Plastic Door Track Assembly No. 3 for 1/4" Door 3' L, Brown

Plastic Door Track Assembly No. 3 For 1/4 Inch Doors

Plastic door track assembly no. 3 is an EPCO sliding door hardware set designed for 1/4 inch bypassing wood and/or glass doors, so it fits common small panel materials used in light sliding door applications. The assembly is categorized as sliding door hardware, so it is aimed at door projects that need smooth horizontal movement instead of hinged operation. The track length is 3 ft, giving you a defined span to plan your opening width and overlap for two bypassing doors without guesswork. The track and guide are brown, so the hardware visually blends with similar toned casework where exposed edges or profiles would otherwise stand out. The assembly is intended for small and/or light doors, which aligns the material choice and dimensions with lighter duty sliding fronts on cabinets or similar installations where compact movement is preferred.

Key Details That Support Sliding Door Projects

• The EPCO brand and sliding door hardware classification connect this assembly to established builders hardware, so it fits directly into woodworking or cabinet workflows that already rely on that product class.
• Design for 1/4 inch bypassing wood and/or glass doors means one hardware solution can serve both substrates, so shops can standardize on a single track detail for mixed material fronts.
• The high impact extruded polystyrene construction provides a plastic track and guide body suited to small and/or light doors, so it offers a non-metal option where quieter contact and reduced marring of wood or glass edges matter.
• The specified 3 ft length lets you match the track span to modest openings, so cutting, layout, and door sizing for a two-panel bypass arrangement can be planned around a known dimension.
• The brown color identified in the product name ties the visible components to darker casework finishes, so the track zone can recess visually instead of creating a contrasting line above or below the doors.

Sliding Door Track And Guide Setup Details

This sliding door hardware uses a plastic upper guide and plastic track combination, so the 1/4 inch bypassing door edges contact a uniform extruded polystyrene surface across the span. The 3 ft track length defines the maximum door travel, so door widths and overlap can be laid out to keep both wood and glass doors running within the profile. The focus on small and/or light doors directs this assembly toward compact fronts, so weight expectations stay aligned with the material and profile size during layout. The brown finish noted in the name gives a consistent look between the track and guide, so the installed hardware reads as one element along the top edge. The EPCO identification and sliding door hardware classification align it with standard builders hardware practice, so it fits naturally into established cabinet and light sliding door planning.

Using This EPCO Track Assembly In Real Projects

Where This Plastic Door Track Assembly Works

This EPCO plastic door track assembly no. 3 is specified for 1/4 inch bypassing wood and/or glass doors, so it serves cabinets or similar openings that use thin panels for sliding fronts. The classification under sliding door hardware places it in builders hardware for horizontal movement, so it is suited to light-duty bypass applications where two doors share the same opening and slide past each other. The 3 ft length concentrates its use on smaller spans, so it aligns with upper cabinets, display cases, or other compact runs where long architectural tracks are not required. The description calling it recommended for small and/or light doors keeps its role focused on lighter panels, so it fits well with thin glass or lightweight wood that benefit from a softer plastic contact surface during operation.

Details That Support Consistent Sliding Door Results

The combination of plastic upper guide #2214 and plastic track #214 defines a matched guiding system, so the 1/4 inch bypassing doors interface with components designed to work together along the entire 3 ft length. High impact extruded polystyrene construction gives the track and guide a consistent molded profile, so the bearing surfaces that contact wood and glass edges remain uniform from end to end. The 3 ft brown track length is clearly specified, so layout of door width, overlap, and travel can be coordinated around a fixed span without recalculating different stock sizes. The recommendation for small and/or light doors aligns material strength and profile size with the door mass, so movement stays within the expected performance range of this sliding door hardware. Identifying the manufacturer part as 3-BR-3 provides an exact reference, so matching additional assemblies to existing installations or drawings uses the same track and guide specification each time.

Buyer Questions About This Sliding Door Assembly

Selecting This Track For 1/4 Inch Bypassing Doors

This EPCO plastic door track assembly no. 3 brings together a 3 ft brown plastic track and matching plastic upper guide sized for 1/4 inch bypassing wood and/or glass doors, so it fits small and/or light sliding fronts. The high impact extruded polystyrene construction defines its role as sliding door hardware for lighter panels, giving a unified track and guide system under one part number. For projects matching these door thickness and size parameters, this assembly offers a clearly specified builders hardware option ready to integrate into your sliding door layout.