Sliding Door Track Assembly No. 16, 3' Length Satin Clear Anodized

Sliding Door Track Assembly No. 16 For Glass

Sliding Door Track Assembly No. 16 sets up a sliding system for 1/4 inch thick glass doors, so you can build or repair light-duty sliding glass openings with known hardware geometry. The EPCO 3 ft long aluminum track establishes a fixed run length, which suits smaller cabinet or casework spans. The satin clear anodized finish on the aluminum track provides a clean, neutral appearance that blends into most shop-built fixtures. The 723 double track defines two parallel sliding paths, so paired glass doors can bypass each other smoothly in a shallow cabinet face. The 710-A track base supports the double track, creating a stable mounting surface along the cabinet or case opening. The 732 upper guide controls the top of the glass, helping the door travel straight without racking under normal use.

Key Sliding Door Track Details For Installers

• The design for 1/4 inch thick glass doors sets a clear glazing thickness target, which simplifies glass selection when building new sliding fronts or matching existing doors.
• The aluminum 3 ft long track length defines the maximum single-run coverage, which fits many cabinet-width openings without field splicing or extra layout steps.
• The satin clear anodized aluminum surface resists normal handling marks, which helps finished fixtures maintain a consistent appearance in visible applications.
• The 723 double track configuration creates two door channels, which lets one glass door pass in front of the other to open either side of a cabinet.
• The 732 upper guide, 743 shoes, 752 rollers, and 771 clip guides work together to locate the glass at top and bottom, which supports smooth sliding along the prescribed path.

Sliding Track Fit, Glass Height, And Mounting

The design for 1/4 inch thick glass doors fixes the groove and hardware layout around a precise glass thickness, which reduces play in the opening and supports consistent sliding feel. The instruction to deduct 1-7/16 inch from the opening height to determine glass height ties door size directly to the installed track geometry, so the finished doors clear the track hardware while staying tight to the opening. The 710-A track base provides the lower mounting surface for the 723 double track, giving you a defined install plane along the cabinet or case bottom. The presence of mounting screws in the system allows direct fastening of these components, which helps hold the track alignment across the 3 ft run.

How This EPCO Sliding Track Works In Practice

Sliding Door Track Assembly No. 16 In Use

The EPCO Sliding Door Track Assembly No. 16 for 1/4 inch thick glass doors creates a guided path at both top and bottom of the opening, so glass panels travel in a straight, repeatable line. The 723 double track establishes two channels at the bottom, allowing a left and right door leaf to slide past each other across the 3 ft span. The 743 shoes locate on the glass at the lower edge, so the 752 rollers can carry the door weight along the double track. The 771 clip guides add lateral guidance, which keeps doors from wandering out of the rolling path during normal operation. At the top, the 732 upper guide keeps the door edge captured, so vertical and lateral forces transfer into the frame instead of flexing the glass. The glazing vinyl cushions the interface between the 1/4 inch thick glass and the hardware contact areas, which helps the door sit securely while it moves along the tracks.

Details That Support Consistent Sliding Performance

The dedicated design for 1/4 inch thick glass doors standardizes all gripping, guiding, and rolling components around one glass thickness, which supports a uniform fit across both leaves. The 3 ft long aluminum track run simplifies layout on shorter cabinets, because the installer works with a single known length instead of multiple segments. The satin clear anodized aluminum finish provides a smooth bearing surface along the 723 double track, which helps the 752 rollers move with less resistance during everyday use. The 710-A track base positions the double track at a consistent height, so the glass height deduction of 1-7/16 inch reliably yields doors that align with the opening while clearing hardware. The combination of 743 shoes, 771 clip guides, and glazing vinyl holds the glass securely inside the sliding system, which supports repeatable movement without excessive side play over the working life of the opening.

Common Questions About This Glass Door Track

Select This Track Assembly For Glass Projects

The EPCO Sliding Door Track Assembly No. 16 for 1/4 inch thick glass doors combines a 3 ft long aluminum track, double track layout, and matched guides to build controlled sliding movement into smaller openings. The prescribed glass height deduction of 1-7/16 inch ties your door sizing directly to the system geometry, supporting clean alignment once installed. For cabinet or casework projects that call for 1/4 inch thick sliding glass, this satin clear anodized assembly provides a defined method to support, guide, and roll the doors across the opening.