Plastic Door Track Assembly No. 3 for 1/4" Door 3' L, Gray

Plastic Door Track Assembly No. 3 For 1/4 Inch Doors

Plastic Door Track Assembly No. 3 is EPCO sliding door hardware designed for 1/4 inch by-passing wood and/or glass doors, so it suits light cabinet or closet doors that need to slide past each other cleanly. The assembly is made from high impact, extruded polystyrene, which provides a sturdy plastic track that resists typical knocks in everyday use while keeping movement smooth. The gray color helps the track stay visually discreet behind the doors, which is useful when the hardware should not draw attention. The 3 foot length allows a single continuous run for shorter openings, reducing joints that can interrupt travel. This assembly is part of builders hardware sliding door components, giving installers a focused option when planning bypass door layouts. EPCO branding identifies it as a dedicated sliding door hardware solution for projects that call for plastic track.

Sliding Door Track Details That Support Daily Use

• The door track assembly is specified for 1/4 inch by-passing wood and/or glass doors, so it matches common light door thicknesses and helps panels clear each other without binding in the opening.
• The high impact, extruded polystyrene construction gives the plastic track resilience against routine contact, which helps the sliding motion stay consistent over time on small or light doors.
• The 3 foot long track section provides a continuous sliding surface for shorter spans, reducing transitions that can cause snags and helping doors roll or glide more predictably along the run.
• The gray finish on the plastic components keeps the hardware visually subdued behind the door edges, which suits installations where the track should function quietly in the background.
• The EPCO plastic door track assembly is classified as sliding door hardware within builders hardware, aligning it with typical cabinet, closet, or partition applications that rely on bypass movement.

Installation Fit For 1/4 Inch Bypass Door Runs

This EPCO plastic door track assembly is designed for 1/4 inch by-passing wood and/or glass doors, so it aligns with door panels sized for slender, overlapping tracks. The 3 foot length lets installers position a single straight run over the opening, simplifying layout on small or light doors. Being a plastic track made from high impact, extruded polystyrene, it supports a sliding motion suited to lighter door weights rather than heavy structural panels. The gray color integrates into typical interior hardware schemes, so the visible edge of the track looks coordinated when mounted where users can see the top rail.

Using EPCO Track Assembly No. 3 In Real Projects

Where This Plastic Door Track Assembly Fits Best

The Plastic Door Track Assembly No. 3 is specified for 1/4 inch by-passing wood and/or glass doors, so it fits projects that use slim, overlapping panels, such as light closets, cabinet fronts, or similar sliding openings. As sliding door hardware in the builders hardware category, it pairs naturally with installations where doors need to traverse the same opening without swinging out. The 3 foot long gray plastic track helps span modest-width openings in one piece, which is useful for small or light doors that do not require long multi-section systems. High impact, extruded polystyrene construction positions this track for environments where a plastic guide is preferred over metal, such as interior woodworking, retail fixtures, or residential built-ins that benefit from quieter contact between door and track.

How Track Details Help Bypass Doors Operate Smoothly

The specified use with 1/4 inch by-passing wood and/or glass doors means the EPCO plastic track geometry is oriented around that thickness, so each panel can cross in front of the other without rubbing excessively. High impact, extruded polystyrene gives the track a firm guiding surface, which supports predictable door travel and helps reduce deformation along the run under normal operating conditions on small or light doors. The 3 foot length creates a continuous guiding line for the door edge, limiting mid-span joints that can interrupt gliding and making alignment more straightforward during layout. Its gray color allows the assembly to recede visually against many interior finishes, so attention stays on the door faces while the track continues to guide the panels along their path. Classified as sliding door hardware within builders hardware, this assembly is positioned as a core guiding component in a bypass door system, contributing directly to how smoothly the doors move each time they are opened or closed.

Common Questions About EPCO Sliding Door Track

Select Plastic Door Track Assembly No. 3 For Bypass Runs

The EPCO Plastic Door Track Assembly No. 3 offers a gray, high impact, extruded polystyrene track solution for 1/4 inch by-passing wood and/or glass doors, centered on small and light panels. Its 3 foot length supports straightforward layouts over modest-width openings, while the sliding door hardware classification within builders hardware clarifies its role in bypass assemblies. For projects built around 1/4 inch sliding panels where a plastic guiding surface is preferred, this EPCO track assembly aligns the material, length, and door compatibility into a ready sliding door hardware choice.