1/4" x 48" Sliding Track, Gray Finish

1/4 x 48 Sliding Track For Small Doors

1/4 x 48 Sliding Track identifies this EPCO kit as a 4 ft long track solution designed for 1/4 inch by-passing wood and/or glass doors, so it fits common light cabinet or closet bypass door layouts that use slim door panels. The track is manufactured from high impact, extruded polystyrene, which creates a plastic running surface that helps doors slide smoothly while resisting typical knocks and wear in everyday use. The gray finish on the track provides a neutral appearance that blends into most interiors, keeping the focus on the doors while still looking finished on exposed installations. The kit is classified as sliding door hardware, which positions it for builders hardware applications where compact bypass action saves swing space in front of the opening. EPCO branding and the 3-G-4 manufacturer part number give a precise reference for repeat jobs, service calls, or matching existing installations in the field.

Sliding Track Details That Support Daily Use

• The track is designed for 1/4 inch by-passing wood and/or glass doors, so it suits slim door constructions where two panels need to pass in front of one another without binding in the opening.
• High impact, extruded polystyrene construction creates a tough plastic profile that helps maintain track shape under normal door movement, supporting consistent sliding action on small and/or light doors.
• The gray finish offers a neutral color that sits quietly behind most door materials, which helps the installation look intentional whether the track is partially visible or mounted within a cabinet opening.
• The track length of 4 ft gives a defined span for short openings, allowing straightforward layout for cabinets or small door runs that fall within that dimension.
• The kit is positioned in the sliding door hardware product class, so it can be integrated into broader builders hardware plans where compact, by-passing motion is preferred over swinging doors.

Track Layout And Fit For 1/4 Inch Doors

This EPCO sliding door hardware is specified for 1/4 inch by-passing wood and/or glass doors, giving a clear target door thickness so layout work can be coordinated around that dimension when planning stiles and overlaps. The kit uses high impact, extruded polystyrene for the sliding track body, which provides a consistent molded profile that supports clean fit between the door edges and the running channel. The 4 ft overall track length helps installers size the opening and align stops or end conditions around a known dimension. The gray finish on the track offers a predictable visual line across the top of the doors, which simplifies decisions about where to expose or conceal the track within the surrounding construction.

Using This EPCO Sliding Track In Projects

Where This Sliding Door Hardware Fits Best

This EPCO sliding door hardware is identified for 1/4 inch by-passing wood and/or glass doors, aligning it with small and/or light doors that benefit from a compact overhead guide channel. The 4 ft long track suits shorter spans such as cabinet openings, small wall niches, or similar situations where a limited run is sufficient for full door travel. Its classification under builders hardware and sliding door hardware places it in projects where conserving swing space in front of the opening matters, such as narrow walkways or tight shop environments. The gray finish supports use in visible locations because it presents a consistent color line that works with both painted wood and many glass framing treatments.

Design Details That Support Repeatable Sliding Action

The high impact, extruded polystyrene construction of the track creates a uniform plastic channel, which helps doors track predictably along the length without the variations that can occur in less controlled profiles. The track is specified for small and/or light doors, matching the material strength and channel geometry to door weights that suit a compact plastic system. The 4 ft length gives a fixed reference that aids in repeating the same layout across multiple cabinets or openings, supporting consistent door travel from unit to unit. The use for 1/4 inch by-passing doors means the channel relationship is tuned to that thickness, helping reduce side play and promoting smoother sliding when the doors overlap during operation.

Common Questions About The 3-G-4 Sliding Track

Select This Sliding Track For 1/4 Inch Doors

The EPCO 1/4 x 48 Sliding Track with gray finish provides a defined 4 ft high impact, extruded polystyrene channel tailored to 1/4 inch by-passing wood and/or glass doors, giving a clear match for small and/or light sliding panels. Using a track built specifically for this door thickness and application supports smoother operation and a cleaner visual line in cabinets, small closets, or similar openings. For projects that call for compact sliding door hardware within builders hardware layouts, this 3-G-4 sliding track kit aligns the door thickness, span, and material into one coordinated solution.