Plastic Door Track Assembly No. 3 for 1/4" Door 4' L, Tan

Plastic Door Track Assembly For 1/4 Inch Doors

Plastic Door Track Assembly No. 3 for 1/4" Door 4' L, Tan is EPCO sliding door hardware designed for by-passing wood and/or glass doors, so it gives cabinet or closet doors a guided path that supports smooth travel. The assembly is specified for 1/4 inch doors, which focuses its use on small and/or light doors where a compact track profile is useful during layout. The 4 foot length provides a single, continuous run for shorter spans, reducing joint transitions along the sliding route. The track is made from high impact, extruded polystyrene, which provides a durable plastic profile that resists everyday door movement along the guide surface. Its tan color blends with many light wood tones, which helps the track visually recede around finished cabinetry. As EPCO sliding door hardware, this assembly fits into builders hardware workflows where consistent, repeatable sliding action is needed for light doors.

Key Sliding Track Details For Daily Use

• Design for 1/4 inch by-passing wood and/or glass doors focuses the assembly on lighter door panels, which helps installers match the track capacity to cabinet, closet, or similar light-duty sliding applications.
• High impact, extruded polystyrene construction creates a plastic track body that withstands door movement along the guide surface, supporting repeated sliding cycles in typical woodworking and casework environments.
• 4 foot long track length provides a continuous guiding surface across many cabinet or small opening widths, which simplifies layout by reducing splices and alignment breaks along the sliding run.
• Tan finish on the plastic track allows the hardware to sit close in tone to many light wood finishes, which helps the installed track stay visually unobtrusive around door edges and interior cabinet faces.
• Builders hardware classification within sliding door hardware places this EPCO assembly in a familiar category for shop planners, which streamlines product selection when standard by-passing door guides are required.

Installation Conditions For This EPCO Track

This EPCO plastic track kit for 1/4 inch doors centers its fit around small and/or light by-passing wood and/or glass doors, so planning door size and weight within that range supports smooth operation along the guide. The 4 foot long profile works well where a single-span track can cover the opening, which simplifies installation by avoiding multiple sections that require field alignment. Because the track is formed from high impact, extruded polystyrene, it provides a stable plastic channel that accepts regular sliding contact from matching door hardware, supporting predictable movement under normal interior use. The tan color of the assembly lets it sit quietly behind or above the doors, which suits finished woodworking where visible hardware should remain understated.

Using This Sliding Door Hardware In Projects

Where This Plastic Door Track Assembly Fits

This EPCO plastic door track assembly No. 3 is specified for 1/4 inch by-passing wood and/or glass doors, so it fits projects that use slim, small, or light door panels in residential or shop-built casework. Builders hardware and sliding door hardware classification place it naturally in cabinet, wardrobe, and light partition applications where by-passing action is desired instead of swinging hinges. The 4 foot length gives flexibility for many cabinet and closet openings, allowing installers to position the track to span the full width of the doors while keeping the profile manageable for on-site cutting when layouts demand shorter runs. High impact, extruded polystyrene construction creates a shaped plastic guide that supports repeated movement, so the track can serve both primary cabinet doors and secondary access panels that see frequent operation.

Details That Support Repeatable Sliding Results

The specification for 1/4 inch doors defines a consistent interface dimension, which helps installers standardize grooves or edge fittings in wood doors or the capture method for glass doors to suit this EPCO track. High impact, extruded polystyrene material provides a relatively tough yet workable plastic, allowing the track to maintain its guiding shape under regular by-passing door travel while remaining light enough for straightforward handling during installation. The 4 foot long tan profile supports clean, repeatable layouts, because one continuous section reduces potential misalignment points that can create drag or binding along the slide path. Within sliding door hardware, this combination of matched door thickness, defined track length, and impact-resistant plastic supports predictable performance in woodworking shops that repeat similar cabinet or closet designs across multiple jobs.

Common Questions About This EPCO Track Kit

Select This Track Kit For 1/4 Inch Doors

Choose this EPCO Plastic Door Track Assembly No. 3 for 1/4" Door 4' L, Tan when a high impact, extruded polystyrene guide suits your 1/4 inch by-passing wood and/or glass doors, and a 4 foot tan track aligns with your cabinet or closet opening layout.