
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Plastic Track for 1/2" Door Gray is a high impact, extruded polystyrene sliding door track designed for 1/2 inch by-passing wood doors, so it gives those doors a guided path for smooth movement across an opening. Because it is made from high impact, extruded polystyrene, the track provides a rigid, molded channel that supports repeated door travel in normal woodworking environments. The 12 FT length allows a single continuous run across wider openings, which reduces joint transitions that can interrupt door travel. Its 1.344 inch width is sized to work as a stable base profile for this track design, helping the door glide path stay consistent along the full run. The gray color gives a neutral appearance along the door underside, which helps the track blend into typical cabinet or opening finishes in shops and installations.
This EPCO plastic door track is configured for 1/2 inch by-passing wood doors, so it supports layouts where one door moves in front of another on a shared opening. The 12 FT long profile lets an installer run the track continuously across the span, which simplifies laying out the door centers and overlap along the entire opening. With a 1.344 inch width, the track body provides a defined base area that works with the specified glide and guide components, helping maintain a straight line for the door travel. Being part of sliding door hardware, this track acts as one element in a top-and-bottom guided system, so it contributes to the overall door motion when paired with the appropriate guides.
This EPCO plastic track is specified for use with Nylon Button Glide #33, so that glide rides in the molded channel to support the lower edge of the door. By matching the track to Nylon Button Glide #33, the door sits on a contact surface designed for this profile, which helps the sliding motion stay consistent along the entire 12 FT length. The track is also specified for use with Plastic Upper Guide #2212, so the door edges are guided at the top while the lower nylon button travels in the track. Using the track with Plastic Upper Guide #2212 gives the door a coordinated top-and-bottom control path, which helps keep 1/2 inch by-passing wood doors running parallel in the opening.
The high impact, extruded polystyrene material used for this EPCO track creates a uniform internal surface for Nylon Button Glide #33, so the glide encounters the same contact conditions along the full run. That uniform surface helps reduce changes in resistance as the door moves, which contributes to a more predictable sliding feel across the opening. The 12 FT length limits the need for joints in the glide path, which reduces points where the nylon button might transition between segments. With a 1.344 inch wide profile tied to the specified glide and guide components, the geometry supports a repeatable relationship between the lower track and Plastic Upper Guide #2212, which helps keep the doors aligned during repeated cycles in cabinet and opening installations.
This EPCO plastic track is for 1/2 inch by-passing wood doors, so it supports door pairs that slide past one another across the same opening.
Plastic Track for 1/2" Door Gray is 12 FT long, so it can span wider openings in one continuous run without segment joints in the glide path.
This EPCO plastic track is for use with Nylon Button Glide #33, so that specific glide shape rides in the track channel for supporting the sliding door.
The EPCO track is specified for use with Plastic Upper Guide #2212, so the upper guide and lower track work together to control the bypassing doors.
The EPCO 212-G plastic track uses high impact, extruded polystyrene, so the track body provides a molded profile suited to repeated door gliding contact.
The EPCO Plastic Track for 1/2" Door Gray is 1.344 inches wide, so it offers a defined base profile for the specified glide and guide components.
The EPCO Plastic Track for 1/2" Door Gray combines a 12 FT length, 1.344 inch width, and high impact, extruded polystyrene construction to support 1/2 inch by-passing wood doors. When used with Nylon Button Glide #33 and Plastic Upper Guide #2212, it provides a coordinated path for the door edges along the full opening. For sliding door hardware projects matching these dimensions and components, this EPCO 212-G track from Wurth Baer Supply aligns the lower guide path with the intended bypassing door layout.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | EPC033 Mfr# 33 | Nylon Button Glide | ||||
Sold in: 1 Each | EPC2212G Mfr# 2212-G | Plastic Upper Guide for 1/2" Door Gray |