Olympus Disc Tumbler Cam Lock, 1-7/16" Cylinder Keyed Alike 452 Bright Nickel 955-14A-C452A

Olympus Disc Tumbler Cam Lock For Cabinets

Olympus disc tumbler cam lock gives drawers and cabinet doors a keyed security point using a 1-7/16 inch cylinder, so casework shares a consistent lock body where this size is required. The lock is keyed alike 452, which keeps multiple units on the same key number when a project needs shared access. Bright nickel finish provides a neutral, professional look that works across typical shop and millwork color schemes. The lock comes assembled with the cylinder and body joined by a patented retainer staple, which keeps the core seated and ready for mounting. This lock passed the ANSI/BHMA Grade 2 cycle test at 20,000 cycles including key insertion and removal, so the mechanism is built for repeated daily operation. A 90 degree cam turn gives a familiar quarter-turn motion that engages or releases the cam in a straightforward way during normal use.

Cam Lock Details That Support Daily Use

• The lock comes assembled with cylinder and body connected via a patented retainer staple, which saves assembly time and keeps components aligned when installing into prepared panels or drawer fronts.
• Passing the ANSI/BHMA Grade 2 cycle test at 20,000 cycles including key insertion and removal confirms the cam and core are built to handle frequent locking and unlocking in typical cabinet or fixture environments.
• The design uses a revolutionary cylinder plus cylinder extender system, allowing cylinders to be swapped between different size cam lock bodies, which supports flexible keying plans and reduces the number of distinct lock bodies a shop needs to keep on hand.
• The lock uses a 90 degree cam turn, so a simple quarter-turn motion operates the mechanism, which keeps user operation intuitive for drawers and doors already laid out for this rotation.
• The lock is keyed alike 452, so multiple locks with this key number can be operated with the same key, which streamlines access control where several drawers or doors share one user group.
• Custom keying typically ships direct from the manufacturer in 48-72 hours, which supports projects that need specific key codes or keying patterns while keeping lead times predictable for scheduling.

Installation Fit For Overlay And Flush Cabinets

The Olympus disc tumbler cam lock is specified for drawers and right-hand or left-hand doors, so a single lock style can be used across different swing directions on a project. It is suitable for lipped or overlay construction using a 1-1/2 inch straight cam, which allows the cam to bridge past a face frame or lip during locking. For flush construction, the lock uses a 1-1/8 inch extension cam with 11/32 inch offset, positioning the cam to catch the frame or strike in a flush-front layout. For overlay applications, the combined thickness of front and frame cannot exceed the listed cylinder length, which keeps the key plug accessible while allowing the cam to reach the strike surface. A spur washer with eyelet is part of the design, and when this washer is screwed into place it resists lock body rotation and helps the fixing nut stay tight over time.

How This Cam Lock Works In Cabinet Projects

Using The Lock On Drawers And Doors

This Olympus disc tumbler cam lock is described for drawers and for right-hand or left-hand doors, so it can be specified across a run of casework with different layouts while keeping one lock style. The 90 degree cam turn gives a direct quarter-turn action, so the cam rotates from open to locked without over-travel, which helps when clearances are tight behind the panel. In lipped or overlay construction, the 1-1/2 inch straight cam reaches over the cabinet front and engages behind the frame, helping keep the front closed when locked. For flush construction, the 1-1/8 inch extension cam with 11/32 inch offset is used to reach and catch the mating surface while the front remains even with the cabinet sides. Because the lock is keyed alike 452, multiple drawers or doors on the same job can be operated with a single key pattern where that key number is chosen.

Details That Help With Keying And Service

The lock passed an ANSI/BHMA Grade 2 cycle test at 20,000 cycles including key insertion and removal, which means the keyway and cam interface were tested for repeated use, supporting longer service life in busy environments. The bright nickel finish provides a consistent, metallic appearance that coordinates with many hinge and knob finishes, helping hardware sets look unified. A spur washer with eyelet is part of the installation layout, and when this washer is screwed down it bites into the mounting surface to help prevent the lock case from spinning as the key is turned, which reduces the chance of misalignment over time. The revolutionary cylinder plus cylinder extender system lets the same cylinder design be swapped into different size cam lock bodies, which allows a shop to extend an existing key system into new cabinet thicknesses without changing the keyway. Custom keying typically ships direct from the manufacturer in 48-72 hours, which supports projects needing tailored key codes or specific keying systems on a defined schedule.

Common Questions About This Olympus Cam Lock

Selecting This Cam Lock For Your Next Build

The Olympus disc tumbler cam lock with 1-7/16 inch cylinder, keyed alike 452, bright nickel finish, and 90 degree cam turn offers a defined setup for drawers and cabinet doors. With tested ANSI/BHMA Grade 2 cycle performance and hardware for both overlay and flush constructions, it provides a consistent way to add key control across a project. Matching this lock to your drawer and door layouts allows you to standardize on one cam lock family while using the straight or offset cams as described.