 provides a single key pattern across multiple lock points, which simplifies access control on jobs where several drawers or doors share the same keying. The bright nickel finish presents a clean, neutral appearance that works with a wide range of cabinet hardware finishes in commercial or shop-built casework. This cam lock has passed the ANSI/BHMA Grade 2 cycle test at 20,000 cycles including key insertion and removal, so it supports repeat daily locking and unlocking in typical cabinet use. The lock is shipped with the cylinder and body assembled via a patented retainer staple, which reduces assembly time during installation and supports consistent alignment between the cylinder and cam body on the bench or at the jobsite.

Key Cam Lock Details That Support Daily Use

• The ANSI/BHMA Grade 2 cycle test rating at 20,000 cycles covering key insertion and removal means the lock is designed to handle repeated operation in regularly accessed drawers or doors, which matters in office, institutional, or shop environments.
• The patented retainer staple that holds the cylinder and body assembled reduces handling steps during installation, which helps installers move quickly from drilling and boring operations straight to mounting without separate cylinder seating.
• The spur washer with an eyelet that is screwed into place prevents lock rotation and keeps the fixing nut from loosening after installation, which helps locks remain correctly oriented in wood panels or casework over time under repeated use.
• The 90 degree cam turn provides a clear, predictable throw of the cam between locked and unlocked positions, which simplifies layout of strike points on cabinet frames or mating parts.
• The key being removable in both locked and unlocked positions allows users to remove the key after securing or accessing a compartment, which can streamline workflows where the same key operates multiple locks in sequence.

Cam Lock Installation And Construction Options

This Olympus disc tumbler cam lock is intended for drawers and for right-hand or left-hand doors, which supports consistent hardware choices across different cabinet orientations on the same project. It can be used in lipped or overlay construction with a 1-1/2 inch straight cam, which suits applications where the door overlays the frame. It can also be used in flush construction with a 1-1/8 inch extension, 11/32 inch offset cam, fitting applications where the door or drawer front sits flush with the cabinet face. For overlay use, the combined thickness of the front and frame cannot exceed the cylinder length listed, which ties the hardware selection directly to panel build-ups and face material choices.

How This Cam Lock Works In Real Projects

Where This Cam Lock Fits Drawers And Doors

This cam lock is specified for drawers and for right-hand or left-hand doors, so the same locking hardware can be applied across a full run of casework with varying configurations. The lipped or overlay construction option using a 1-1/2 inch straight cam lets the cam reach behind an overlay door or drawer front to engage cabinet framing, which helps maintain secure closure on face-frame or overlay-style cabinetry. For flush construction, the 1-1/8 inch extension with an 11/32 inch offset cam positions the cam correctly relative to a flush front and mating strike location, which helps maintain consistent cam engagement when fronts are in the same plane as the cabinet sides. The requirement that the combined thickness of front and frame stay within the cylinder length means the lock body sits properly through the boring and front material without excess projection, which supports a clean appearance on the finished surface and proper thread engagement for the fixing nut.

Design Details That Support Flexible Keying And Setup

The cylinder and body are shipped assembled with a patented retainer staple, so installers handle a single assembled unit when fitting the lock into the prepared hole, which can reduce time spent aligning the cylinder with the body during large runs of cabinets. The revolutionary cylinder plus cylinder extender design allows cylinders to be easily swapped between different size cam lock bodies, giving flexibility when matching cylinder lengths to varying front and frame thicknesses while keeping the same key system. The keyed alike 415 configuration allows multiple locks to share the same key, which simplifies key management on installations where one user or group operates several compartments. The spur washer with an eyelet is designed to be screwed into place so that it bites into the substrate, resisting rotation of the lock body under torque on the key and helping the fixing nut stay tight throughout repeated operations. The key being removable in both locked and unlocked positions supports workflows where the key holder moves between stations, using the same key to service multiple locks on cabinets, drawers, and doors equipped with this cam lock style.

Common Questions About Olympus Cam Lock Use

Selecting This Cam Lock For Your Next Build

The Olympus disc tumbler cam lock with a 1-7/16 inch cylinder keyed alike 415, bright nickel finish, and ANSI/BHMA Grade 2 20,000-cycle test performance aligns well with drawer and door applications that see regular use. Its support for drawers, right-hand doors, and left-hand doors, along with options for lipped, overlay, and flush construction, allows one lock family to cover varied cabinet designs. The assembled cylinder and body, spur washer with eyelet, and cylinder plus cylinder extender design all focus on installation efficiency and adaptable keying. For projects needing consistent cam lock function and shared keying across multiple openings, this Olympus cam lock offers a compact, job-ready solution.