Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1/4 x 48 sliding track from EPCO provides a guided path for by-passing wood and/or glass doors that are 1/4 inch thick, so small or light doors move in a controlled line instead of wandering or binding. The 4 ft length spans typical small openings in cabinets or similar projects, letting you run paired doors across the full width without splicing shorter sections. The track is designed for by-passing door layouts, which allows one 1/4 inch door to slide cleanly past another to open access without swinging space. This sliding door hardware is part of EPCO Builders Hardware, so it suits shop-built or on-site woodworking where consistent door action matters. The track is identified as Plastic Track #214, giving an exact part reference when matching to existing EPCO sliding assemblies or planning repeat jobs.
This EPCO sliding door hardware is specified for 1/4 inch by-passing wood and/or glass doors, so its channel size and profile relate directly to that door thickness for proper engagement. The 4 ft long Plastic Track #214 gives a continuous running surface, helping small and/or light doors stay aligned as they slide across the full opening. High impact, extruded polystyrene construction keeps the track profile consistent along its length, which supports repeatable fit when installing multiple door sets using the same track style.
This EPCO 1/4 x 48 sliding track is designed for 1/4 inch by-passing wood and/or glass doors, so its geometry is matched to that door thickness for predictable running clearance. By specifying 1/4 inch doors, the track supports light construction, making it suited to small and/or light doors rather than heavier panels. The track functions within a by-passing configuration, allowing one door to move in front of another door on the same opening, which is useful when a swing door would conflict with nearby fixtures or limited floor space. Because it is categorized as sliding door hardware under builders hardware, it aligns with cabinetmakers and installers who integrate sliding access into casework or shallow openings where 1/4 inch panels are common.
The EPCO Plastic Track #214 is paired with a Plastic Upper Guide #2214, so the door system has a defined track and a coordinated upper guide to stabilize the 1/4 inch by-passing doors during travel. High impact, extruded polystyrene gives the track body a resilient, molded profile, supporting repeated sliding of small and/or light doors without the channel deforming in typical use. The 4 ft long track length allows doors to move across a practical cabinet or opening span in a single run, avoiding interruptions in guidance over that distance. As part of EPCO sliding door hardware, the track and guide combination creates a matched path and upper control point so doors remain guided both at the track and at the top engagement.
This EPCO sliding track is specified for 1/4 inch by-passing wood and/or glass doors, so it is intended to guide panels built to that thickness for proper fit in the track channel.
The EPCO Plastic Track #214 is 4 ft long, providing a continuous sliding surface that supports by-passing movement across typical small openings or cabinet spans without joints between shorter pieces.
The sliding door track uses high impact, extruded polystyrene, which forms a shaped channel that maintains its profile for guiding small and/or light doors in standard sliding applications.
The EPCO track is recommended for small and/or light doors, aligning its high impact polystyrene construction and 1/4 inch door specification with lighter sliding panel designs.
This sliding track is described for 1/4 inch by-passing wood and/or glass doors, so it supports either material as long as the door thickness matches the 1/4 inch specification.
The Plastic Upper Guide #2214 works with the Plastic Track #214 to stabilize 1/4 inch by-passing doors from above, helping keep small and/or light doors aligned during sliding movement.
The EPCO 1/4 x 48 sliding track, with Plastic Track #214 and Plastic Upper Guide #2214, suits projects using 1/4 inch by-passing wood and/or glass doors over a 4 ft span. Its high impact, extruded polystyrene construction is recommended for small and/or light doors, fitting cabinets or similar openings where this door type is specified. For sliding door hardware within EPCO Builders Hardware, this track arrangement supports straightforward planning of 1/4 inch by-passing door runs.
Sold In: 1 Each
