Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sliding Door Track Assembly No. 16 is an EPCO sliding door hardware assembly designed for 1/4 inch thick glass doors, so it targets standard glass thickness many shops already use in display or cabinet applications. The aluminum construction in a satin clear anodized finish provides a clean, neutral look that works well with typical interior hardware palettes, while the anodized surface supports consistent appearance over time. The 4 ft long track assembly suits common cabinet and casework openings, allowing straight, continuous support for the glass doors across the span. EPCO part 16-A-4 identifies this as the specific No. 16 assembly, helping match it to drawings, takeoffs, or replacement needs where that system is already specified. As sliding door hardware within builders hardware and sliding door hardware categories, it fits directly into woodworking and casework workflows where compact sliding glass fronts are required.
This aluminum sliding door track assembly is designed around 1/4 inch thick glass doors, which helps installers work from a fixed glass thickness when laying out channels and clearances. The 4 ft long track length provides a single continuous run that simplifies layout along the cabinet or case top and bottom. As a sliding door hardware assembly, it is structured for doors to ride within the aluminum track components, which helps guide movement along a defined path. The EPCO No. 16 designation and 16-A-4 part number provide a clear reference when aligning field installation with shop drawings or prior installations using the same system. Being categorized as builders hardware and sliding door hardware places it directly in the workflow of millwork and casework installation, where predictable track geometry is important for consistent door travel.
This sliding door track assembly is built for 1/4 inch thick glass doors, so it aligns with glass commonly used in cabinet doors, display cases, and similar millwork. The 4 ft long aluminum track allows it to span many standard cabinet or counter lengths in one piece, which is useful in store fixtures or residential casework where smooth sliding action across the full opening is needed. As EPCO sliding door hardware in the builders hardware category, it is oriented toward woodworking, cabinetry, and related trades that install sliding glass fronts on built-in or fabricated units. The satin clear anodized aluminum finish keeps the track visually understated, which is often preferred in retail, office, or residential installations where the focus is on the displayed contents or surrounding millwork.
The No. 16 designation tied to EPCO part 16-A-4 identifies a specific sliding door track assembly, which benefits repeat work where matching track geometry and operation from job to job is important. Designing the system for 1/4 inch thick glass doors keeps the interface between glass and track predictable, which supports uniform clearances and smoother door travel when fabrication follows that thickness. The 4 ft long aluminum track section reduces joints in the sliding path over typical cabinet spans, which can help maintain even rolling or gliding across the entire opening. The satin clear anodized finish on the aluminum provides a consistent surface along the track contact areas, supporting reliable movement while maintaining a neutral appearance against varied cabinet colors and materials in woodworking projects.
The Sliding Door Track Assembly No. 16 is designed for 1/4 inch thick glass doors, so glass selection and door fabrication can follow that fixed thickness specification.
The EPCO Sliding Door Track Assembly No. 16 is 4 ft long, providing a continuous section suited to many cabinet and display case widths without cutting multiple shorter pieces.
The Sliding Door Track Assembly No. 16 uses aluminum with a satin clear anodized finish, giving a neutral metallic look that coordinates with varied interior hardware schemes.
The EPCO No. 16 assembly is intended for 1/4 inch thick glass doors, aligning it with sliding glass fronts on cabinets, displays, and similar millwork projects.
This EPCO part 16-A-4 is classified under builders hardware and sliding door hardware, placing it within typical woodworking and cabinet hardware schedules.
The 16-A-4 part number designates EPCO Sliding Door Track Assembly No. 16 in a 4 ft aluminum, satin clear anodized configuration for 1/4 inch glass doors.
The EPCO Sliding Door Track Assembly No. 16 in 4 ft length offers an aluminum, satin clear anodized solution specifically for 1/4 inch thick glass doors. With its defined 16-A-4 part designation and builders hardware classification, it fits neatly into woodworking, cabinet, and display projects needing a compact sliding glass door system. For projects where a known No. 16 sliding door hardware layout is required, this assembly provides a clearly specified track option that aligns with standard glass thickness and common cabinet spans.
Sold In: 1 Each
