Sliding Door Track Assembly No. 15, 4' Length Oil Rubbed Bronze

Sliding Door Track Assembly No. 15 For Glass Doors

Sliding Door Track Assembly No. 15 defines this EPCO system as a coordinated sliding track solution designed specifically for 1/4 inch thick glass doors. The aluminum construction in a 4 ft length provides a straight, rigid path for smooth horizontal movement, which helps keep small cabinet or display doors running reliably over time. The oil rubbed bronze finish ties the functional track into darker design schemes, so the hardware supports the visual style instead of fighting it. Because the system is purpose-built around 1/4 inch glass, installers can work knowing the clearances and components are matched to that glass thickness, reducing trial-and-error on site. The defined 4 ft length gives a predictable layout dimension for planning openings and cut sizes, especially when repeating the same configuration across multiple cabinets or cases.

Key Sliding Track Components That Support Door Motion

• The 730 upper guide stabilizes the top of the 1/4 inch glass door, helping the panel track in line and reducing side-to-side wander during use, which supports consistent sliding action.
• The two 743 shoes support the glass at the bottom interface, creating a defined contact point between the panel and track so the door seats correctly and travels predictably along the slide path.
• The two 726 single tracks create the lower running surfaces that guide the glass doors, giving installers clear lanes for each panel to move without interference.
• The 730 track base anchors and locates the running assembly, tying the lower tracks together so the door motion stays aligned with the opening and cabinet structure.
• The four 752 rollers carry the moving load of the glass doors along the tracks, reducing sliding resistance so doors start and stop smoothly in regular operation.
• The four 771 clip guides help keep the glass edges positioned relative to the track, which supports straight travel and helps the doors return to the same alignment every time.

Installation Details For 1/4 Inch Glass Sliding Doors

This EPCO aluminum track system is engineered for 1/4 inch thick glass doors, so every contact point from shoes to guides is dimensioned for that glass thickness, simplifying layout when cutting and edging panels. The specified 4 ft length sets the maximum run for the sliding opening, helping installers size cases and door panels to match the track span. For glass height, the requirement to deduct 1-7/16 inch from the opening height gives a clear sizing rule, so the glass panels have working clearance within the assembled track and guides. Glazing vinyl is part of the system intent, serving to cushion and grip the glass where it seats into the hardware interfaces, which supports stable door retention under everyday movement.

How This EPCO Track Assembly Works In Use

Sliding Door Track Assembly No. 15 In Cabinets

The EPCO Sliding Door Track Assembly No. 15 is structured around coordinated parts so 1/4 inch glass doors move in defined paths across a 4 ft span. The 726 single tracks form parallel lanes for each door, allowing one panel to pass behind the other inside cabinet or showcase openings. The 730 upper guide and 771 clip guides work together to control the upper edges of the glass, which keeps the panels upright and steady as users open and close them repeatedly. The 743 shoes and glazing vinyl interface the lower glass edges with the metal track, creating a cushioned seating that helps the glass rest securely while still sliding with low effort. The oil rubbed bronze finish presents a dark, muted tone, which lets the track assembly coordinate with casework and hardware using similar finishes in the same installation.

Component Design That Supports Consistent Sliding Motion

The 752 rollers, used in a set of four, distribute the moving load of the glass doors across the length of the aluminum track, which helps the system deliver smooth motion along the entire 4 ft run. Because the 730 track base provides a fixed platform for the lower 726 single tracks, the roller path stays straight, supporting predictable door travel with reduced binding. The defined glass height deduction of 1-7/16 inch from the opening height gives a working gap for the doors within the guide and roller system, which helps prevent the glass from dragging at the head or sill during operation. Matching elements such as the upper guide, shoes, and clip guides to 1/4 inch thick glass keeps the contact geometry consistent from top to bottom, so both doors respond similarly when users slide them from either side. The combined aluminum build and coordinated EPCO components create a unified sliding hardware set that supports repeatable performance across multiple identical cabinet or display installs.

Common Questions About This EPCO Sliding Track

Select This Track Assembly For 1/4 Inch Glass Runs

The EPCO Sliding Door Track Assembly No. 15 in a 4 ft aluminum length with oil rubbed bronze finish offers a coordinated set of guides, rollers, tracks, and glazing vinyl dedicated to 1/4 inch thick glass doors. The defined glass height deduction of 1-7/16 inch from opening height supplies a direct sizing rule for door panels, which supports efficient layout when building multiple units. Using the 15-ORB-4 assembly aligns the hardware choice with a known EPCO configuration so sliding glass doors move on a matched system from upper guide to lower track.