Plastic Door Track Assembly No. 3 for 1/4" Door 5' L, Tan

Plastic Door Track Assembly No. 3 For Bypassing Doors

Plastic door track assembly No. 3 for 1/4 inch door 5 foot L, tan sets up a guided path for 1/4 inch by-passing wood and/or glass doors, so small and/or light doors move along a defined line instead of wandering or rubbing. This EPCO sliding door hardware uses high impact, extruded polystyrene, which resists cracking under normal sliding loads and helps maintain a consistent track surface over time. The assembly is designed specifically for 1/4 inch thick doors, so the guide relationship matches that door thickness and keeps the panel aligned while it moves. The 5 foot length provides continuous support along typical cabinet or closet openings, which reduces sagging points and helps doors stay in their track throughout the travel. The tan color blends into many light wood or neutral installations, helping the hardware visually recede when the doors are in place.

Key Sliding Door Track Details For Installers

• The EPCO plastic door track assembly is part of the sliding door hardware class, so it fills the guiding role in a bypass system where smooth tracking is needed for function and reduced callbacks.
• The design is intended for 1/4 inch by-passing wood and/or glass doors, so installers can match it to light cabinet or closet panels that share this thickness and maintain predictable door clearance.
• The track is recommended for small and/or light doors, focusing its use on situations where lower panel weight pairs well with the high impact plastic to manage wear without overbuilding the hardware.
• The high impact, extruded polystyrene material creates a rigid yet impact-resistant track surface, helping the guide area tolerate repeated sliding and minor knocks during everyday use.
• The 5 foot long configuration spans many standard cabinet or casework openings in a single piece, reducing joint interruptions that can catch rollers or edges and interrupt the door movement.

Sliding Door Track Assembly Fit And Layout

This EPCO plastic door track assembly No. 3 is built around 1/4 inch by-passing wood and/or glass doors, so layout revolves around that door thickness and the corresponding channel relationship. Because it is recommended for small and/or light doors, it suits upper cabinets, small closets, or comparable openings where panel weight is modest and a high impact plastic track is appropriate. The 5 foot length supports planning a continuous straight run, so installers can align the track with the opening edges and avoid mid-span joints that complicate layout. The tan color provides a neutral visual line above or below many door finishes, which can simplify aesthetic decisions on exposed tracks within woodworking projects.

Using EPCO Plastic Track Kit In Real Projects

Where This Sliding Door Track Assembly Fits Best

This sliding door hardware is specified for 1/4 inch by-passing wood and/or glass doors, so it fits projects built around thin panels such as light cabinet doors, shallow closet doors, or similar casework fronts. The recommendation for small and/or light doors points it toward applications where door size and mass are modest, like upper run storage or residential-style built-ins, aligning the hardware capacity with typical panel dimensions in these jobs. The 5 foot long track allows a single piece to cover many of these openings end to end, which supports door pairs that travel across the full width without encountering a splice line. Because the track assembly is constructed from high impact, extruded polystyrene, it suits interior environments where a rigid non-metallic guide is preferred, aligning with woodworking projects that integrate plastic tracks into the cabinet or frame structure.

Details That Support Smooth Sliding Performance

The plastic door track assembly uses high impact, extruded polystyrene, giving the guide and track a stable profile that resists chipping at the running surfaces, so the sliding path stays more consistent over repeated cycles. The assembly is identified as EPCO part number 3-T-5, which ties directly to the No. 3 track design for 1/4 inch doors and helps match this layout to drawings or repeat orders for the same configuration. It is described as plastic door track assembly No. 3 for 1/4 inch door 5 foot L, tan, so the critical traits - door thickness, length, and color - are fixed for predictable repeat use across multiple cabinets in the same project. The web description notes the plastic upper guide number 2214 and plastic track number 214, so the guide and track profiles in this assembly share a known relationship and help maintain alignment between the door edge and the channel. As part of the sliding door hardware class, this assembly provides the supporting path that lets by-passing doors share an opening, which matters when planning overlap and clearances in woodworking layouts.

Common Questions About EPCO No. 3 Door Track

Selecting This Track For 1/4 Inch Bypassing Doors

The EPCO plastic door track assembly No. 3 for 1/4 inch door 5 foot L, tan is built for 1/4 inch by-passing wood and/or glass doors, so it directly aligns with thin panel layouts. Its high impact, extruded polystyrene construction and 5 foot length support small and/or light doors across typical cabinet or closet openings. When a project calls for sliding door hardware that pairs a plastic upper guide number 2214 with plastic track number 214, this sliding door hardware configuration from Wurth Baer Supply provides that defined relationship and a consistent tan track line for repeating across multiple openings.