Olympus Disc Tumbler Cam Lock For Cabinets

Olympus disc tumbler cam lock is a cam lock for drawers and right-hand or left-hand doors, so one part number can secure multiple cabinet layouts on a project. The bright nickel finish provides a clean, professional look that works well in visible cabinet locations. The lock is keyed alike 420, which means multiple locks can be operated by the same key for simplified key management across a room or job. The cylinder length is 1-7/16 inches, giving reach for common cabinet front and frame combinations in the stated applications. The lock passed the ANSI/BHMA Grade 2 cycle test with 20,000 cycles, including key insertion and removal, so it is designed to handle frequent daily use in normal cabinet environments. Custom keying typically ships direct from the manufacturer in 48-72 hours, which supports project timelines that need specific keying patterns.

Key Functional Details That Support Cabinet Work

• Lock comes assembled, which saves bench time because the cylinder and body are already put together when the lock is put into service.
• The cylinder and body are assembled via a patented retainer staple, so the core is held in position during handling and mounting, reducing the chance of parts separating on the job.
• The lock is shipped with cylinder and body assembled, which allows installers to move directly to door or drawer preparation instead of pre-assembling lock components.
• The spur washer with eyelet, when screwed into place, prevents lock rotation and keeps the fixing nut from loosening after installation, so the lock stays correctly oriented in the panel over time.
• The revolutionary cylinder and cylinder extender design allows cylinders to be swapped between different size cam lock bodies, giving inventory and keying flexibility across various cabinet thicknesses and layouts.
• A 90 degree cam turn provides a clear open-and-close action, making it straightforward to align cams with strikes or frames during installation and later adjustment.

Cam Lock Mounting, Turn, And Construction Fit

The lock provides a 90 degree cam turn, so the cam moves from locked to unlocked with a quarter turn that is easy to align with catches or frames. It is designed for drawers and both right-hand and left-hand doors, which supports consistent hardware selection across mixed cabinet runs. The lock works with lipped or overlay construction using a 1-1/2 inch straight cam, letting the cam reach behind the overlay to engage the frame. For flush construction, it uses a 1-1/8 inch extension, 11/32 inch offset cam, which positions the cam to properly engage material that is even with the frame face. For overlay applications, the combined thickness of front and frame cannot exceed the cylinder length listed, so the specified cylinder dimension guides material stack-up choices.

Where This Olympus Cam Lock Fits Best

Use On Drawers, Doors, And Cabinet Fronts

This Olympus disc tumbler cam lock is specified for drawers and for right-hand or left-hand doors, so one locking format can be used across pull-out and hinged access points in the same installation. The keyed alike 420 configuration means multiple locations on a bank of cabinets can share a single key code, simplifying access for staff who need to open several compartments regularly. The lipped or overlay construction option, using the 1-1/2 inch straight cam, allows the cam to reach past the door or drawer front to grab the frame, which is important when working with overlay faces. For flush construction, the 1-1/8 inch extension and 11/32 inch offset cam bring the cam into the correct plane to engage mating hardware on a flush front, keeping the lock action consistent across different cabinet styles.

Details That Support Reliable Operation And Keying

The lock passed the ANSI/BHMA Grade 2 cycle test at 20,000 cycles, including key insertion and removal, which shows the mechanism is designed for repeated daily locking and unlocking without excessive wear in typical cabinetry use. Key removable in both locked and unlocked positions allows the key to be taken out after locking or after opening, giving flexibility in how keys are handled during normal operations. The spur washer with eyelet, when screwed into place, stops the lock body from rotating in the hole and holds the fixing nut against loosening, which maintains cam alignment to the strike over time. The revolutionary cylinder plus cylinder extender system lets cylinders move between different size cam lock bodies, so a single key system can be maintained while adapting to different door and drawer thicknesses. Custom keying typically ships direct from the manufacturer in 48-72 hours, which helps coordinate keying schedules with cabinet fabrication and installation work.

Common Questions About Olympus Disc Tumbler Cam Lock

Selecting This Cam Lock For Your Project

This Olympus disc tumbler cam lock with bright nickel finish, keyed alike 420, and 1-7/16 inch cylinder length brings a tested ANSI/BHMA Grade 2 solution to drawers and both right-hand and left-hand doors. The combination of 90 degree cam turn, options for lipped or overlay and flush construction, and the cylinder plus extender system supports consistent keying across varied cabinet designs. For cabinet, casework, or furniture projects needing a cam-style lock with these specific dimensions and functions, this model from Olympus Lock, Inc. is a focused choice.