Sliding Door Track Assembly No. 16, 5' Length Satin Clear Anodized
Description
Sliding Door Track Assembly No. 16 For Glass Doors
Sliding Door Track Assembly No. 16 is an EPCO aluminum sliding door hardware set designed for 1/4 inch thick glass doors, so it gives shops a defined track solution for light sliding glass panels. The 5 foot long aluminum construction provides a continuous running surface across typical cabinet or casework spans, which supports smooth door travel on smaller installations. The satin clear anodized finish on the track presents a neutral appearance that works in visible cabinetry while protecting the aluminum surface in day-to-day use. The assembly is built around EPCO component No. 16-A-5, aligning glass door movement to a known part number and configuration that installers can specify consistently. By matching door thickness and length in a single assembly, this track setup helps fabricators standardize a sliding detail across multiple projects without piecing together individual parts.
Key Sliding Track Details That Support Workflow
- The aluminum 5 foot length supplies a single, continuous track run for shorter glass door openings, which reduces layout breaks when routing or mounting into cabinets or display cases.
- The satin clear anodized finish on the track creates a clean, neutral appearance along the door opening while adding surface protection where doors contact and roll.
- Design for 1/4 inch thick glass doors ensures the contact points along the assembly match the glass size, which helps the panels seat correctly and move without excess play.
- The EPCO No. 16-A-5 designation ties the track assembly to a defined component set, which simplifies reordering and spec matching across similar sliding glass door jobs.
Sliding Door Track Mounting And Door Fit Considerations
The Sliding Door Track Assembly No. 16 uses an aluminum track layout sized around 1/4 inch thick glass doors, so glass selection and edge preparation can follow that fixed dimension. The 5 foot length allows the track to span many cabinet or casework openings in a single piece, which simplifies aligning the running surface during mounting. The satin clear anodized aluminum finish supports mounting into visible furniture or display work where exposed hardware needs a consistent look. Because this assembly carries the 16-A-5 designation from EPCO, shops can align door openings and glass sizing to a known track profile for repeat work.
How This EPCO Track Assembly Works In Practice
Sliding Door Track Assembly No. 16 Use In Glass Openings
This EPCO Sliding Door Track Assembly No. 16 is specified for 1/4 inch thick glass doors, so it fits jobs where glass panels are the primary door material rather than wood. The 5 foot aluminum track length supports smaller sliding glass door spans commonly found in cabinets, display cases, or built-ins, letting the installer run one continuous track rather than splicing shorter pieces. The satin clear anodized finish provides a neutral, low-visual rail along the opening, which suits projects where the glass and interior contents are the main focus. Because the assembly is part of EPCO sliding door hardware in the sliding door hardware product class, it is geared toward builders hardware applications where a defined sliding path is needed for glass doors.
Details That Support Repeatable Sliding Door Performance
The focus on 1/4 inch thick glass doors means the Sliding Door Track Assembly No. 16 centers its clearances and support around a specific glass thickness, helping reduce misalignment between panel and track in repeat work. The 5 foot aluminum construction keeps the running surface straight over the full opening, which supports consistent movement each time the door slides. The satin clear anodized finish on the aluminum track helps the contact surface stay uniform under normal cabinet use, which matters where rollers or guides move along the rail over time. Tying the assembly to EPCO part number 16-A-5 lets shops repeat the same track profile and setup across multiple projects, so opening sizes and glass panel cutting can follow the same hardware standard on every job.
Common Questions About EPCO Sliding Door Track Assembly
What door material and thickness does this track support?
The Sliding Door Track Assembly No. 16 is designed for 1/4 inch thick glass doors, so the track and related contact points are set up around that glass thickness.
How long is the EPCO Sliding Door Track Assembly No. 16?
The assembly uses a 5 foot long aluminum track, allowing it to span many cabinet or display openings with a single continuous sliding surface.
What finish does the aluminum track provide on the installation?
The track has a satin clear anodized finish, giving a neutral look along the opening while protecting the aluminum where the sliding door components contact it.
How does the EPCO part number 16-A-5 help on projects?
EPCO part number 16-A-5 identifies this specific Sliding Door Track Assembly No. 16, so shops can standardize on the same track profile and reorder accurately.
Where is this sliding track assembly typically used?
The assembly fits 1/4 inch thick glass doors in cabinet and display-style openings, giving a defined sliding path for glass panels in builders hardware applications.
What role does the aluminum construction play in use?
The aluminum construction provides a rigid, continuous track surface over the 5 foot length, supporting smooth glass door travel in the sliding hardware setup.
Select This Track Assembly For Glass Door Projects
The Sliding Door Track Assembly No. 16 from EPCO combines a 5 foot aluminum track length, satin clear anodized finish, and sizing for 1/4 inch thick glass doors, giving shops a defined sliding solution for cabinet and display openings. By working with the EPCO 16-A-5 configuration, installers can align repeated glass door projects to a consistent track profile and finish. For builders and woodworking professionals setting up sliding glass door hardware in smaller openings, this assembly offers a clear, part-numbered path to specifying the track side of the job.