Sliding Door Track Assembly No. 16, 6' Length Satin Clear Anodized

Sliding Door Track Assembly No. 16 For Glass

Sliding Door Track Assembly No. 16 is an EPCO aluminum sliding door hardware set designed for 1/4 inch thick glass doors, so it gives a defined fit when you are building or upgrading sliding glass fronts. The 6 ft long aluminum track provides a continuous running surface, which helps span typical cabinet or casework openings without splicing. The satin clear anodized finish on the aluminum gives a clean appearance that blends with most shop-built fixtures while resisting surface wear during regular door movement. The assembly is identified by manufacturer part number 16-A-6, making it straightforward to match this specific configuration in drawings or reorder lists. This sliding door hardware sits in the Builders Hardware and Sliding Door Hardware category, so it aligns with common casework, display, and cabinet applications that rely on smooth glass door travel.

Key Sliding Door Hardware Details That Matter

• For 1/4 inch thick glass doors, the shoes and guides are sized to grip and track this glass thickness, which supports consistent alignment along the full 6 ft opening.
• The 6 ft long aluminum construction provides a single continuous length, helping reduce transitions that can cause door hang-ups along the travel path.
• The satin clear anodized finish on the aluminum track presents a neutral appearance that works well in visible display areas while standing up to routine sliding use.
• The EPCO brand and 16-A-6 part number tie this assembly to a defined sliding door hardware system, which supports repeatable selection across multiple similar installations.
• The Builders Hardware and Sliding Door Hardware classification places this product in a familiar group for cabinet and fixture projects, simplifying planning around glass door layouts.

Installation Dimensions And Glass Height Calculation

This sliding door track assembly for 1/4 inch thick glass doors specifies that glass height is calculated by deducting 1-7/16 inches from the opening height, so you get a direct dimension to cut glass for proper fit within the track system. The 6 ft long aluminum track and base give a defined span to work from when laying out your opening, which supports predictable clearances between the upper guide and lower running components. With a set glass height deduction and a known track length, the assembly provides fixed reference points that help keep fabrication, ordering, and on-site fitting aligned.

Using This EPCO Sliding Track In Projects

Where This Sliding Door Track Assembly Fits Best

This EPCO Sliding Door Track Assembly No. 16 is designed for 1/4 inch thick glass doors, so it fits projects where that glass thickness is already part of the specification, such as display cases, cabinet fronts, or similar casework. The 6 ft long aluminum layout gives room to span wider openings, which is useful for multi-door glass runs in commercial or shop-built fixtures. Because the assembly is categorized as Sliding Door Hardware within Builders Hardware, it aligns naturally with woodworking and fixture work where sliding glass access is preferred over hinged doors. The satin clear anodized finish supports use in applications where the track remains visible, such as retail displays or office millwork. With a defined glass height deduction of 1-7/16 inches from opening height, it fits workflows that rely on clear numerical rules for cutting and ordering glass panels to sit correctly in the system.

Details That Help Achieve Consistent Sliding Performance

The sliding door track assembly is built around aluminum components in a 6 ft length, which provides a straight, rigid running surface that supports smooth door movement across typical cabinet spans. Its design for 1/4 inch thick glass doors ties the shoes, guides, and rollers to a single glass thickness, which helps keep the door centered in the track and reduces side play. The specified 1-7/16 inch deduction from opening height for the glass height gives a repeatable formula, so each panel works consistently with the upper guide and lower running gear once installed. The satin clear anodized finish contributes a stable surface on the aluminum, supporting ongoing sliding contact without affecting the look of the exposed track. With EPCO branding and the 16-A-6 part number, the assembly can be matched across multiple cabinets or replacement projects, helping maintain uniform sliding behavior wherever this system is used.

Common Questions About Track No. 16 Sliding Use

Select Sliding Door Track Assembly No. 16 For Your Build

Choose Sliding Door Track Assembly No. 16 when your project calls for 1/4 inch thick glass doors over a 6 ft span, so the door components, guides, and calculations align with a single, defined system. The satin clear anodized aluminum construction and clear 1-7/16 inch glass height deduction from opening height give solid reference points for layout, fabrication, and installation on cabinet or display work. Using the EPCO 16-A-6 assembly as specified helps keep multiple openings consistent across a job where identical sliding glass door performance and appearance are required.