Plastic Door Track Assembly No. 3 for 1/4" Door 3' L, Tan
Description
Plastic Door Track Assembly No. 3 For 1/4 Inch Doors
Plastic Door Track Assembly No. 3 gives you a matched track setup for 1/4 inch by-passing wood and/or glass doors, so light cabinet or closet panels move along a defined path instead of dragging in the opening. The EPCO sliding door track is built as a plastic door track assembly in a 3 foot length, which suits shorter openings where a full-length metal system is not required. Its tan color helps the track blend into many light-toned cabinet interiors rather than drawing attention to the hardware. The sliding door hardware design supports small and/or light doors, so the components work in applications where door weight is modest and smooth motion is the main priority.
Key Sliding Door Track Details For Daily Use
- This plastic door track assembly is designed for 1/4 inch by-passing wood and/or glass doors, which lets you build pairs of overlapping panels that slide past each other instead of swinging into the room, helping preserve clearance in tight cabinet or closet layouts.
- The high impact, extruded polystyrene material provides a rigid plastic track body that resists typical bumps from small and/or light doors, which helps the track retain its shape under normal use so the doors stay aligned in their channel.
- The 3 foot long track length suits shorter openings, so installers can match many cabinet or niche widths without on-site splicing, which simplifies layout work when planning sliding door hardware runs.
- The tan finish allows the track assembly to sit visually quiet against many light-colored interiors, which helps projects where visible hardware should recede behind the look of the woodwork or surrounding surface.
Track Assembly Setup And Sliding Door Alignment
This plastic door track assembly uses an EPCO plastic track and guide arrangement tailored for 1/4 inch by-passing doors, so the doors follow a defined channel instead of wandering against the cabinet face. The high impact, extruded polystyrene construction lets the track accept repeated sliding contact from small and/or light doors while maintaining its profile, which supports consistent alignment over time. Because the assembly is 3 foot long, it matches many upper cabinet or small opening spans, reducing cutting work when fitting the track into a run.
Using This EPCO Track Assembly In Real Projects
Where This Plastic Door Track Assembly No. 3 Fits Best
This EPCO plastic door track assembly is specified for 1/4 inch by-passing wood and/or glass doors, so it fits projects where thin panels overlap in front of a carcass or frame. The sliding door hardware category focus makes it suitable for small openings where a compact track is needed rather than a heavy structural rail. The high impact, extruded polystyrene construction means the track body remains stable under the light loads typical of small and/or light doors, which supports smooth operation inside cabinets, wall niches, or shallow storage areas. With a 3 foot long format, the track suits many upper cabinets or shorter spans, so the installer works within that length when planning door width and overlap. The tan color allows the track to sit behind the doors visually, which favors applications where hardware should not dominate the appearance of the interior.
Details That Support Repeatable Bypassing Door Results
The assembly is identified as Plastic Door Track Assembly No. 3 and listed as EPCO part 3-T-3, which ties the track and guide combination to a defined configuration so repeat orders match prior installations. Its design for 1/4 inch by-passing wood and/or glass doors sets the channel geometry for that door thickness, which helps keep matching panels running true along the same path. The high impact, extruded polystyrene material keeps the track profile consistent as small and/or light doors slide across it, which supports repeatable movement without sudden changes in friction. Being 3 foot long allows installers to rely on a single continuous section of track in many short openings, which reduces alignment variables compared to piecing together multiple segments in a short span.
Common Questions About This Sliding Door Track Assembly
What doors is Plastic Door Track Assembly No. 3 designed for?
Plastic Door Track Assembly No. 3 is designed for 1/4 inch by-passing wood and/or glass doors, which suits thin panels that need to overlap and slide past each other.
Why does the material use high impact extruded polystyrene?
The high impact, extruded polystyrene construction gives the track a rigid plastic body that withstands normal contact from small and/or light doors, helping preserve the sliding channel shape.
How long is this EPCO sliding door track assembly?
This EPCO sliding door track assembly is 3 foot long, fitting many cabinet or small opening widths without needing multiple short track sections.
What type of applications suit small and light doors with this track?
The track is recommended for small and/or light doors, suiting upper cabinets, niches, or other modest openings where door weight stays low.
How does the tan color help in cabinet installations?
The tan color lets the track blend with many light-toned interiors, so the sliding door hardware remains unobtrusive behind the wood or glass fronts.
What does the EPCO part number 3-T-3 indicate?
The EPCO part number 3-T-3 identifies this specific Plastic Door Track Assembly No. 3 configuration, helping match the same track setup across multiple projects.
Select This Track Assembly For 1/4 Inch Bypassing Doors
Choose Plastic Door Track Assembly No. 3 when a 3 foot tan EPCO sliding door track is needed for 1/4 inch by-passing wood and/or glass doors. Its high impact, extruded polystyrene construction and small and/or light door focus support straightforward sliding door hardware layouts on cabinet or niche projects where a compact, defined track channel is required.