Sliding Door Track Assembly No. 15, 3' Length Oil Rubbed Bronze

Sliding Door Track Assembly No. 15 For Glass

Sliding Door Track Assembly No. 15 sets up a complete sliding system for 1/4 inch thick glass doors, so installers get a matched track, roller, and guide layout designed to work together on a single project. The aluminum 3 ft long track base creates the main running surface, giving you a defined path for the sliding panels over a compact opening. Oil rubbed bronze finish on the visible hardware ties the system into darker door and cabinet layouts where exposed metal needs a warmer tone. The upper guide components control the top of the glass, keeping panels in line while they travel. Matching shoes at the bottom secure the glass to the rollers, translating door movement smoothly along the aluminum track. The dedicated single track pieces support a straightforward two-panel alignment, which helps maintain consistent gaps where a simple bypass action is required.

Key Sliding Door Track Details For Installers

• The 3 ft long aluminum track base and single track lengths provide a defined run for short sliding glass openings, which suits smaller cabinet-style or display door spans where full-height door gear is not required.
• Design for 1/4 inch thick glass doors standardizes the glazing setup, so glass thickness, shoes, and vinyl work together without shimming for routine projects using this common panel size.
• The oil rubbed bronze finish on the sliding door hardware components supports jobs where the visible metal must coordinate with bronze hinges, pulls, or frames on built-ins or furniture pieces.
• Dedicated rollers matched to the track help the doors travel in a controlled path, which limits side play and supports repeatable sliding action on installations that are opened frequently.
• Clip guides interact with the glass edges and track layout to keep panels aligned, which reduces racking as doors move and helps maintain consistent reveals at the front of the opening.
• Glazing vinyl designed for 1/4 inch glass seats the panels within the shoes, so the interface between glass and metal remains stable during mounting and repeated sliding cycles.

Sliding Track Installation And Glass Door Fit

The 3 ft aluminum track base positions the running gear along the bottom of the opening, giving installers a fixed reference line when aligning the two single track pieces for parallel travel. Because the assembly is engineered for 1/4 inch thick glass doors, the glazing vinyl and shoes establish a snug channel for the glass edge, which removes guesswork from the interface between panel and hardware. The upper guide matches this geometry, keeping the top of the door in line with the bottom track so the glass runs square to the opening. Clips act along the door edges, stabilizing each panel as it slides, which supports even motion without binding at either end. The dedicated rollers carry the glass weight along the single track, allowing the doors to shift smoothly within the set 3 ft span once they are positioned.

Using EPCO No. 15 Track In Real Projects

Where This Sliding Door Track Assembly Fits Best

The EPCO Sliding Door Track Assembly No. 15 in a 3 ft length works on shorter openings that call for 1/4 inch thick glass panels, such as upper display cabinets or small room dividers using sliding glass. The aluminum base and single track sections provide a compact footprint, which suits furniture-grade or casework applications where a narrow sill detail is preferred over bulky floor hardware. Oil rubbed bronze treatment on the exposed sliding door hardware elements lets this assembly blend into projects that already feature bronze-finished pulls, knobs, or frame profiles. The matched upper guide and clip guides keep tall glass segments steady even in a relatively short width, maintaining clean alignment across the front of the unit when doors are parked. This focused geometry gives shop teams and field installers a predictable hardware set whenever a small-span glass slider layout is specified.

Why The No. 15 Components Support Repeatable Results

The defined combination of upper guide, shoes, single track sections, track base, rollers, clip guides, and glazing vinyl means each sliding glass project using this assembly follows the same component layout, which simplifies both shop prep and on-site installation steps. Designing the system for 1/4 inch glass doors lets fabricators standardize panel thickness, edge treatments, and vinyl selection, so glass arrives ready to interface with the shoes and guides without extra fitting. The aluminum 3 ft long base and track pieces give installers a consistent cut length, reducing layout variation across a run of similar cabinets or displays. Oil rubbed bronze finish adds visual consistency when multiple units share one room, so hardware appearance stays uniform from cabinet to cabinet. The rollers and clip guides work together to keep glass moving on a stable path, which helps reduce readjustment over time when doors are cycled often.

Common Questions About EPCO No. 15 Track Assembly

Select This No. 15 Track For 1/4 Inch Glass Runs

The EPCO Sliding Door Track Assembly No. 15, 3 ft length, brings together aluminum track, rollers, guides, shoes, glazing vinyl, and an oil rubbed bronze look for 1/4 inch glass doors on compact spans. For projects using short glass sliders in cabinets or similar openings, this defined component set delivers a consistent path, controlled movement, and a coordinated bronze-finished appearance across the whole run.