Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1/4 x 72 sliding track from EPCO is a black-finish sliding door track assembly designed for 1/4 inch by-passing wood and/or glass doors, so it supports light door applications where two doors slide past each other instead of swinging into the room. The track is classified as sliding door hardware in the builders hardware category, which positions it for cabinetry, small closets, or similar installations that need compact door movement. Its 6 FT Long dimension gives enough travel for many standard cabinet or light door openings while remaining easy to handle in the shop. The track assembly is identified by manufacturer part 3-BL-6, helping installers match specifications across drawings and orders. This EPCO track solution supports smooth by-passing motion on correctly sized doors, keeping openings clear without taking up extra floor space.
This EPCO sliding door hardware uses a plastic track identified as Plastic Track #214, which provides the running surface for the doors in a by-passing configuration and sets the path the doors follow. The kit also uses a Plastic Upper Guide #2214, which supports the tops of the 1/4 inch doors and stabilizes their motion as they move along the track. By pairing the upper guide with the track, the assembly keeps small and/or light wood and/or glass doors aligned during operation. The 6 FT Long track length allows positioning across a typical light-door opening so the doors can fully cover and clear the span as they slide. With its high impact, extruded polystyrene construction, the track components stay dimensionally consistent for guiding the doors along a predictable route.
This plastic sliding track kit, described as PLAS TRK KIT NO.3 FOR 1/4IN DR,6FT L,BLK, is tailored to 1/4 inch by-passing wood and/or glass doors, so it fits situations where thin door panels need to slide instead of swing. The design is recommended for small and/or light doors, which aligns it with cabinetry, light closet fronts, or other modest-size openings where heavy-duty door gear is unnecessary. Its 6 FT Long length helps span many common openings in woodworking and light construction without joints in the track run, giving doors a continuous travel path. Because the material is high impact, extruded polystyrene, the track is suited to repeated sliding in everyday use on properly sized doors. The black finish supports both residential and shop projects where a dark track is preferred behind the door edges.
The high impact, extruded polystyrene construction of the EPCO Plastic Track #214 provides a rigid yet resilient base that carries 1/4 inch by-passing doors, which helps sustain smooth motion when doors are opened and closed repeatedly. The Plastic Upper Guide #2214 holds the top of the doors in place as they slide, which limits side play and keeps the door edges tracking along the intended line. Together, the guide and track support controlled movement of small and/or light wood and/or glass doors, reducing the tendency for panels to wobble in the opening. The defined 72 inch length lets installers coordinate door sizing and opening width around a known dimension, which simplifies layout across multiple similar openings in a project. Within the builders hardware and sliding door hardware categories, this kit fills the role of a complete path and upper control solution for 1/4 inch by-passing doors.
This EPCO track is described as PLAS TRK KIT NO.3 FOR 1/4IN DR, so it is intended for 1/4 inch doors, which aligns with slim wood and/or glass by-passing panels.
This sliding track is recommended for small and/or light doors, making it appropriate where slim wood and/or glass panels do not need heavy-duty hardware.
The EPCO sliding track is 6 FT Long, or 72 inches, so it spans many common light-door openings with a single continuous track section.
The track components are made from high impact, extruded polystyrene, providing a durable plastic body that supports repeated sliding of small and/or light doors.
Plastic Upper Guide #2214 helps guide the tops of 1/4 inch doors as they slide, stabilizing wood and/or glass panels along the track path.
Plastic Track #214 serves as the running surface for the sliding doors, providing the main path for 1/4 inch by-passing wood and/or glass panels.
This EPCO 1/4 x 72 sliding track, in black finish, combines Plastic Track #214 with Plastic Upper Guide #2214 to support 1/4 inch by-passing wood and/or glass doors in small and/or light-duty applications. With its 6 FT Long length and high impact, extruded polystyrene construction, it supplies a defined, continuous path that suits many cabinet or light door openings. For projects calling for sliding door hardware in the builders hardware category, this track kit aligns door thickness, material, and motion into a coordinated solution ready for integration into your layout.
Sold In: 1 Each
